Product ID:HEAT RESISTANT ALUMINUM
MSDS Date:04/14/1987
FSC:8010
NIIN:00-664-7468
MSDS Number: BHDSP

EVERSEAL MANUFACTURING CO., INC.

475 BROAD AVENUE
RIDGEFIELD, NJ 07657
US

Emergency Phone: 201-943-4986

Cage: EO432

EVERSEAL MFG CO INC

RIDGEFIELD, NJ 07657-2329 US

Telephone: 201-943-4986

Cage: 72988

RESIN

Fraction By Weight: 17%

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 23%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

MINERAL SPIRITS

CAS: 64742-88-7

Fraction By Weight: 25%

OSHA PEL 120 PPM

ACGIH TLV: 5 G/KG (ORAL)

ALIPHATIC NAPHTHA

CAS: 64742-89-8

Fraction By Weight: 31%

OSHA PEL 150 PPM

ACGIH TLV: 5 G/KG (ORAL)

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA, POSSIBLE
UNCONSCIOUSNESS. MILDLY IRRITATING TO THE SKIN. IRRITATING TO
EYES.

First Aid:INHALATION: REMOVE TO FRESH AIR, APPLY CPR IF NECESSARY.
SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER. CONSULT
PHYSICIAN.

Flash Point:50F
Upper Limits:0.7
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING
MEDIUM. FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS.

Spill Release Procedures:ENSURE ADEQUATE VENTILATION, REMOVE IGNITION
SOURCES. ABSORB SMALL SPILLS ON DRY ABSORPTION MATERIAL. USE
SPARK-PROOF SCOOP FOR LARGER SPILLS.

Handling and Storage Precautions:KEEP AWAY FROM MOISTURE. AVOID
EXCESSIVE HEAT. KEEP AWAY FROM IGNITION SOURCES.

Respiratory Protection:IF TLV EXCEEDED USE CARTRIDGE VAPOR MASK.
Ventilation:LOCAL EXHAUST SUFFICIENT TO ENSURE LEL NOT ACHIEVED.
Protective Gloves:IMPERVIOUS MATERIAL
Eye Protection:GOGGLES
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM.
Supplemental Safety and Health
NK

Boiling Pt:B.P. Text:245 - 390F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:74

Stability Indicator/Materials to Avoid:YES
ACIDS OR ALKALIES CAUSE VIOLENT REACTION. AVOID STRONG OXIDIZING
MATERIALS
Stability Condition to Avoid:MOISTURE CAUSES HYDROGEN GAS BUILD-UP. GAS
BUILD-UP IS INDI-CATED BY BULGING CAN/LID. CONSULT MANUFACTURER IF
THIS OCCUR
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE ON
COMBUSTION.

Waste Disposal Methods:AS PER LOCAL AND FEDERAL REGULATION FOR
HAZARDOUS MATERIAL

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.