BHDZC - MIL-L81352A, K8-030, LITE GRAY 16473

  • MSDS: BHDZC
  • Manufacturer: CRAWFORD LABORATORIES INC
  • Product Name: MIL-L81352A, K8-030, LITE GRAY 16473
  • National Stock Number: 8010-00-935-7076
Product Identification

Product ID:MIL-L81352A, K8-030, LITE GRAY 16473
MSDS Date:10/15/1987
FSC:8010
NIIN:00-935-7076
MSDS Number: BHDZC

Responsible Party
CRAWFORD LABORATORIES, INC.
4165 SOUTH EMERALD AVENUE
CHICAGO, IL 60609
US

Emergency Phone: 312-433-1307

Info Phone: 312-376-7132

Cage: DO165

Contractor
CRAWFORD LABORATORIES, INC
CHICAGO, IL 60609 US

Telephone: 312-376-7132

Cage: 5V430

Ingredients

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 20-50%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5-20%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: 5-20%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM; 9192


ACRYLIC RESIN

Fraction By Weight: <1%


BUTYL BENZYL PHTHALATE (SARA III)

CAS: 85-68-7

RTECS: TH9990000

Fraction By Weight: 1-5%

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


ACETATES

CAS: 108-65-6

RTECS: AI8925000

Fraction By Weight: <1%

OSHA PEL NONE ESTABLISHED

ACGIH TLV: NONE ESTABLISHED


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <1 - 4%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE TOXICITY
Effects of Overexposure:EYE: IRRITATION; SKIN: DEFATTING,DRYING,
IRRITATION AND DERMATITIS. INHAL: HEADACHE, DIZZINESS,
NAUSEA, & LOSS OF CONSCIOUSNESS, & MUCOUS MEMBRANES INGST: VOMITING

First Aid

First Aid:EYE: FLUSH W/PLENTY OF CLEAN LKEWARM WTR FOR 15 MINS. LIFTING
EYELIDS,MED. ATTN.SKIN: FLUSH W/WTR, REMOVE CONTAMINATED
CLOTHING/SHOES. WASH W/SOAP & WTR. INHAL: REMOVE TO FRESH
AIR, GIVE ARTIFIC IAL RESP. IF NECESSARY,KEEP VICTIM QUIETGET
MEDICAL ATTENTION.; INGST: DONOT INDUCE VOMITING, IF IT OCCURS KEEP
HEAD BELOW HIPS. ADMINISTER LKEWRM WTR IF PERSON IS CONSCIOUS, GET
MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:SCC
Flash Point:20F/-6.67C
Upper Limits:0.8
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WATER MAY BE USED TO KEEP EXPOSED CONTNRS
COOL, & TO KEEP FLAMBLE STRUCT. WET. DONOT ENTER FIRE AREA W/O
PROPER PROTEC. BECAUSE HAZ. DECOMP. PROD. MAY BE PRSNT
Unusual Fire/Explosion Hazard:WATER PRESSURE MAY SPREAD A FLAMMABLE
LIQUID FIRE. SEALED CONTAINERS MAY EXPLODEIF OVERHEATED.

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. EQUIPMENT MUST
BE GROUNDED TO PREVENT SPARKING. SOAK UP W/ABSORBENT AND PLACE IN
NON LEAKING CONTAINERS. SEAL TIGHTLY FOR PROPER DISPOSAL.

Handling

Handling and Storage Precautions:KNOW APPLICABLE D.O.T. REGULATION
BEFORE ATTEMPTINTO TRANSPORT THIS MATERIAL.

Exposure Controls

Respiratory Protection:PROVIDE ADEQUATE VENTILATION; IN MORE CONFINED
AREAS A NIOSH/MSHA APPROVED RESPIRATOR EQUIPPED W/ORGANIC VAPOR
CARTRIDGE SHOULD BE WORN.
Ventilation:ADEQUATE VENTILATION
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLE & FACE SHIELD
Other Protective Equipment:EYE BATH
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:175-698F
Vapor Density:> AIR
Evaporation Rate & Reference:3.44 X N-BUTYL ACETATE
Appearance and Odor:LITE GRAY LIQUID
Percent Volatiles by Volume:68.5

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS AND STRONG ALKALIES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES, &
INCOMPATIBILITIES
Hazardous Decomposition Products:INCOMPLETE COMBUSTION FOR PRODUCTS
LIKE THIS MAY GENERATE HIGHLY POISONOUS CARBON MONOXIDE & OTHER
TOXIC GASES.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE W/CURRENT LOCAL,
STATE, AND FEDERAL REGULATIONS. CONTACT APPROVED DISPOSAL
FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.