BHFVS - ENAMEL, ALKYD GLOSS GOLD 17043
- MSDS: BHFVS
- Manufacturer: FARWEST PAINT MANUFACTURING CO
- Product Name: ENAMEL, ALKYD GLOSS GOLD 17043
- National Stock Number: 8010-01-040-5786
Product Identification
Product ID:ENAMEL, ALKYD GLOSS GOLD 17043
MSDS Date:02/09/1989
FSC:8010
NIIN:01-040-5786
MSDS Number: BHFVS
Responsible Party
TUKWILA, WA 98168
US
Emergency Phone: (206) 941-1619
Info Phone: (206) 244-8844
Cage: 2F266
Contractor
Telephone: 206-244-8844
Cage: 6F266
Ingredients
PIGMENTS
Fraction By Weight: 5-10%
RESIN/VEHICLE
Fraction By Weight: 30-35%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
STODDARD SOLVENT
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 54-59%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM; 9293
METAL SOAP DRIERS
Fraction By Weight: <2%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
OTHERS
Fraction By Weight: <1%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ASPIRATION OF MATERIAL INTO THE LUNGS
CAN CAUSE CHEMICAL PNYEUMONITIS WHICH CAN BE FATAL.
Effects of Overexposure:EYE: SEVERE IRRIT., REDNESS, TEARING, BLURRED
VISION SKIN: MOD. IRRITATION, DEFATTING,
DERMATITIS INHAL: NASAL/RESP.
IRRIT.,DIZZINESS,WEAK NESS,FATIGUE,NAUSE,HDACH,UNCONSCIOUSNESS&
EVEN ASPHYXIATION,;INGST: GASTROINTESTINAL IRRIT.,NAUSEA,VOMITING,
& DIARRHEA
First Aid
First Aid:EYE: FLUSH W/LG AMNT OF WTR,LIFTING EYELIDS OCCASIONALLY,GET
MEDICAL ATTENTION. SKIN: WASH AREA W/SOAP & WATER, REMOVE
CONTAMINATED CLOTHING INHAL: REMOVE TO FRESH
AIR,GIVE ARTIFICI AL RESP. IF NEEDED,KEEP WARM/QUIET ANDGET MEDICAL
ATTENTION; INGST: DO NOT INDUCE VOMITING,KEEP PERSON WAR/QUIET &
GETMEDICAL ATTENTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:100F/37.78C
Lower Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SCBA WITH A FULL FACEPIECE OPERATED IN
PRESSURE DEMAND OR OTHER POSITIVE PRESS. MODE.
Unusual Fire/Explosion Hazard:DRUM EVEN EMPTY BECAUSE PRODUCT CAN
IGNITE EXPLOSIVELY, EVEN THE RESIDUE. NEVER USE NEAR OR AROUND
WELDERS OR CUTTING TORCHES.
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGN. STOP SPILL AT
SOURCEABSORB W/ABSORBENT MATL.,DIKE AREA TO PREVENT SPREADING,PUMP
LIQ TO SALVAGE TANK OR HOOD. PREVENT RUN OFF TO SEWERS,STREAMS,
OR OTHER BODIES OF WATER.
Handling
Handling and Storage Precautions:CONTNRS OF THE MATL MAY BE HAZARDOUS
W/EMPTIED, SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES.
Other Precautions:IF RUN OFF OCCURS,NOTIFY PROPER AUTHORITIES AS
REQUIRED THAT A SPILL HAS OCCURED
Exposure Controls
Respiratory Protection:NIOSH/MSHA JOINTLY APPROVED AIR SUPPLIED
RESPIRATOR, ALSO NIOSH/MSHA RESPIRATORSUNDER SPECIFIED CONDITIONS.
Ventilation:LOCAL EXHAUST OR MECHANICAL
Protective Gloves:NITRILE RUBBER
Eye Protection:CHEMICAL SPLASH GOGGLES/SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING AND BOOTS
Work Hygienic Practices:KEEP WORK AREA CLEAN & FREE FROM LEAKS, &
SPILLS. WASH HANDSTHOROUGHLY W/SOAP & WATER BEFORE HANDLING FOOD &
DRINKS.
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:300-390F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:GOLD COLOR LIQUID W/MILD SWEET AROMATIC ODOR
Percent Volatiles by Volume:<58
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP AWAY FROM OPEN FLAMES, SPARKS, AND
HEAT, DO NOT WELD NEAR OR AROUND PRODUCT.
Disposal
Waste Disposal Methods:DESTROY BY LIQ. INCINERATION. DISPOSE OF IN
ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.