BHFFJ - COATING POLYURETHANE COMPONENT B ID 754201

  • MSDS: BHFFJ
  • Manufacturer: PRATT AND LAMBERT INC
  • Product Name: COATING POLYURETHANE COMPONENT B ID 754201
  • National Stock Number: 8010-01-130-3347
Product Identification

Product ID:COATING POLYURETHANE COMPONENT B ID 754201
MSDS Date:10/15/1987
FSC:8010
NIIN:01-130-3347
Kit Part:Y
MSDS Number: BHFFJ

Responsible Party
PRATT & LAMBERT, INC.
16116 E 13TH ST
WICHITA, KS 67201
US

Preparer: W.A. ELLISON

Cage: FO127

Contractor
PRATT AND LAMBERT INC
22 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


1,6-DIISOCYANATOHEXANE (HEXAMETHYLENE DIISOCYANATE)

CAS: 822-06-0

RTECS: MO1740000

ACGIH TLV: 0.005 PPM; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


VOC. ORGANIC CMPD 2.2 LB/GL LESS WATER & NPRS* 264 G/L LESS

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SWALLOWING: CAN CAUSE GASTROINTESTINAL
IRR/NAUSEA/VOMIT. ASPIRATION OF MAT'L MAYCAUSE CHEM PNEUMONITIS.
INHALATION: WARNING-VAPOR/MIST HARMFUL. OVEREXPOSURE MAYCAUSE LUNG
DAMAGE/LUNG & RESPIRATORY IRR /ALLERGIC REACTION. EFFECTS MAY BE
PER-MANENT. EYE:MAY CAUSE EYE IRR. SKIN: SKIN IRRITANT. MAY CAUSE
SKIN SENSITIZATION
Effects of Overexposure:REPORTS HAVE ASSOCIATED PROLONGED AND REPEATED
OCCUPATIONAL OVEREXPOSURE TO SOL-VENTS WITH PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DE- LIBERATELY
CONCENTRATING AND INHALING TH E CONTENTS MAY BE HARMFUL OR FATAL.
RE-PEATED EXPOSURE TO DIISOCYANATES MAY RESULT IN RESPIRATORY
SENSITIZATION.

First Aid

First Aid:SWALLOWING: GET MEDICAL ATTENTION IMMEDIATELY. INHALATION:
REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED GIVE CPR. GET MED
ATTN. EYE: FLUSH W/WATER FOR 15 MIN LIFTING UPPER/LOWER LIDS. GET
MED ATTN. SKIN: REMOVE CONTAMINATED CLOTHING.WASH AFFECTED AREA.
OBTAIN MED ATTN IF IRR'N PERSISTS. TREATMENT REQ FOR OVER-
EXPOSURE S/B DIRECTED AT THE CONTROL OF SYMPTOMS AND THE CLINICAL
CONDITIONS.

Fire Fighting

Flash Point:72F 22C
Extinguishing Media:USE NFPA CLASS B FIRE EXTINGUISHERS. POLYMER FOAM
IS PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. WATER
TO COOL CONT TO PREVENT POSSIBLE AUTO-IGNITION OR EXPLOSION. IF
WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMPOSITION PRODUCTS
MAY CAUSE A HEALTH HAZARD. SYMPTOMS MAY NOT BE IMMEDIATELY
APPARENT. OBTAIN MEDICAL ATTENTION. WARNING! FLAMMABLE.

Accidental Release

Spill Release Procedures:ELIM ALL IGNITION SOURCES. DIKE/CONTAIN SPILL
WITHINERT MAT'L. TRANSFER LIQ'S/ABSORBENT DIKING MAT'LIN COVERED
METAL CONT'S FOR RECOVERY/DISPOSAL. USEONLY NON-SPARKING TOOLS.
PREVENT CONTAM OF SEWERS/ STREAMS/GROUNDWATER W/SPILLED MAT'L/USED
ABSORBENT

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 95 DEGREES F. STORE
LARGE QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106.
Other Precautions:DO NOT-USE IF BREATHING PROBLEMS/REUSE EMPTY
CONT/TAKE INTERNALLY. CONT'ER S/B GROUNDED AND BONDED TO THE
RECEIVING CONTAINER. DO NOT WELD/BRAZE OR CUT CONT'R.NEVER USE
PRESSURE TO EMPTY. DRUM IS NOT A PRESSURE VESSEL. CLOSE AFTER EA
USE.

Exposure Controls

Respiratory Protection:USE POSITIVE PRESS AIR RESPIRATOR (TC 18C
NIOSH/MSHA). IF NOT AVAIL, USE VAPOR PARTICULATE RESP RECOM BY
MANUFACTURER UNTIL ISOCYANATE VAPORS/MISTS ARE GONE. USE POSITIVE
PRES AIR-SUPP RESP NIOSH SC HEDULE TC19C. SEE OSHA 29 CFR 1910.134.
Ventilation:PROVIDE DILUTION/LOCAL EXHAUST VENTILATION TO KEEP
CONCENTRAOF HAZARDOUS SUBSTANCES BELOW EXPOSURE LIMITS STATED.
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:WEAR SAFETY SPEC'LES/CHEM SPLASH GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH WITH SOAP AND WATER HANDS/FACE THROUGHLY
BEFORE EATING OR DRINKING.
Supplemental Safety and Health
KEY1=F4.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:260F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:30

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS. OXIDIZING MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
IGNITION.
Hazardous Decomposition Products:BURNING, INCLUDING WHEN HEATED BY
WELDING OR CUTTING, WILL PRODUCE SMOKE/CARBON MONOXIDE/CARBON
DIOXIDE/NITROGEN OXIDES
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT, SPARKS AND
FLAME.

Disposal

Waste Disposal Methods:INCINERATE ONLY IN EPA PERMITTED FACILITY.
DISPOSEONLY IAW FED/STATE/LOCAL REGS. DO NOT INCINERATE CLOSED
CONTAINERS. OBSERVE PRECAUTIONS FOR DIS- POSAL OF FLAMMABLE
MAT'S. CONTAMINATED ABSORBENT MAY BE DISPOSED IN A HAZARDOUS
WASTE LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.