BHDSG - ALUMINUM COATING ID F8047

  • MSDS: BHDSG
  • Manufacturer: DEL PAINT MFG
  • Product Name: ALUMINUM COATING ID F8047
  • National Stock Number: 8010-00-664-5678
Product Identification

Product ID:ALUMINUM COATING ID F8047
MSDS Date:07/14/1989
FSC:8010
NIIN:00-664-5678
MSDS Number: BHDSG

Responsible Party
DEL PAINT MFG.
3105 E. RENO
OKLAHOMA CITY, OK
US

Emergency Phone: CHEMTREC 1-800-424-9300

Info Phone: 405-672-1431

Cage: DELPA

Contractor
DEL PAINT MFG.
OKLAHOMA CITY, OK US

Telephone: 405-672-1431

Cage: DELPA

Ingredients

PETROLEUM DISTILLATES (NAPHTHA OR RUBBER SOLVENT)

CAS: 8002-05-9

RTECS: SE7449000

Fraction By Weight: 2.77%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 8990

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:VAPORS ARE INTOXICATING AND NARCOTIC. THEY ALSO
CAUSE IRRITATION TO THE MUCOUS MEMBRANES OF THE LUNG. SKIN CONTACT
PRODUCES REDNESS. EYE CONTACT PRODUCES RED- NESS AND PAIN.
INHALATION GIVES LABORED BREATHING, DULLNESS AND
DROWSINESS.INGESTION CAN CAUSE ABDOMINAL PAIN AND NAUSEA.
Medical Cond Aggravated by Exposure:DISEASES OF THE RESPIRATORY SYSTEM.

First Aid

First Aid:SKIN: REMOVE CONTAMINATED CLOTHING. SHOWER OR RINSE SKIN WITH
PLENTY OF WATER. EYE: RINSE WITH COPIOUS AMOUNTS OF WATER.
TRANSPORT TO PHYSICIAN IF NECESSARY. INHALATION: REMOVE TO FRESH
AIR. GIVE CP R IF NECESSARY AND CONTACT PHYSICIAN.INGESTION: RINSE
MOUTH AND DRINK PLENTY OF WATER. DO NOT INDUCE VOMITING. SEEK
MEDICAL ASSISTANCE.

Fire Fighting

Flash Point Method:TCC
Flash Point:80F 26.67C
Upper Limits:1.1
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS WITH A FULL
FACEPIECE OPERATED IN PRESSURE- DEMAND OR OTHER POSITIVE MODE.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR & MAY TRAVEL
ALONG GROUND OR MOVED BY VENTILATION & IGNITED BY HEAT & IGNITION
SOURCES.

Accidental Release

Spill Release Procedures:ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR
ABSORBENT, OR OTHER ABSORBENT MATERIAL & TRANSFER TO HOOD.

Handling

Handling and Storage Precautions:STORE IN A CLEAN DRY AREA. KEEP AWAY
FROM FOOD PRODUCTS. KEEP AWAY FROM SPARKS FIRES AND REMOTE
IGNITION SOURCES.

Exposure Controls

Respiratory Protection:AIR SUPPLIED RESPIRATOR IS ADVISED. ENGINEERING
OR ADMINISTRATIVE CONTROLS SHOULD BE IMPLEMENTED TO REDUCE
EXPOSURE.
Ventilation:PROVIDE VENTILATION SUFFICIENT TO MAINTAIN EXPOSURE BELOW
TLV'S.
Protective Gloves:WEAR RESISTANT GLOVES SUCH AS; BUNA N
Eye Protection:SPLASH GOGGLES OR SAFETY GLASSES.
Other Protective Equipment:TO PREVENT REPEATED OR PROLONGED SKIN
CONTACT, WEAR IMPER- VIOUS CLOTHING AND BOOTS.
Work Hygienic Practices:WASH HANDS AND FACE BEFORE EATING.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:279 - 300F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:87.95

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT STORE NEAR HEATED SURFACES, OPEN
FLAMES, OR IGNITION SOURCES.
Hazardous Decomposition Products:CARBON DIOXIDE AND WATER ARE FORMED ON
COMBUSTION.

Disposal

Waste Disposal Methods:DISPOSAL OF WASTE MATERIAL MUST COMPLY WITH
STATE,FEDERAL, AND LOCAL REGULATIONS. IF APPROVED, IT MAY BE
REMOVED TO A LICENSED LAND FILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.