BHDWR - ACRYLIC LATEX PAINT EXTERIOR WHITE 37875

  • MSDS: BHDWR
  • Manufacturer: ASAHIPEN AMERICAN INC
  • Product Name: ACRYLIC LATEX PAINT EXTERIOR WHITE 37875
  • National Stock Number: 8010-00-823-7962
Product Identification

Product ID:ACRYLIC LATEX PAINT EXTERIOR WHITE 37875
MSDS Date:02/01/1989
FSC:8010
NIIN:00-823-7962
MSDS Number: BHDWR

Responsible Party
ASAHIPEN AMERICAN INC.
1126 SW SPOKANE STREET
SEATTLE, WA 98134-1197
US

Emergency Phone: 303-573-1014 POISON CENTER

Info Phone: 206-682-4603

Preparer: DOUGLAS KIER

Cage: DO047

Contractor
ASAHIPEN AMERICA INC.
SEATTLE, WA 98134-1197

Telephone: 303-573-1014 POISON CENTER

Cage: DO047

Ingredients

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <5%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:ADVERSE HEALTH EFFECTS FROM VAPORS OR SPRAY
MISTS IN POORLY VENTILATED AREAS MAYINCLUDE IRRITATION OF THE
MUCOUS MEMBRANES OF THE NOSE,THROAT & RESPIRATORY TRACT & SYMPTOMS
OF HEADACHE & NAUSEA.PROLON GED OR REPEATED EXPOSURE TO PRODUCT
MAYCAUSE SKIN ITTITATION.DIRECT CONTACT W/PRODUCT MAY RESULT IN EYE
IRRITATION.

First Aid

First Aid:INHALATION:REMOVE TO FRESH AIR.EYE & SKIN:PROMPTLY &
THROUGHLY WASH EYES W/WTR FOR AT LEAST 15 MINS & CONSULT A DOCTOR
IF IRRITATION PERSISTS.REMOVE CONTAMINATED CLOTHING BEFORE
REUSE.INGESTION:IF VIC TIM IS CONSCIOUS,GIVE TWO GLASSES OF WATER
TO DRINK & CALL A PHYSICIAN.DO NOT GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON.

Fire Fighting

Flash Point:NONE
Upper Limits:NA
Extinguishing Media:THE PAINT WILL NOT BURN UNTIL WTR HAS
EVAPORATED.FOR RESIDUAL SOLIDS USE:FOAM,ALCOHOL FOAM,CO2,DRY
CHEMICAL OR WTR FOG.
Fire Fighting Procedures:CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT.WTR MAY BE USED TO COOL UNRUPTURED CONTAINERS.AVOID
SPREADING BURNING LIQ W/WTR USED FOR COOLING PURP
Unusual Fire/Explosion Hazard:THE MATERIAL CAN SPLATTER IF TEMP EXCEEDS
BOILING POINT.THE RESIDUAL SOLIDS ARE CAPABLE OF BURNING,GIVING OFF
CARBON MONOXIDE & CARBON DIOXIDE, ETC.

Accidental Release

Spill Release Procedures:RECOVER FREE LIQ.PICK UP REMAINING LIQ
W/ABSORBANTMATERIAL &PLACE INTO CONTAINER FOR DISPOSAL.WASH AREA
W/WTR & DETERGENT.DO NOT WASH INTO PUBLIC WTRSOURCE.

Handling

Handling and Storage Precautions:PRODUCT SHOULD BE STORED AT ROOM TEMP
TO PROLONG LIFE.KEEP FROM FREEZING SO PRODUCT DOES NOT COAGULATE.DO
NOT APPLY WHEN TEMP IS BELOW 50F/10C.
Other Precautions:DO NOT TAKE INTERNALLY.AVOID PROLONGED CONTACT W/SKIN
OR BREATHING OF SPRAY MISTCLOSE CONTAINER AFTER EACH USE.KEEP AWAY
FROM CHILDREN.THESE PRODUCTS CONTAIN NOLEAD PIGMENTS.

Exposure Controls

Respiratory Protection:USE ORGANIC VAPOR CANISTER OR SUPPLIED-AIR
RESPIRATORY PROTECTION WHEN TLV IS EXCEEDED.
Ventilation:ALL APPLICATION AREAS SHOULD BE PROVIDED W/SUFFICIENT
MECHANICAL VENT W/EXPLOSION PROOF EQUIP TO MAINTAIN EXPO LEVELProtective Gloves:IMPERMEABLE
Eye Protection:FFSPLASH GOGGLES OR FACE SHIELD
Work Hygienic Practices:USE PROTECTIVE CREAM WHERE SKIN CONTACT IS
LIKELY.WEAR IMPERVIOUS CLOTHING & BOOTS.WASH HANDS BEFORE EATING.
Supplemental Safety and Health
WORK HYGIENE: SMOKE IN SMOKING AREA ONLY.

Chemical Properties

Boiling Pt:B.P. Text:212F 100C
Vapor Density:< AIR
pH:8.5
Viscosity:80-100KU
Evaporation Rate & Reference:< ETHER
Solubility in Water:COMPLETE
Appearance and Odor:THICK LIQUID, WHITE & VARIOUS COLORS, SLIGHT
AMMONIA ODOR
Percent Volatiles by Volume:59.5

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH TEMPERATURE
Hazardous Decomposition Products:WHEN PRODUCT IS HEATED TO
DECOMPOSITION IT MAY PRODUCE FUMESWHICH CONTAIN CABON MONOXIDE &
CARBON DIOXIDE, ETC.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL,STATE & LOCAL
REGULATIONS.BEFORE ATTEMPTING CLEAN UP, REFER TO HAZARD CAUTION
INFORMATION IN OTHER SELECTIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.