BHDSR - ENAMEL, ALKYD, GLOSS, WHITE 17875, 742762

  • MSDS: BHDSR
  • Manufacturer: PRATT AND LAMBERT INC
  • Product Name: ENAMEL, ALKYD, GLOSS, WHITE 17875, 742762
  • National Stock Number: 8010-00-664-7653
Product Identification

Product ID:ENAMEL, ALKYD, GLOSS, WHITE 17875, 742762
MSDS Date:05/03/1985
FSC:8010
NIIN:00-664-7653
MSDS Number: BHDSR

Responsible Party
PRATT & LAMBERT, INC.
630 EAST 13TH
ANDOVER, KS 67002
US

Emergency Phone: 316-733-1361

Info Phone: 316-733-1361

Cage: FO127

Contractor
PRATT AND LAMBERT INC
22 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: < 5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


NAPHTA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 10%

OSHA PEL 100 PPM


ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 5%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


ISOBUTYL ACETATE

CAS: 110-19-0

RTECS: AI2025000

Fraction By Weight: 10%

OSHA PEL 150 PPM 700 MG/CU.M

ACGIH TLV: 150 PPM 700 MG/CU.M.

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 5%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


FORMALDEHYDE (SARA III)

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: < 1%

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM; A2; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: < 5%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ALIPHATIC HYDROCARBONS

CAS: 64742-89-8

Fraction By Weight: < 5%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SWALLOWING GASTROINTESTINAL IRRI,
NAUSEA, VOMITING. ASPIRTION OF MATERIAL INTO LUNG CAUSE CHEMICAL
PNEUMONITITS CAN BE FATAL. INHALATION PERMISSIBLE CEILING/PEAK
EXPOSURE LIMITS FOR TOLUENE ARE 300 P PM & 500 PPM RESP. IRRI OF
RESPIRATORY SYSTEM, PULMONARY EDEMA MAY BE DELAY EYE: IRRI. SKIN:
LIQ MAY ABSORB DEFAT IRRI
Explanation of Carcinogenicity:TITANIUM DIOXIDE IS NOT LISTED BY NTP,
IARC, OSHA, OR ACGIH.DRY TITANIUM DIOXIDE W/RATS BENIGN/MALIG LUNG
TUMOR
Effects of Overexposure:XYLENE MAY CAUSE INJURY TO LIVER, KIDNEY,
BLOOD. PROLONGED/REPEATED EXPOSURE TO SOLVENTS PEMANENT
BRAIN/NERVOUS SYSTEM DAMAGE. MAY BE HARMFUL OR FATAL. TOLUENE HAS
BEEN FOUND TO CAUSE KIDNEY, LUNG, SP LEEN DAMAGE IN LAB ANIMALS.
FORMALDEHYDEPOTENTIAL CARCINOGEN. TO HUMANS, IRRI TO EYES, NOSE &
THROAT.

First Aid

First Aid:SWALLOW: INDUCE VOMIT. CALL POISON CONTROL CENTER, HOSPITAL,
PHYSICIAN IMMD. INHALATION: REMOVE TO FRESH AIR IMMD. BREATHING HAS
STOPPED GIVE CPR. KEEP WARM & QUIET. GET MED ATTN. IMMD. EYE: FLUSH
W/L ARGE AMT OF WTR, LIFTING LIDS OCCASIONALLY, 15 MIN. GET MED.
ATTN. AND SKIN: REMOVE CONTAMINATED CLOTHING. WASH AFFECTEDAREA
W/SOAP & WTR. SEEK MED. ATTN. IRRI PERSISTS. PHYSICIAN TREAT DIRECT
SYMPTOM

Fire Fighting

Flash Point Method:TCC
Flash Point:44 F 6.67 C
Extinguishing Media:NFPA CL B EXTINGUISHERS, CARBON DIOXIDE, ALL
PURPOSE DRY CHEMICAL/ALCOHOL FOAM, FOR FLAM LIQUID. POLYMER FOAM
PREFERRED
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. WTR
MAY BE INEFFECTIVE, MAY COOL EXPOSED CONTAINERS TO PREVENT PRESSURE
BUILD-UP/AUTO-IGNITION/EXPLOSION. FOG NOZZLE
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMPOSTION PRODUCT MAY
CAUSE A HEALTH HAZARD. SYMPTOMS MAY NOTBE IMMEDIATELY APPARENT.
SEEK MED. ATTN. WARNING! FLAMMABLE.

Accidental Release

Spill Release Procedures:KEEP SPECTATORS AWAY. ELIMINATE ALL IGNITION
SOURCES. DIKE/CONTAIN W/INERT MATERIAL, SAND, EARTH. TRANS LIQ TO
COVERED METAL CONTAN. USE ONLY NON-SPARKING TOOLS. ABSORBENT DIKING
MATER IN COVERE METAL CONTAIN PREVENT CONTAM OF
SEWER,STREAM,GOUNDWATER

Handling

Handling and Storage Precautions:DO NOT STORE >95 F. STORE LARGE
QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106. DO NOT TAKE
INTERNALY. CLOSE CONTAINER AFTER EACH USE
Other Precautions:EMPTY CONTAINERS MUST NOT BE WASHED AND RE-USED FOR
ANY PURPOSE, CONTAINERS SHOULD BE GROUNDED & BONDED TO THE
RECEIVING CONTAINER. DO NO WELD, BRAZE OR CUT ON EMPTY CONTAINER.

Exposure Controls

Respiratory Protection:DEPENDS UPON MAY FACTORS. GENERAL: ORGANIC
CHEMICALS SUCH AS THOSE CONTAINED IN MAY NOT REQUIRE RESPIRATORY
PROTECTION IF WELL VENT AREA. RESTRICTED: NIOSH APPROVED CHEMICAL
CARTRIDGE RESPIRATOR MAY B E REQUIRED/MSHA APPROVED AIR SUP-RESPIRA
Ventilation:GENERAL DILUTION/LOCAL EXHAUST VENT IS SUFF VOL/PATTERN TO
MAINTAIN CONCENTRATION OF HAZARD LOWEST EXPOSURE LIMIT STATED
Protective Gloves:SOLVENT IMPERMEABLE FOR PROLONGED USE
Eye Protection:WEAR SAFETY SPECTACLES
Other Protective Equipment:NOT LIKELY TO BE NEEDED
Work Hygienic Practices:GOOD GENERAL HYGIENE PRACTICES
Supplemental Safety and Health
DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. EMPTY
CONTAINERS MUST NOT BE WASHED AND RE-USED FOR ANY PURPOSE.
CONTAINERS SHOULD BE GROUNDED AND BONDED TO THE RECEIVING
CONTAINER. DO NOT WEL D, BRAZE OR CUT ON EMPTY CONTAINER

Chemical Properties

Boiling Pt:B.P. Text:223-290 F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:57

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS
Stability Condition to Avoid:NORMALLY STABLE
Hazardous Decomposition Products:BURNING, INCLUDING WHEN HEATED BY
WELD/CUTTING, WILL PRODUCESMOKE, CARBON MONOXIDE & CARBON DIOXIDE.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT SPARKS AND FLAME

Disposal

Waste Disposal Methods:ACCORDANCW W/FED, STATE & LOCAL LAWS. INCINERATE
ONLY IN EPA PERMIT FACILITY. O NOT INCIN CLOSE CONTAIN. USE
PRECAUSTIONS OF FLAMMABLE MATER. CONTAM ABSORBENT MAY BE DISPOSED
IN IN A HAAROUS WASTE LANFILL. IGNITABLE CHARACTERISTIC

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.