BHDHD - DOD-E-700A, DECK ENAMEL (F20L)

  • MSDS: BHDHD
  • Manufacturer: DAVLIN COATINGS INC
  • Product Name: DOD-E-700A, DECK ENAMEL (F20L)
  • National Stock Number: 8010-00-285-4870
Product Identification

Product ID:DOD-E-700A, DECK ENAMEL (F20L)
MSDS Date:08/15/1986
FSC:8010
NIIN:00-285-4870
MSDS Number: BHDHD

Responsible Party
DAVLIN COATINGS, INC.
1401 E 14TH
BERKELEY, CA 94702
US

Emergency Phone: 415-889-7098

Info Phone: 415-848-2863

Cage: LO163

Contractor
DAVLIN PAINT CO
OAKLAND, CA 94606-4401 US

Telephone: 415-848-2863

Cage: 91007

Ingredients

VM&P NAPHTHA (LIGROINE)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 30%

OSHA PEL 300 PPM/400 STEL

ACGIH TLV: 300 PPM; 9192


TRIETHYLAMINE (SARA III)

CAS: 121-44-8

RTECS: YE0175000

Fraction By Weight: <0.5%

OSHA PEL 25 PPM/15 STEL

ACGIH TLV: 10 PPM/15 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHYL ALCOHOL (METHANOL) (SARA III)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: <0.5%

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <0.5%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


LEAD NAPHTHENATE

CAS: 61790-14-5

RTECS: 999999922

Fraction By Weight: 0.33%


COBALT SALT OF ORGANIC ACIDS

Fraction By Weight: <0.5%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:SKIN: DRY & DEFAT SKIN CAUSING CRACKS,
IRRITATION & DERMITITIS. EYE: SEVERE IRRITATION,
TEARING, REDNESS & BLURRED VISION. INGEST:
GASTROINTESTINAL IRRITATION, VOM ITING, NAUSEA, & DIARRHEA.INHAL:
DIZZINESS, BREATHING DIFFICULTY, HDACHES, & LOSS OF COORDINATION.
Medical Cond Aggravated by Exposure:RESPIRATORY TRACT IRRITATION,
DERMITITIS, NAUSEA

First Aid

First Aid:SKIN: WASH THOROUGHLY W/SOAP & WATER. CONTACT A PHYSICIAN.
EYE: FLUSH WITH LARGE QUANTITIES OF WATER FOR 15
MINUTES. INGEST: DONOT INDUCE VOMITING, CAN
CAUSE CHEMICAL PNEUMONITIS & PULMONARY EDEMA.CONTACT A PHYSICIAN
IMMEDIATELY.
INHAL:MOVE PERSON TO FRESH AIR. IF NOT BREATHING GIVE ARTIFICIAL
RESPIRATION.

Fire Fighting

Flash Point Method:TCC
Flash Point:104F/40.00C
Lower Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WATER SHOULD NOT BE USED EXCEPT AS FOG TO KEEP
CLOSED CONTAINER COOL. RESPIRATORY EQUIP. SHOULD BE WORN
TO AVOID INHALATION OF CONCENTRATED VAPORS.
Unusual Fire/Explosion Hazard:VAPORS FORM AN EXPLOSIVE MIXTURE W/AIR
BETWEEN LOWER/UPPER EXPLOSIVE LIMITS WHICH CAN BE IGNITED BY
MANY SOURCES.CLSD CONTAINERS MAY EXPLODE W/EXPSD TO HEAT

Accidental Release

Spill Release Procedures:ELIMINATE IGNITION SOURCES, PROVIDE GOOD
VENTILATION, DIKE SPILL AREA AND ADD ABSORBANT TO SPILLED
LIQUID.

Handling

Handling and Storage Precautions:DONOT STORE ABOVE 120F. STORE LR
QUANTITIES IN BUILDINGS DESIGNED FOR STOREAGE OF NFPA CLASS II
COMBUSTIBLE LIQUIDS.
Other Precautions:SMOKING IN AREAS WHERE THIS MATERIAL IS USED SHOULD
BE PROHIBITED. DO NOT TAKE INTERNALLY. CONTAINERS SHOULD BE
GROUNDED WHEN POURING: AVOID FREE FALL OF LIQ. IN EXCESS OF FEW
INCHES. KEEP CONTAINERS CLOSED WHEN NOT IN USE.

Exposure Controls

Respiratory Protection:USE A NIOSH APPROVED CARTRIDGE RESPIRATOR OR GAS
MASK SUITABLE TO KEEP AIRBORNE MISTS & VAPOR CONCENT. BELOW TLV.
WHEN USING IN POOR VENTILATED & CONFINED AREASUSE A FRESH AIR
SUPPLY RESPIRATOR OR A S ELF CONTAINED BREATHING APPARATUS.
Ventilation:GENERAL OR LOCAL EXHAUST SHOULD BE SUITABLE
Protective Gloves:REQUIRED FOR PROLONGED/REPEATED CONTACT
Eye Protection:CHEM/SAFETY GLASSES/GOGGLES W/FACESHIELD
Other Protective Equipment:IMPERMEABLE APRON & PROTECTIVE CLOTHING TO
PREVENT SKIN CONTACT. USE OF HEAD CAPS IS STRONG RECOMMENDED.
Work Hygienic Practices:WASH BEFORE EATING, TOILETING, OR SMOKING
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:300-390F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:50.55

Stability

Stability Indicator/Materials to Avoid:YES
NA
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERE.
Hazardous Decomposition Products:CARBON MONOXIDE/DIOXIDE, OXIDES OF
NITROGEN, POSSIBLY CHLOR-INE.

Disposal

Waste Disposal Methods:COLLECT ABSORBANT/SPILLED LIQ MIXTURE INTO METAL
CONATINERS. DISPOSE IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.