BHFVK - FUSE - ON 905 PRIMER FOR PVC PLASTIC PIPE
- MSDS: BHFVK
- Manufacturer: INDUSTRIAL POLYCHEMICAL SERVICE
- Product Name: FUSE - ON 905 PRIMER FOR PVC PLASTIC PIPE
- National Stock Number: 8040-01-004-2705
Product Identification
Product ID:FUSE - ON 905 PRIMER FOR PVC PLASTIC PIPE
MSDS Date:03/01/1986
FSC:8040
NIIN:01-004-2705
MSDS Number: BHFVK
Responsible Party
GARDENA, CA 90248
US
Emergency Phone: 213-321-6515
Info Phone: 213-321-6515
Cage: 17510
Contractor
Telephone: 310-898-3300
Cage: 17510
Ingredients
TETRAHYDROFURAN (SARA III)
CAS: 109-99-9
RTECS: LU5950000
Fraction By Weight: MAJOR
OSHA PEL 200 PPM/250 STEL
ACGIH TLV: 200 PPM/250STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: MINOR
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CYCLOHEXANE (SARA III)
CAS: 110-82-7
RTECS: GU6300000
Fraction By Weight: MINOR
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM, 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
DIMETHYLFORMAMIDE
CAS: 68-12-2
RTECS: LQ2100000
Fraction By Weight: MINOR
OSHA PEL S, 10 PPM
ACGIH TLV: S, 10 PPM; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:INHAL: MAJOR ROUTE. NAUSEA, DIZZINESS,
HEADACHE. NARCOSIS, IRRI OF EYES/NASAL PASSAGES.SKIN: IRRI. MAY
PRODUCE CUMULATIVE INJURY WHEN REPEAT ABSORB THROUGH SKININ LRG
AMTS. DEFATTING. EYES: LIQ MAY CA USE TEMP IRRI, PAINFUL BURNING OF
EYES/LIDS, WATERING & INFLMMATION OF CONJUCTIVA. INGES: NO EFFECTS
EXPECTED
First Aid
First Aid:INHAL: OVERCOME BY VAPORS, REMOVE TO FRESH AIR & IF BREATHING
STOPPED GIVE CPR, PREFERABLY MOUTH-TO-MOUTH. IF DIFF GIVE OXYGEN.
CALL PHYSICIAN. EYE & SKIN: REMOVE CONTAM CLOTHES. WASH WITH PLENTY
OF W TR 15 MIN. CALL A PHYSICIAN. INGES: IF SWALLOWED, DO NOT
INDUCE VOMITING. CALL PHYSICIAN IMMEDIATELY
Fire Fighting
Flash Point Method:TCC
Flash Point:6 F -14.44 C
Lower Limits:2
Upper Limits:11.8
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM, ANSUL "PURPLE
K", WATER FOG
Fire Fighting Procedures:EVACUATE AREA. STAY UPWIND. CLOSE/CONFINED
QUARTERS REQUIRE, SELF CONTAINED BREATHING APPARATUS; POS PRESSURE
HOSE MASK/AIRLINE MASK. WTR TO COOL/FLUSH CONTAIN
Unusual Fire/Explosion Hazard:FIRE HAZARD BECAUSE OF LOW FLASH POINT &
HIGH VOLATILITY. VAPORS ARE HEAVIER THAN AIR AND MAY TRAVEL TO
SOURCE OF IGNITIONS
Accidental Release
Spill Release Procedures:REMOVE ALL IGNIT SOURCES. AVOID BREATHING
VAPORS. KEEP LIQUID OUT OF EYES. FLUSH WITH LRG VOL OF WTRCONTAIN
LIQ W/SAND OR EARTH. ABSORB W/SAND OR NON-FLAMMABLE ABSORBENT &
TRANS TO STEEL DRUMS FOR DIS POSAL. PREVENT LIQ FROM ENTERING
DRAINS
Handling
Handling and Storage Precautions:STORE IN THE SHADE BETWEEN 40 F & 110
F. KEEP AWAYFROM HEAT, SPARKS, & OTHER SOURCES OF IGNIT.
AVOIDPROLONGED BREATHING OF VAPOR. ADEQUATE VENTILATION
Other Precautions:FOLLOW ALL PRECAUTIONARY INFORMATION GIVEN ON THE
CONTAINER LABLE, PRODUCT BULLETINS AND OUR SOLVENT CEMENTING
LITERATURE. ALL HANDLING EQUIPMENT SHOULD BE ELECTRICALLY GROUNDED
Exposure Controls
Respiratory Protection:NONE REQUIRED WITH ADEQUATE VENT. USE NIOSH
APPROVED RESPIRATOR FOR ORGANIC VAPORS FOR CONFINED AREAS, E.G.,
MINE SAFETY APPLIANCE CAT. #460968 WITH CHEMICAL CARTRIDGE # 464031
Ventilation:PROVIDE ADEQUATE VENT. VAPOR CONCENTRATION MUST BE KEPT
WELLBELOW TLV.
Protective Gloves:RUBBER OR PVA
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:IMPERVIOUS APRON (IF NEEDED)
Supplemental Safety and Health
NK
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:151 F (THF)
Vapor Pres:143MMHG@20
Vapor Density:2.49
Spec Gravity:0.870+0.010
Evaporation Rate & Reference:BUAC=1, INTIALLY 8
Solubility in Water:SOLUBLE IN WATER
Appearance and Odor:CLEAR OR PURPLE COLOR, ETHEREAL
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
CAUSTICS, AMMONIA, INORGANIC ACIDS, CHLORINATED COMPOUNDS, STRONG
OXIDIZERS & ISOCYNATES.
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS, OPEN FLAME &
OTHER SOURCES OF IGNITION. THIS IS A VERY STABLE LIQUID AT NORMAL
AMBIENT TEMP
Hazardous Decomposition Products:HYDROGEN DIOXIDE, HYDROGEN MONOXIDE,
CARBON DIOXIDE, CARBON MONOXIDE & VARIOUS HYDROCARBONS
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT, SPARKS, OPEN
FLAME AND OTHER SOURCES OFIGNITION
Disposal
Waste Disposal Methods:FOLLOW LOCAL, STATE & FED REG. CONSULT DISPOSAL
EXPERT. CAN BE DISPOSED OF BY INCINERATION. EXCESSIVE QUANTITIES
SHOULD NOT BE ALLOWED TO ENTER DRAINS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.