BHCVZ - COATING, POLYURETHANE AIRCRAFT GREEN 34031

  • MSDS: BHCVZ
  • Manufacturer: PRATT AND LAMBERT INC
  • Product Name: COATING, POLYURETHANE AIRCRAFT GREEN 34031
  • National Stock Number: 8010-01-131-6255
Product Identification

Product ID:COATING, POLYURETHANE AIRCRAFT GREEN 34031
MSDS Date:10/14/1988
FSC:8010
NIIN:01-131-6255
MSDS Number: BHCVZ

Responsible Party
PRATT & LAMBERT, INC.
16116 E 13TH ST
WICHITA, KS 67201
US

Preparer: W.A. ELLISON

Cage: FO127

Contractor
PRATT AND LAMBERT INC
22 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


1,6-DIISOCYANATOHEXANE (HEXAMETHYLENE DIISOCYANATE)

CAS: 822-06-0

RTECS: MO1740000

ACGIH TLV: 0.005 PPM; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


VOL ORGANIC CMPD 2.2 LB/GL LESS WATER & NPRS* 264 G/L LESS

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:SWALLOWING-MAY BE FATAL IF SWALLOWED.
CAN CAUSE GASTROINTESTINAL/NAUSEA/VOMITING.ASPIRATION OF MATERIAL
INTO LUNG MAY CAUSE PNEUMONITIS. INHALATION:WARNING VAPOR AND SPRAY
MIST HARMFUL. MAY CAUSE LUNG DAMAGE.EYE & SKIN IRRITATION: MAY
CAUSE SKIN SENSITIZATION.
Effects of Overexposure:EXPOSURE TO DIISOCYANATES MAY RESULT IN
RESPIRATORY SENSITIZATION. OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE. RESPIRATORY SENSITIVITY RESULTS IN
ASTHMA-LIKE SYMPTOMS ON S UBSEQUENT EXPOSURE AT CONCENTRATIONS EVEN
BELOW THE TLV.
Medical Cond Aggravated by Exposure:SEE ABOVE.

First Aid

First Aid:SWALLOWING: DO NOT INDUCE VOMITING. GET MEDICAL ATTN
IMMEDIATELY. INHALATION: REMOVE TO FRESH AIR.KEEP WARM AND QUIET
GET MED ATTN. EYE:WASH WITH WATER,GET MED ATTN. SKIN:WASH AFFECTED
AREA,OBTAIN MED ATTN IF IRRITATION PERSISTS. NOTE TO PHYSICIAN:
ANY TREATMENT THAT MIGHT BE REQUIRED FOR OVEREXPOSURE SHOULD BE
DIRECTED AT THE CONTROL OF SYMPTOMS AND THE CLINICAL CONDITIONS.

Fire Fighting

Flash Point:72F/22.22C
Extinguishing Media:CLASS B FIRE EXTINGUISHERS. POLYMER FOAM IS
PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. WATER
MAY BE USED TO COOL EXPOSED CONTAINERS TO PREVENT AUTO-IGNITION OR
EXPLOSION. FOG NOZZLES PREFERRED IF WATER USED
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMPOSITION PRODUCTS
MAY CAUSE A HEALTH HAZARD. SYMPTOMS MAY NOT BE IMMEDIATELY
APPARENT. OBTAIN MEDICAL ATTENTION.

Accidental Release

Spill Release Procedures:USE NIOSH/MSHA APPROVED TC19C. ELIMINATE ALL
IGNITION SOURCES. DIKE WITH INERT MATERIAL. FOR RECOVERY OR
DISPOSAL USE METAL CONTAINERS. USE ONLY NON-SPARKING TOOLS. PREVENT
CONTAMINATION OF SEWERS,STR EAMS,GROUNDWATER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 95F. STORE LARGE
QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106.
Other Precautions:THIS PRODUCT SHOULD NOT BE USED BY PERSONS WHO HAVE
HAD CHRONIC BREATHING PROBLEMS OR REACTIONS TO ISOCYANATES. DO NOT
BREATH VAPOR SPRAY OR MIST. DO NOT GET ON SKIN, IN EYES OR ON
CLOTHING. WASH THOR OUGHLY AFTER HANDLING.

Exposure Controls

Respiratory Protection:WEAR POSITIVE PRESSURE AIR SUPPLIED RESPIRATOR
(TC 19C NIOSH/MSHA) WHILE EXPOSED.IF NOT AVAILABLE USE A VAPOR
PARTICULATE RESPIRATOR. WEAR FOR THE WHOLE TIME WHILE MIXING,
SPRAYING AND UNTIL VAPORS AN D MISTS ARE GONE.
Ventilation:GENERAL DILUTION AND LOCAL EXHAUST VENTILATION IN
SUFFICIENT VOLUME AND PATTERN TO MAINTAIN CONCENTRATIONS.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:SAFETY SPECTACLES & CHEM SPLASH GOGGLES.
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
HAZARDOUS DECOMPOSITION PRODUCTS: THE REACTION OF ISOCYANATES WITH
WATER MAY PRODUCE HYDROGEN GAS WHICH MAY FORM FLAMMABE OR EXPLOSIVE
MIXTURES WITH AIR. DO NOT WELD/BRAZE/CUT ON CONTAINER. DO NOT REU
SE.

Chemical Properties

Boiling Pt:B.P. Text:260F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:30

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS, OXIDIZING MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
IGNITION.
Hazardous Decomposition Products:BURNING/WELDING/CUTTING WILL PRODUCE
SMOKE,CARBON MONOXIDE AND CARBON DIOXIDE. OXIDES OF NITROGEN MAY BE
GENERATED.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT,SPARKS AND
FLAME.

Disposal

Waste Disposal Methods:INCINERATE ONLY IN EPA FACILITY. CONTAMINATED
ABSORBENT DISPOSED IN A HAZARDOUS WASTE LANDFILL. DISPOSE ONLY IAW
FEDERAL/STATE/LOCAL REGULATIONS. RCRA CLASSIFICATION WOULD BE D001.
ENVIRONMENTAL HAZAR DS NONE KNOWN.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.