BHFDD - POLYAMID, COMPONENT 2 UO-082 PART B

  • MSDS: BHFDD
  • Manufacturer: CRAWFORD LABORATORIES INC
  • Product Name: POLYAMID, COMPONENT 2 UO-082 PART B
  • National Stock Number: 8010-01-053-2658
Product Identification

Product ID:POLYAMID, COMPONENT 2 UO-082 PART B
MSDS Date:10/20/1987
FSC:8010
NIIN:01-053-2658
Kit Part:Y
MSDS Number: BHFDD

Responsible Party
CRAWFORD LABORATORIES, INC.
4165 SOUTH EMERALD AVENUE
CHICAGO, IL 60609
US

Emergency Phone: 312-433-1307

Info Phone: 312-376-7132

Cage: DO165

Contractor
CRAWFORD LABORATORIES, INC
CHICAGO, IL 60609 US

Telephone: 312-376-7132

Cage: 5V430

Ingredients

ALCOHOL

CAS: 67-63-0

Fraction By Weight: 5-20%


ALIPHATIC KETONE

CAS: 78-93-3

RTECS: NE1647500

Fraction By Weight: 20-30%

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ALCOHOL

CAS: 67-63-0

Fraction By Weight: 20-30%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WARNING: CARE MUST BE TAKEN NOT TO
EXCEED THE EXPOSURE LIMIT FOR THE LOWEST TLV SHOWN. WHEN IN DOUBT.
WEAR AN APPROVED RESPIRATOR AND ORDER AIR SAMPLING TESTS
Effects of Overexposure:1-ACUTE TOXICITY, RESULTING: HEADACHE,
DIZZINESS, NAUSEA, AND LOSS OF CONSCOUSNESS. 2-EYE IRRI 3-IRRI
MUCOUS MEMBRANES 4-VOMITING DUE TO INGESTION 5-DEFATTING &DRYING OF
SKIN. WHICH MAY RESULT IN IRRI TATION AND DERMATITIS
Medical Cond Aggravated by Exposure:NK
INGESTION: IF VOMIT OCCURS, KEEP HEAD BELOW HIPS TP
PREVENT ASPIRATION OF LIQ INTO LUNGS. GET MED. ATTN. IF
CONSCIOUS/ALERT, ADMIN LUKEWARM PINT WTR

First Aid

First Aid:EYE: FLUSH WITH PLENTY OF WATER 15 MIN. LIFTING EYELIDS. GET
MED ATTN. INHALATION: REMOVE TO FRESH AIR?OXYGEN IS BREATHING IS
DIFF. GIVE CPR IF NOT BREATHING. GET MED ATTN. KEEP QUIET. NEVER
GIVE AN U NCONSCIOUS PERSON LIQUID. SKIN: FLUSH W/WATER, REMOVE
CONTAM CLOTHING. WASH W/SOAP & WATER. DO NOT REUSE CLOTH UNTIL
CLEANED. IF IRR PERSISTS, GE MED ATTN. INGESTION. DO NOT INDUCE
VOMIT. SEE ABOVE

Fire Fighting

Flash Point Method:SCC
Flash Point:22 F -5.56 C
Upper Limits:2.
Extinguishing Media:FOAM, CO2, OR DRY CHEMICAL
Fire Fighting Procedures:WATER MAY BE USED TO KEEP EXPOSED CONTAINERS
COOL & WET. DO NOT ENTER FIRE AREA WITHOUT PROPER PROTECTION
BECAUSE HAZARDOUS DECOMPOSITION PRODUCT MAY BE PRESENT
Unusual Fire/Explosion Hazard:1-ACUTE TOXICITY, RESULTING: HEADACHES,
DIZZINES, NAUSEA, & LOSS OF CONSCIOUSNES2-EYE IRRI 3-IRRITATED
MUCOUS MEMBRANES 4-VOMITING 5-DEFATTING, IRRI, DERMATITIS

Accidental Release

Spill Release Procedures:FLAMMABLE, ELIMINATE ALL IGNITION SOURCES.
HANDLING EQUIP MUST BE GROUNDED TO PREVENT SPARKING SOAK UP WITH AN
ABSORBENT & PLACE IN NON-LEAKING CONTAINERS. SEAL TIGHTLY FOR
PROPER DISPOSAL

Handling

Handling and Storage Precautions:TREAT AS A HAZARDOUS-FLAMMABLE
MATERIAL. KNOW APPLICABLE D.O.T. REG BEFORE ATTEMPTING TO TRANSPORT
THIS MATERIAL

Exposure Controls

Respiratory Protection:IMPORTANT-MUST PROVIDE ADEQUATE VENTILATION TO
MAINTAIN VAPOR CONCENTRATIONS BELOW THE ESTABLISHED TLV LIMIT AS
GIVEN BY OSHA. IN MORE CONFINED AREAS A NIOSH/MSHA APPROVED
RESPIRATOR EQUIOPPED WITH OR GNIC VAPOR CARTRIDGE SHOULD BE WORN.
Ventilation:MUST PROVIDE ADEQUATE VENTILATION. SEE PARAGRAPH ABOVE
Protective Gloves:RUBBER GLOVES
Eye Protection:SAFETY GOGGLES &/OR FACE SHIELD
Other Protective Equipment:HAVE EYE BATH AVAILABLE
Work Hygienic Practices:GOOD PERSONAL HYGIENE PRACTICES
Supplemental Safety and Health
TEAT AS A HAZARDOUS - FLAMMABLE MATERIAL. KNOW APPLICABLE D.O.T.
REGULATIONS BEFORE ATTEMPTING TO TRANSPORT THIS MATERIAL

Chemical Properties

Boiling Pt:B.P. Text:175-180 F
Vapor Density:> AIR
Evaporation Rate & Reference:2.35 X N-BUTYL ACETATE
Appearance and Odor:CLEAR LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
HEAT, SPARKS, OPEN FLAMES & INCOMPATIBILITIES WITH OXIDIXINGAGENTS &
STRONG ALKALIES.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION FOR PRODUCT LIKE
THIS MAY GENERATE HIGHLY POISONOUS CARBON MONOXIDE & OTHER TOXIC
GASES

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH CURRENT
LOCAL,STATE & FED REGULATIONS. CONTACT AN APPROVED DISPOSAL
FACILITY

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.