BHDYD - RTV 106, SEALANT

  • MSDS: BHDYD
  • Manufacturer: GENERAL ELECTRIC COMPANY
  • Product Name: RTV 106, SEALANT
  • National Stock Number: 8040-00-902-3871
Product Identification

Product ID:RTV 106, SEALANT
MSDS Date:10/21/1985
FSC:8040
NIIN:00-902-3871
MSDS Number: BHDYD

Responsible Party
GENERAL ELECTRIC COMPANY
SILICONE PRODUCTS DIVISION
WATERFORD, NY 12188
US

Emergency Phone: (518) 237-3330

Info Phone: (518) 237-3330

Preparer: DA POLSINELLI

Cage: OD426

Contractor
MULTI-AMP CORP
24552 DALLAS, TX 75237-1019 US

Telephone: 518-237-3330

Cage: 00426

Ingredients

METHYLTRIACETOXYSILANE

CAS: 4253-34-3

Fraction By Weight: <05%

ACGIH TLV: 10 PPM

Hazards

LD50 LC50 Mixture:ORAL LD50/2060 (RAT)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:NONE
Effects of Overexposure:INGEST: NONE EYE: UNCURED PRODUCT CONTACT
IRRITATES EYES. SKIN: WILL IRRITATE LIPS, GUMS, TONGUE, & MAY
IRRITATE SKIN. INHALATION:
MAY CAUSE MILD RESPIRATORY I RRITATION. APPLIES ONLY IN UNCURED
STATE
Medical Cond Aggravated by Exposure:NONE

First Aid

First Aid:INGESTION: RINSE MOUTH W/ WATER SEVERAL TIMES.
SKIN: REMOVE COMPLETELY W/DRY CLOTH OR PAPER
TOWEL, BEFORE WASHING W/DETERGENT AND WATER. INHALATION: MOVE
PERSON TO F RESH AIR.EYES: IMMEDIATELY FLUSH WITH WATER FOR 15
MINUTES. GET MEDICAL ATTENTION IF IRRITATION PRESISTS.

Fire Fighting

Flash Point Method:PMCC
Flash Point:210F/98.9C
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA
Fire Fighting Procedures:NONE KNOWN
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:WIPE OR SOAK UP IN AN INERT MATERIAL AND PUT
IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACE WITH DETERGENT &
WATER TO REDUCE SLIPPING HAZARD.

Handling

Handling and Storage Precautions:AVOID CONTACT W/SKIN & EYES. WEARERS
OF CONTACT LENSES MUST NOT HANDLE LENSES UNTIL SEALANT IS
CLEANED FROM FINGERTIPS.
Other Precautions:PRODUCT RELEASES ACETIC ACID DURING APPLICATION AND
CURING. USE MECHANICAL VENT ILATION TO STAY BELOW TLV OF 10PPM
ACETIC ACID.

Exposure Controls

Respiratory Protection:USE IN WELL VENTILATED AREA.
Ventilation:MECHANICAL VENTILATION
Protective Gloves:RUBBER OR CLOTH GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYEWASH FACILITY
Work Hygienic Practices:NONE
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NA
Vapor Pres:(20 C)
Vapor Density:NEGL.
Spec Gravity:1.01
Evaporation Rate & Reference:<1
Solubility in Water:INSOLUBLE
Appearance and Odor:ACETIC ACID ODOR, RED IN APPEARANCE
Percent Volatiles by Volume:<5

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:SILICON DIOXIDE, ACETIC ACID

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
STATE, LOCAL, AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.