Product ID:PAINT READY MIXED
MSDS Date:01/01/1987
FSC:8010
NIIN:00-664-9077
MSDS Number: BHDST

Emergency Phone: 202-526-3100

Info Phone: 202-526-3100

Cage: SHIPS

Telephone: 202-526-3100

Cage: SHIPS

SOLVENTS

Fraction By Weight: 45.297%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:INHALATION OF HIGH CONCENTRATIONS MAY HAVE
RESULTS FROM MILD DEPRESSION TO CONVULSIONS OR LOSS OF
CONSCIOUSNESSS

First Aid:IF OVERCOMED BY VAPOR, REMOVE FROM EXPOSRUE IMMEDIATELY AND
CALL A PHYSICIAN. IFBREATHING IS IRREGULAR OR STOPPED, START
RESUSCITATION IMMEDIATELY AND ADMINISTER OXYGEN. REMOVE
CONTAMINATED CLOTHING A ND WASH SKIN. FLUSH EYES WITH COLD WATER

Flash Point Method:TCC
Flash Point:113 F 45 C
Lower Limits:6.5
Upper Limits:1.0
Extinguishing Media:FOAM, DRY CHEMICAL, CO2, WATER SPRAY OR FOG
Fire Fighting Procedures:USE AIR SUPPLIED EQUIPMENT FOR RESCUE IN
ENCLOSED AREAS
Unusual Fire/Explosion Hazard:HYDROCARBONS - FORM EXPOSIVE MIXTURE WITH
AIR

Spill Release Procedures:AVOID OPEN FLAMES: SPARKS SOURCES: PROVIDE
ADEQUATE VENTILATION

Handling and Storage Precautions:AVOID OPEN FLAMES, SPARK SOURCES AND
HIGH TEMPERATURE AREAS

Respiratory Protection:HYDROCARBON VAPOR CANISTER; AIR SUPPLIES OR HOSE
MASK
Ventilation:LOCAL; FACE VELOCITY > 60 FPM. MECHANICAL; EXPLOSION-PROOF
VENTILATION EQUIPMENT
Protective Gloves:HYDROCARBON-INSOLUBLE RUBBER/PLASTIC
Eye Protection:CHEM GOGGLES/ FACE SPLASH SHIELD
Other Protective Equipment:HYDROCARBON-INSOLUBLE APRON
Supplemental Safety and Health
NK

HCC:F4
Boiling Pt:B.P. Text:318-345 F
Vapor Pres:< 1MM
Vapor Density:4.3
Spec Gravity:0.8762
Evaporation Rate & Reference:0.08
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WATER CLEAR COLOR - AROMATIC HYDROCARBON ODOR
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
OXYGEN & OXIDANTS: WILL DISSOLVE SOME PLASTICS AND RUBBER
Stability Condition to Avoid:MAY IGNITE AT TEMPERATURES ABOVE 700 F
Hazardous Decomposition Products:INCOMPLETE COMBUSTION PRODUCES CARBON
MONOXIDE

Waste Disposal Methods:CLEAN AREA WITH RAGS IMMED: REMOVE PAINT STAINS
WITH AROMATIC SOLVENT: STORE SOILED RAGS IN CLOSED METAL CONTAINER
TO PREVENT INTAKE OF OXYGEN RESULTING IN POSSIBLE SPONTANEOUS
COMBUSTION

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.