BHBPP - SPEED-E SOLDERING

  • MSDS: BHBPP
  • Manufacturer: WHIP MIX CORP
  • Product Name: SPEED-E SOLDERING
  • National Stock Number: 6520-00F008886
Product Identification

Product ID:SPEED-E SOLDERING
MSDS Date:11/22/1991
FSC:6520
NIIN:00F008886
MSDS Number: BHBPP

Responsible Party
WHIP MIX CORP
361 FARMINGTON AVE
LOUISVILLE, KY 40217
US

Emergency Phone: 502-637-1451

Info Phone: 502-637-1451

Preparer: DONNA RINGO

Cage: FO376

Contractor
WHIP-MIX CORP
LOUISVILLE, KY 40217 US

Telephone: 502-637-1451

Cage: 12164

Ingredients

SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


SILICA CRYSTALLINE, SILICA (CRISTOBALITE) (SUSPECTED HUMAN

CAS: 14464-46-1

RTECS: VV7325000

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.05 MG/M3 RDUST9293


NUISANCE DUST

OSHA PEL 5 MG/CUM (DUST)

ACGIH TLV: 5 MG/CUM (DUST)

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION. SKIN/EYES:
DRYNESS & IRRITATION.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: LUNG DAMAGE, SILICOSIS.

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Unusual Fire/Explosion Hazard:THIS MATERIAL POSES NO FIRE OR EXPLOSION
HAZARD

Accidental Release

Spill Release Procedures:VACUUM; AVOID CREATING DUST. AVOID WASHING
DOWN DRAINS AS MATERIAL PLUGS DRAINS.

Handling

Handling and Storage Precautions:MINIMIZE DUST GENERATION AT ALL TIMES.
MAY SOLIDIFY IF CONTACTED BY WATER.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR TO AVOID EXPOSURE
ABOVE RECOMMENDED LIMITS
Work Hygienic Practices:WASH AFTER HANDLING.
Supplemental Safety and Health

Chemical Properties

Spec Gravity:3
Solubility in Water:SLIGHT
Appearance and Odor:ODORLESS POWDER

Stability

Stability Indicator/Materials to Avoid:YES
HYDROFLUORIC ACID
Stability Condition to Avoid:MAY SOLIDIFY IF CONTACTED BY WATER

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.