BHDMP - BLACK GLOSS ALKYD ENAMEL 17038
- MSDS: BHDMP
- Manufacturer: EVERSEAL MANUFACTURING CO INC
- Product Name: BLACK GLOSS ALKYD ENAMEL 17038
- National Stock Number: 8010-00-527-2050
Product Identification
Product ID:BLACK GLOSS ALKYD ENAMEL 17038
MSDS Date:05/26/1987
FSC:8010
NIIN:00-527-2050
MSDS Number: BHDMP
Responsible Party
RIDGEFIELD, NJ 07657
US
Emergency Phone: 201-943-4986
Cage: EO432
Contractor
Telephone: 201-943-4986
Cage: 72988
Ingredients
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 3 - 5%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
MINERAL SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 55%
ACGIH TLV: 120 PPM
RESIN
Fraction By Weight: 41%
OSHA PEL NA
ACGIH TLV: NA
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA, POSSIBLE
UNCONSCIOUSNESS SKIN/EYE: IRRITATION
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR, APPLY ARTIFICIAL RESPIRATION
IF NECESSARY. EYE: FLUSH WITH WATER
SKIN: WASH WITH SOAP AND WATER.
CONSULT A PHYSICIAN.
Fire Fighting
Flash Point:105F/40.56C
Lower Limits:1
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING
MEDIUM. FIREFIGHTERS SHOULD WEAR A SELF CONT-AINED BREATHING
APPARATUS.
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES, ENSURE ADEQUATE
VENTILA- TION. ABSORB SMALL SPILLS ON DRY ABSORPTION MATL. USE
SPARK PROOF SCOOP FOR LARGER SPILLS.
Handling
Handling and Storage Precautions:AVOID EXCESSIVE HEAT AND OPEN IGNITION
SOURCES.
Other Precautions:NPCA/HMIS RATING 3,2,0,H
Exposure Controls
Respiratory Protection:IF TLV MAY BE EXCEEDED. USE CARTRIDGE MASK
Ventilation:SUFFICIENT TO ENSURE LEL NOT ACHIEVED
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM.
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:323-390F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:65
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NA
Hazardous Decomposition Products:CARBON MONOXIDE/DIOXIDE
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL AND LOCAL
REGULATIONS FOR HAZARDOUS WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.