BHBSK - N-1433A 383 GREEN SLOWER DRY

  • MSDS: BHBSK
  • Manufacturer: NILES CHEMICAL PAINT CO
  • Product Name: N-1433A 383 GREEN SLOWER DRY
  • National Stock Number: 8010-01-260-0911
Product Identification

Product ID:N-1433A 383 GREEN SLOWER DRY
MSDS Date:10/11/1989
FSC:8010
NIIN:01-260-0911
Kit Part:Y
MSDS Number: BHBSK

Responsible Party
NILES CHEMICAL PAINT CO.
225 FORT STREET
NILES, MI 49120
US

Emergency Phone: 219-236-5856

Info Phone: 616-683-3377

Preparer: MIKE LICHATOWICH

Cage: 02388

Contractor
NILES CHEMICAL PAINT
307 NILES, MI 49120 US

Telephone: 616-683-3377/219-236-5856

Cage: 02388

Ingredients

METHYL N-AMYL KETONE

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 22%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9192


CHROMIUM (III) OXIDE

CAS: 1308-38-9

RTECS: GB6475000

Fraction By Weight: 15%

OSHA PEL 0.5 MG/M3 (CR)

ACGIH TLV: 0.5 MG/M3 (CR); 8990


POLYESTER RESIN

Fraction By Weight: 14%


METHYL PROPYL KETONE (2-PENTANONE)

CAS: 107-87-9

RTECS: SA7875000

Fraction By Weight: 6%

OSHA PEL 200 PPM/250 STEL

ACGIH TLV: 200 PPM/250STEL;9192

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Health Hazards Acute and Chronic:SEVERE IRRITATION, REDNESS, BLURRED
VISION,GASTROINTESTINAL IRRITATION,ABDOMINALPAIN, NAUSEA, VOMITING,
DIARRHEA. CHRONIC: NARCOSIS, COMA, HISTOLOGIC FIBROSIS OF THE
LUNGS, INCOHERENCE, CORNEAL VACUO LIZATION, ANOREXIA.
Effects of Overexposure:DIZZINESS, DROWSINESS, WEAKNESS, FATIQUE,
CONFUSION, NAUSEA, HEADACHE, VERTIGO, POSSIBLE UNCONSCIOUSNESS,
EVEN ASPHYXIATION.

First Aid

First Aid:INHALE:MOVE VICTIM TO FRESH AIR.IF BREATHING HAS STOPPED GIVE
CPR. IMMED FLUSH SKIN WITH PLENTY OF WATER.IMMED
REMOVE CONTAMINATED CLOTHING.EYE: IMMED FLUSH EYES WITH LARGE
AMOUNTS OF W ATER FOR 15 MIN.OCCASIONALLY LIFT
EYE-LIDS.INGEST:DRINK 1 OR 2 GLASSES OF WATER. DO NOT INDUCE
VOMITING. GET MEDICAL ATTENTION IN ALL OF THE ABOVE CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:46 F/7.7 C
Lower Limits:1.0
Upper Limits:8.2
Extinguishing Media:DRY CHEMICAL , FOAM, CO2
Fire Fighting Procedures:WEAR SCBA AND FULL PROTECTIVE CLOTH.WATER MAY
BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD UP AND
POSSIBLE AUTO IGNITION OR EXPLOSION.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. VAPORS
ARE HEAVIER THAN AIR AND MAY TRAVEL ALONGTHE GROUND. ISOLATE FROM
HEAT, SPARKS AND OPEN FLAME. CLOSED CONT. MAY EXPLODE.

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. MINIMIZE THE
BREATH OF VAPORS AND AVOID SKIN CONTACT.ABSORB WITH INERT
MATERIAL.SHOVEL RECLAIMED LIQUID AND ABSORBENT INTO
RECOVERY/SALVAGE DRUMS FOR DISPOSAL DIKE IF NECESSARY.

Handling

Handling and Storage Precautions:AVOID STORAGE IN HIGH TEMPERATURE
AREAS OR NEAR FIRE OR OPEN FLAME. KEEP CONTAINERS CLOSED WHEN
NOT IN USE. AVOID ROUGH HANDLING.
Other Precautions:CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN
EMPTY. DO NOT WELD OR FLAME CUT ON EMPTY DRUMS.

Exposure Controls

Respiratory Protection:WEAR AN APPROPIATE PROPERLY FITTED RESPIRATOR
NIOSH/MISHA DURING AND AFTER APPLICATION UNLESS AIR MONITORING
DEMONSTRATES VAPOR/ MIST ARE BELOW THE APPLICABLE LIMITS. FOLLOW
RESPIRATORS MANUFACTURERS DIRECTIONS BEFORE USE.
Ventilation:SUFFICIENT VENTILATION.REMOVE DECOMPOSITION PRODUCTS FORMED
DURING WELDING/FLAME CUTTING OF SURFACES COATED WITH PROD.
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:CHEMICAL GOGGLES/SAFETY GLASSES
Other Protective Equipment:CHEMCIAL RESISTANT CLOTHING.
Work Hygienic Practices:WASH HANDS BEFORE EATING, DRINKING,SMOKING OR
USING THE RESTROOM.
Supplemental Safety and Health
NK

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:213-289F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THEN ETHER
Solubility in Water:SLIGHT
Appearance and Odor:LIQUID ODOR OF SOLVENTS
Percent Volatiles by Volume:55.17

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES
Stability Condition to Avoid:HIGH TEMPERATURE, SHOCK FROM DROPPING.
Hazardous Decomposition Products:CARBON MONOXIDE CARBON DIOXIDE
Conditions to Avoid Polymerization:HIGH TEMPERTURES, SHOCK FROM
DROPPING.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH APPLICABLE LOCAL,
STATE,AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.