BHDCB - BLACK PHENOLIC COATING C37038
- MSDS: BHDCB
- Manufacturer: EVERSEAL MANUFACTURING CO INC
- Product Name: BLACK PHENOLIC COATING C37038
- National Stock Number: 8010-00-200-3495
Product Identification
Product ID:BLACK PHENOLIC COATING C37038
MSDS Date:06/10/1986
FSC:8010
NIIN:00-200-3495
MSDS Number: BHDCB
Responsible Party
RIDGEFIELD, NJ 07657
US
Emergency Phone: 201-943-4986
Cage: EO432
Contractor
Telephone: 201-943-4986
Cage: 72988
Ingredients
RESIN
Fraction By Weight: 20%
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 3 - 5%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
MINERAL SPIRITS
CAS: 64741-65-7
Fraction By Weight: 38%
OSHA PEL 120 PPM
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 37%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Effects of Overexposure:SKIN: DRYING EYES: IRRITATION
INHALATION: MAY CAUSE ANESTHESIA,
HEADACHE, DIZZINESS, NAUSEA, UPPER RESPIRATORYIRRITATION.
First Aid
First Aid:SKIN: WASH WITH MILD SOAP AND WATER. APPLY A MILD CREAM. IF
SEVERE CONTACT A PHYSICIAN.
INHALATION: REMOVE TO FRESH AIR.
APPLY A RTIFICAL RESPIRATION IF NECESSARY. CALLA PHYSICIAN.
Fire Fighting
Flash Point:105F/40.56C
Lower Limits:0.7
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING MEDIUM
Accidental Release
Spill Release Procedures:FLUSH WITH WATER INTO RETAINING AREA OR
CONTAINER.AVOID SPARKS,FIRE OR HOT METAL SURFACES. SMALL
QUANTITIES MAY BE ABSORBED ONTO AN APPROPRIATE ABSORBANT.
Handling
Handling and Storage Precautions:KEEP COOL, AWAY FROM SOURCE OF
IGNITION, ADEQUATE VENTILATION. AVOID PROLONGED/REPEATED PERSONAL
CONTACT.
Other Precautions:NPCA/HMIS RATING 3,2,0,H
Exposure Controls
Respiratory Protection:CARTRIDGE RESPRIATOR OR MASK
Ventilation:LOCAL EXHAUST IF SUFFICIENT TO KEEP WORKING ROOM CONCENTRA-
TION BELOW TLV
Protective Gloves:IMPERMEABLE
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:APRON, BARRIER CREAM
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:326-387F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:58
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, FIRE
Hazardous Decomposition Products:CARBON MONOXIDE/DIOXIDE
Disposal
Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
IN ACCORDANCE WITH FEDERAL, STATE, & LOCAL REGULATION
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.