BHDHM - ENAMEL ALKYD GLOSS BLACK 17038

  • MSDS: BHDHM
  • Manufacturer: CHEMRAY COATINGS CORP
  • Product Name: ENAMEL ALKYD GLOSS BLACK 17038
  • National Stock Number: 8010-00-286-7725
Product Identification

Product ID:ENAMEL ALKYD GLOSS BLACK 17038
MSDS Date:01/01/1987
FSC:8010
NIIN:00-286-7725
MSDS Number: BHDHM

Responsible Party
CHEMRAY COATINGS, CORP.
209 N. MICHIGAN AVE.
KENILWORTH, NJ 07033
US

Emergency Phone: 201-245-1111

Info Phone: 201-245-1111

Cage: OBRN9

Contractor
CHEMRAY COATINGS CORP.
NA KENILWORTH, NJ 07033 US

Telephone: 800-924-9300

Cage: OBRN9

Ingredients

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 2.8%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


ALKYD RESIN

Fraction By Weight: 41.7%


SOLVENTS RULE 66 MINERAL SPIRITS

CAS: 64742-88-7

Fraction By Weight: 55.5%

ACGIH TLV: 120 PPM


LEAD DRIER (AS PB)

Fraction By Weight: .2%

ACGIH TLV: .05 MG/M3


COBALT DRIER (AS CO)

CAS: 7440-78-4

Fraction By Weight: 0.03%

ACGIH TLV: 0.1 MG/M3


4.17 LBS/GALS OR 500 GRAMS/LITERS

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Effects of Overexposure:INHALATION: MAY CAUSE HEADACHE, DIZZINESS,
COMA, OR UNCONSCIOUSNESS. SKIN/EYE: PRIMARY IRRITATION,
DRYING OF SKIN

First Aid

First Aid:EYE: FLUSH W/RUNNING WTR FOR 15 MINUTES. TAKE TO PHYSICIAN.
SKIN: REMOVE CONTAMINATED CLOTHING. WASH AFFECTED
AREA W/SOAP & WATER. CONSULT APHYSICIAN.INHALATION: REMOVE FROM
EXPOSU RE. RESTORE BREATHING, KEEP WARM. NOTIFY PHYSICIAN

Fire Fighting

Flash Point Method:PMCC
Flash Point:100F/38C
Lower Limits:6
Upper Limits:1
Extinguishing Media:CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER FOG MAY BE USED TO COOL CLSD CONTAINERS
TO PREVENT PRESSURE BUILD UP AND AUTO IGNITION W/EXPSD TO EXTRM
HEAT. WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY TO HOT SURFACES.

Accidental Release

Spill Release Procedures:REMOVE W/ABSORBENT MATERIAL OR FLUSH W/WATER
INTO RETAINING AREA OR CONTAINER. AVOID SPARKS, FIRE AND HOT
SURFACES. VENTILATE AREA.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, OR OPEN
FLAME. USE W/ADEQUATE VENTILATION. AVOID PROLONGED OR REPEATED
CONTACT WITH SKIN.
Other Precautions:DO NOT TAKE INTERNALLY

Exposure Controls

Respiratory Protection:WHEN SPRAYING USE HSC MODEL 1482 RESPIRATOR, OR
NIOSH/MESA APPROVED.
Ventilation:LOCAL EXHAUST IF SUFFICIENT TO KEEP LEL BELOW STATED LIMIT.
AIR LINE TYPE RESPIRATOR OR HOOD CONFINED AREA SPRAY.
Protective Gloves:REQUIRED
Eye Protection:GOGGLES
Other Protective Equipment:IMPERMEABLE APRON
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:**SEE BELOW
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:.9076
Evaporation Rate & Reference:.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VLACK LIQUID, NOT OBNOXIOUS
Percent Volatiles by Volume:65

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS OR BASES.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME AND FIRE
Hazardous Decomposition Products:CARBON MONOXIDE/DIOXIDE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS. INCINERATE IN APPROVED FACILITY

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.