BHFDW - ABLEBOND 212-12T
- MSDS: BHFDW
- Manufacturer: ABLESTIK LABORATORIES
- Product Name: ABLEBOND 212-12T
- National Stock Number: 8040-01-115-8012
Product Identification
Product ID:ABLEBOND 212-12T
MSDS Date:03/01/1988
FSC:8040
NIIN:01-115-8012
MSDS Number: BHFDW
Responsible Party
GARDENA, CA 90248
US
Emergency Phone: (213) 532-9341
Info Phone: (213) 532-9341
Cage: 9V874
Contractor
Telephone: 310-764-4600
Cage: 21109
Ingredients
BISPHENOL A LIQUID EPOXY RESIN
CAS: 25068-38-6
RTECS: SL6310000
OSHA PEL NOT EST
ACGIH TLV: NOT EST
VINYL CYCLOHEXENE DIOXIDE
CAS: 106-87-6
RTECS: RN8640000
OSHA PEL S, 10 PPM
ACGIH TLV: S, 10 PPM ;A2; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Explanation of Carcinogenicity:VINYLCYCLOHEXENE DIOXIDE IS CONDSIDERED
TO BE CARCINOGENIC BY ACGIH.
Effects of Overexposure:INHALATION: MAY BE HARMFUL TO THE RESPIRATORY
SYSTEM. SKIN: MAY CAUSE DERMATITIS, SKIN SENSITIZATION AND
SKIN CANCERS. PROLONGED CONTACT CAN RESULT IN ABSORPTION OF
HARMFUL AMOUNTS OF MATE RIALS. EYES: CAN CAUSE SEVERE
EYEIRRITATION. INGESTION: MAY CAUSE NAUSEA, VOMITING, AND
DIARRHEA.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SEEK
MEDICAL ATTENTION. SKIN: WASH IMMEDIATELY WITH SOAP AND
WATER. IF IRRITATION PERSISTS, SEEK MEDI-CAL ATTENTION
IMMEDIATELY. INHALATION: REMOVE TO FRESH AIR
IMMEDIATELY.INGESTION: SEEK MEDICAL ATTENTION IMMEDIATELY AND SHOW
INSERT CARD.
Fire Fighting
Flash Point Method:COC
Flash Point:220F/>40.00C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC
Accidental Release
Spill Release Procedures:WIPE UP WITH SOLVENT SATURATED TOWELING AND
COLLECT IN AN APPROPRIATE CONTAINER FOR DISPOSAL.
Handling
Handling and Storage Precautions:STORE FROZEN AT ALL TIMES.
Other Precautions:AVOID CONTACT WITH SKIN, EYES AND CLOTHING. GOOD
HOUSEKEEPING IS REQUIRED. AVOID INHALATION OF VAPORS.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR RESPIRATOR IF
NEEDED.
Ventilation:USE ADEQUATE VENTILATION. LOCAL EXHAUSE IS RECOMMENDED
WHENAPPROPRIATE TO CONTROL EMPLOYEE'S EXPOSURE.
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES WITH SIDE SHIELDS.
Other Protective Equipment:PROTECTIVE EQUIPMENT TO COVER EXPOSED AREAS.
Work Hygienic Practices:VENT CURING OVEN TO OUTDOORS.
Supplemental Safety and Health
AVOID CONTACT WITH SKIN, EYES AND CLOTHING. AVOID INHALATION OF
VAPORS.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:0.1
Vapor Density:4.8
Spec Gravity:1.0
Evaporation Rate & Reference:0.01 FOR VHCD
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE PASTE, PLEASANT ODOR
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT PRIOR TO CURE
Hazardous Decomposition Products:CARBON MONOXIDE AND/OR CARBON DIOXIDE
Conditions to Avoid Polymerization:EXCESSVE HEAT.USE FOR THIN BOND LINE
APPLICTN-CHEM REACTION CAN OCCUR.CURED PRODUCT:USE W/CAUTION--VENT
OVEN TO OUTDOORS
Disposal
Waste Disposal Methods:DISPOSE IN APPROVED CHEMICAL DISPOSAL AREA OR IN
AMANNER WHICH COMPLIES WITH ALL LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.