BHDWN - PAINT, ALUMINUM, HEAT RESISTING

  • MSDS: BHDWN
  • Manufacturer: CHEMRAY COATINGS CORP
  • Product Name: PAINT, ALUMINUM, HEAT RESISTING
  • National Stock Number: 8010-00-815-2692
Product Identification

Product ID:PAINT, ALUMINUM, HEAT RESISTING
MSDS Date:01/01/1987
FSC:8010
NIIN:00-815-2692
MSDS Number: BHDWN

Responsible Party
CHEMRAY COATINGS, CORP.
209 N. MICHIGAN AVE.
KENILWORTH, NJ 07033
US

Emergency Phone: 201-245-1111

Info Phone: 201-245-1111

Cage: OBRN9

Contractor
CHEMRAY COATINGS CORP.
NA KENILWORTH, NJ 07033 US

Telephone: 800-924-9300

Cage: OBRN9

Ingredients

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 25-27%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192


ALKYD RESIN

Fraction By Weight: 73-77%


MINERAL RULE 66 SPIRITS

CAS: 64742-88-7

Fraction By Weight: 58-59%

ACGIH TLV: 200 PPM

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:EXCESSIVE INHALATION MAY CAUSE HEADACHE,
DIZZINESS, UNCONSCIOUSNESS OR COMA. SKIN OR EYE CONTACT: PRIMARY
IRRITATION, DRYING OF SKIN

First Aid

First Aid:FUMES: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP WARM.
NOTIFY PHYSICIAN. EYE: FLUSH WITH RUNNING WATER AT LEAST 15 MIN.
TAKE TO PHYSICIAN. REMOVE CONTAMINATED CLOTHING. CONSULT PHYSICIAN.
SKIN: WASH AFFECTED AREA WITH SOAP AND WATER

Fire Fighting

Flash Point Method:PMCC
Flash Point:105 F/40.56 C
Lower Limits:0.9
Upper Limits:6.0
Extinguishing Media:C02, FOAM-DRY. CHEMICAL WATER FOG
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:REMOVE WITH ABSORBENT MATERIAL OR FLUSH WITH
WATERINTO RETAINING AREA OR CONTAINER. AVOID SPARKS, FIRE & HOT
SURFACES. VENTILATE AREA

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS OR OPEN
FLAME. USE WITH ADEQUATE VENTILATION. AVOID PROLONGED OR REPEATED
CONTACT WITH SKIN
Other Precautions:DO NOT TAKE INTERNALLY.

Exposure Controls

Respiratory Protection:WHEN SPRAYING USE HSC MODEL 1482 RESPIRATOR BY
H.S. COVER CO., BUCHANAN, MI. OR NIOSH & MESA APPROVED.
Ventilation:LOCAL EXHAUST TO KEEP LEL & LOWEST TLV BELOW STATED LIMIT
MECH: FANS W/EXPLOSIVE PROOF MOTORS. AIR LINE TYPE/HOOD
Protective Gloves:REQUIRED FOR PROLONGED OR REPEATED USE
Eye Protection:GOGGLES TO PRETECT AGAINST SPRAY/SPLASH
Other Protective Equipment:IMPERMEABLE APRON FOR PROLONGED OR REPEATED
CONTACT
Supplemental Safety and Health
EMERGENCY ACCIDENT PRECAUTIONS: TURN IGNITION OFF. KEEP PEOPLE AWAY.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:246 F
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:1.026
Evaporation Rate & Reference:1.2
Solubility in Water:NA
Appearance and Odor:ALUMINUM, NOT OBNOXIOUS
Percent Volatiles by Volume:60

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS OR BASES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME AND FIRE
Hazardous Decomposition Products:THEREMAL DECOMP. MAY YIELD CARBON
MONOXIDE AND/OR CARBON DIOXIDE

Disposal

Waste Disposal Methods:INCINERATE IN APPROVED FACILITY/DISPOSE OF IN
ACC-ORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.