BHCYP - ZN DUST PRIMER

  • MSDS: BHCYP
  • Manufacturer: DAVLIN PAINT CO
  • Product Name: ZN DUST PRIMER
  • National Stock Number: 8010-00-165-8560
Product Identification

Product ID:ZN DUST PRIMER
MSDS Date:04/26/1988
FSC:8010
NIIN:00-165-8560
Kit Part:Y
MSDS Number: BHCYP

Responsible Party
DAVLIN PAINT CO.
1401 E 14TH
BERKELEY, CA 94702
US

Emergency Phone: 415-889-7098

Info Phone: 415-848-2863

Preparer: PATRICIA SHAW

Cage: DO185

Contractor
DAVLIN PAINT CO.
2308 BERKELEY, CA 94702 US

Telephone: 415-889-7098

Cage: DO185

Ingredients

ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 15%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293


VM&P NAPHTHA (LIGROINE)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: < 5.0%

OSHA PEL 300 PPM/400 STEL

ACGIH TLV: 300 PPM; 9192


ZINC DUST

CAS: 7440-66-6

Fraction By Weight: 60%

ACGIH TLV: 15 MG/M3

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:SYMPTOMS: NASAL AND RESPIRATORY IRRITATION,
DIZZINESS, WEAKNESS, FATIGUE, NAUSEAAND HEADACHE. HIGH
CONCENTRATIONS MAY RESULT IN NARCOSIS (CENTRAL NERVOUS
SYSTEMDEPRESSION). EYE: SEVERE IRRITATION, TEA RING, REDNESS AND
BLURRED VISION.SKIN: PROLONGED/REPEATED EXPOSURE CAN CAUSE
IRRITATION, DEFATTING, & DERMITITIS.
Medical Cond Aggravated by Exposure:RESPIRATORY TRACT IRRITATION,
DERMITITIS, NAUSEA.

First Aid

First Aid:EYE: FLUSH EYES WITH WATER FOR AT LEAST 15 MINUTES. GET
MEDICAL HELP. SKIN: RE- MOVE CONTAMINATED CLOTHING, WASH THOROUGHLY
WITH SOAP AND WATER. INHALATION: RE-MOVE VICTIM TO FRESH AIR. APPLY
CPR OR A DMINISTER OXYGEN IF NEEDED. CONSULT DR.INGESTION: GIVE
WATER OR MILK TO DRINK AND TELEPHONE FOR MEDICAL ADVICE. DO NOT
INDUCE VOMITING UNLESS DIRECTED TO DO SO BY MEDICAL PERSONNEL.

Fire Fighting

Flash Point Method:SCC
Flash Point:105F
Lower Limits:1.0
Upper Limits:6.1
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE NATIONAL FIRE PROTECTION ASSOCIATION CLASS
B EXTINGUISHERS.APPROVED GAS MASKREQUIRED. WATER MAY BE
INEFFECTIVE,BUT MAY BE USED AS FOG FOR COOLING.
Unusual Fire/Explosion Hazard:VAPORS FORM AN EXPLOSIVE MIXTURE WITH AIR
BETWEEN LOWER & UPPER EXPLOSIVE LIMITSWHICH CAN BE IGNITED BY MANY
SOURCES. CLOSED CONTAINERS MAY EXPLODE WHN HEAT EXP

Accidental Release

Spill Release Procedures:EVACUATE ALL NON-ESSENTIAL PERSONNEL. REMOVE
ALL IGNITION SOURCES. VENTILATE AREA. EQUIP EMPLOYEES WITH
APPROPRIATE EQUIPMENT.DIKE AROUND THE SPILLEDAREA. COVER SPILL WITH
INERT ABSORBANT AND TRANS- FER USING NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:STORE BELOW 80F IN CLOSED
CONTAINER.STORE IN ORIG.CONTAINER.AVOID FLAMES & HIGH TEMPS. DO NOT
STORE NEAR OXIDIZING AGENTS OR ACIDS.
Other Precautions:DO NOT TAKE INTERNALLY, AVOID PROLONGED INHALATION.
GROUND ALL CONNECTIONS, CON-TAINERS, ETC. WHEN POURING OR
TRANSFERRING TO MINIMIZE STATIC ELECTRICITY. USE NON-SPARKING
TOOLS. AVOID COMBUSTION OF CONTAM. RAGS BY IMMED.IMMERSION IN
WATER

Exposure Controls

Respiratory Protection:WHEN SPRAYING THIS MATERIAL US NIOSH APPROVED
CARTRIDGE RESPIRATOR OR GAS MASK. WHEN USING IN POORLY VENTILATED
OR CONFINED SPACES, USE A FRESH-AIR SUPPLYING RESPIRATOR OR A
SELF-CONTAINED BREATHING APPARATUS.
Ventilation:GENERAL MECHANICAL VENTILATION OR LOCAL EXHAUST SHOULD BE
SUITABLE. VENTILATION EQUIPMENT MUST BE EXPLOSION PROOF.
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:CHEMICAL SAFETY GLASSES/GOGGLES
Other Protective Equipment:WEAR IMPERMEABLE APRONS AND PROTECTIVE
CLOTHING WHENEVER POSSIBLE. HEAD CAPS ARE STRONGLY RECOMMENDED
WHEN POSSIBLE.
Work Hygienic Practices:AFTER USING, WASH BEFORE EATING, TOILETING OR
SMOKING.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:306F
Vapor Density:> AIR
Spec Gravity:2.8
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:PIGMENTED LIQUID. SMELLS OF VEGETABLE OIL, SOLVENT.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HEAT OR IGNITION SOURCES.
Hazardous Decomposition Products:THERMAL DECOMPOSTION MAY YIELD CARBON
DIOXIDE AND/OR MONOXIDLOW MOLECULAR WEIGHT HYDROCARBONS AND ORGANIC
ACIDS.

Disposal

Waste Disposal Methods:AVOID SPONTANEOUS COMBUSTION OF INERT ABSORBANT
BYIMMEDIATE IMMERSION IN WATER. KEEP OUT OF DRAINS, SEWERS AND
WATERWAYS. DISPOSE IN ACCORDANCE WITH STATE, LOCAL AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.