BHCBL - ENAMEL ALKYD GLOSS 51 GREEN 14110 ID742422

  • MSDS: BHCBL
  • Manufacturer: PRATT AND LAMBERT INC
  • Product Name: ENAMEL ALKYD GLOSS 51 GREEN 14110 ID742422
  • National Stock Number: 8010-00-286-7748
Product Identification

Product ID:ENAMEL ALKYD GLOSS 51 GREEN 14110 ID742422
MSDS Date:03/22/1988
FSC:8010
NIIN:00-286-7748
MSDS Number: BHCBL

Responsible Party
PRATT & LAMBERT, INC.
16116 E 13TH ST
WICHITA, KS 67201
US

Preparer: W.A. ELLISON

Cage: FO127

Contractor
PRATT AND LAMBERT INC
22 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

LEAD CHROMATE (OSHA PEL FOR LEAD FROM 29CFR

CAS: 7758-97-6

RTECS: GB2975000

OSHA PEL 0.05 MG/M3 (PB)

ACGIH TLV: 0.05MG/M3(CR)A2;8990


VM&P NAPHTHA (LIGROINE)

CAS: 8032-32-4

RTECS: OI6180000

OSHA PEL 300 PPM/400 STEL

ACGIH TLV: 300 PPM; 9192


MINERAL SPIRITS (VP MM HG @ 20 DEG C)

CAS: 64475-85-0

RTECS: PY8240000

OSHA PEL 500 PPM 2950 MG/CUM

ACGIH TLV: 100 PPM 525 MG/CUM


VOL ORGANIC CMPD 5.1 LB/GL LESS WATER & NPRS* 612 G/L LESS

RTECS: 9999999VO


METHYL ETHYL KETONE (SOLVENT) (SARA III) (VAPOR PRESSURE 70

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 5%

OSHA PEL 200 PPM/STEL 300 PPM

ACGIH TLV: 200 PPM/STEL 300 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


MINERAL SPIRITS (SOLVENT) (VAPOR PRESSURE 2 MM HG @ 20C)

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: <5%

OSHA PEL 100 PPM/ 525 MG/M3

ACGIH TLV: 100 PPM/ 525 MG/M3


LIGROIN (PETROLEUM HYDROCARBON MIXTURE) (SOLVENT)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: <5%

OSHA PEL 100 PPM/ 525 MG/M3

ACGIH TLV: 100 PPM/ 525 MG/M3


2.96 LB/GAL LESS WATER AND NEGLIGIBLY PHOTOCHEMICALLY

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SWALLOWING-DO NOT INDUCE VOMITING.GET
MED ATTN.INHALATION-MOVE TO FRESH AIR, KEEP WARM & QUIET, GET MED
ATTN. EYE-FLUSH WITH LARGE AMOUNTS OF WATER. GET MED ATTN.
SKIN-REMOVE CONTAMINATED CLOTHING. WA SH AFFECTED AREA.NOTE TO
PHYSICIAN.OVEREXPOSURE SHOULD BE DIRECTED AT THE CONTROL OF
SYMPTOMS AND THE CLINICAL COND.
Explanation of Carcinogenicity:CHROMIUM AND CERTAIN CHROMIUM COMPOUNDS
ARE LISTED AS POTENTIAL CARCINOGENS BY THE NTP AND IARC.
Effects of Overexposure:PROLONGED & REPEATED OCCUPATION OVEREXPOSURE TO
INSOLUBLE CHROMATES MAY CAUSE LUNG CANCER. OVEREXPOSURE TO LEAD MAY
RESULT IN SEVERE DAMAGE TO BLOOD FORMING, NERVOUS,URINARY AND
REPRODUCTIVE SYSTEMS. OVEREXPOSURE INCLUDE LOSS OF
APPETITE/METALLIC
TASTE/ANXIETY/CONSTIPATION/NAUSEA/WEAKNESS/INSOMNIA/HEADACHE/COLIC.
Medical Cond Aggravated by Exposure:NONE LISTED.

First Aid

First Aid:SEE ABOVE.

Fire Fighting

Flash Point:102F/48.89C
Extinguishing Media:CLASS B FIRE EXTINGUISHERS FOR FLAMMABLE LIQUID
FIRES. POLYMER FOAM IS PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. WATER
MAY BE USED TO COOL EXPOSED CONTAINERS TO PREVENT PRESSURE
BUILD-UP/AUTO-IGNITION/EXPLOSION WHEN EXPOSED TO HEAT.
Unusual Fire/Explosion Hazard:ISOLATE FOR HEAT/ELECTRICAL
EQUIPMENT/SPARKS/FLAME.KEEP CONTAINRS CLOSED.OVEREXPOSURE TO
DECOMPOSITION MAY CAUSE A HEALTH HAZARD.OBTAIN MED ATTN.

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES.DIKE WITH INERT
MATERIAL. PUT IN METAL CONTAINERS FOR RECOVERY OR DISPOSAL. USE
ONLY NON-SPARKING TOOLS. PREVENT CONTAMINATION OF
SEWERS/STREAMS/GROUNDWATER WITH SPILLED MATERIAL OR USED
ABSORBENT.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 95F. STORE LARGE
QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106. RCRA
CLASSIFICATION WOULD BE D001. HAZARDOUS WASTE NUMBER D008.
Other Precautions:DO NOT TAKE INTERNALLY. DO NOT WELD/BRAZE/CUT ON
EMPTY CONTAINER.DO NOT RE-USE ANY CONTAINERS. NEVER USE PRESSURE TO
EMPTY. DRUM IS NOT A PRESSURE VESSEL. CONTAINERS SHOULD BE GROUNDED
AND BONDED TO T HE RECEIVING CONTAINER.

Exposure Controls

Respiratory Protection:IN RESTRICTED VENTILATION AREAS A NIOSH APPROVED
CHEMICAL CARTRIDGE RESPIRATOR MAY BE REQUIRED.IN CONFINED AREAS USE
A NIOSH/MSHA AIR SUPPLIED RESPIRATOR.REFER TO OSHA 29CFR1910.134.
REFER TO OSHA FOR LEAD-29CFR1910.1025.
Ventilation:GENERAL DILUTION & LOCAL EXHAUST VENTILATION. REMOVE
DECOMPOSITION PROD THAT ARE GENERATED WHEN WELDING/CUTTING/BRAZING.
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:WEAR SAFETY SPECTACLES.
Other Protective Equipment:NOT LIKELY TO BE NEEDED.
Work Hygienic Practices:WASH HANDS AND FACE THOROUGHLY BEFORE EATING OR
SMOKING.
Supplemental Safety and Health
DO NO BREATH SANDING DUST.

Chemical Properties

Boiling Pt:B.P. Text:280F/388F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:60

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
IGNITION.
Hazardous Decomposition Products:BURNING/WELDING/CUTTING WILL PRODUCE
SMOKE,CARBON MONOXIDE AND CARBON DIOXIDE.IN ADDITION,OXIDES OF LEAD
MAY BE GENER.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT,SPARKS AND
FLAME.

Disposal

Waste Disposal Methods:INCINERATE IN EPA PERMITTED
FACILITY.CONTAMINATED ABSORBANT MAY BE DISPOSED OF IN A HAZARDOUS
WASTE LANDFILL. DISPOSE IAW FED/ST/LOCAL REGULATIONS.DO NOT
INCINERATE CLOSED CONTAINERS.OBSERVE PRECAUTIO NS FOR DISPOSAL OF
FLAMMABLE MATERIALS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.