BHGMX - ABLEBOND 117-1
- MSDS: BHGMX
- Manufacturer: ABLESTIK LABORATORIES
- Product Name: ABLEBOND 117-1
- National Stock Number: 8040-00F009504
Product Identification
Product ID:ABLEBOND 117-1
MSDS Date:06/28/1988
FSC:8040
NIIN:00F009504
MSDS Number: BHGMX
Responsible Party
GARDENA, CA 90248
Emergency Phone: (213) 532-9341
Info Phone: (213) 532-9341
Cage: 9V874
Contractor
Telephone: 310-764-4600
Cage: 21109
Ingredients
N-BUTYL GLYCIDYL ETHER (BGE)
CAS: 2426-08-6
RTECS: TX4200000
OSHA PEL 50 PPM
ACGIH TLV: 25 PPM; 9293
DIETHYLENE TRIAMINE
CAS: 111-40-0
RTECS: IE1225000
OSHA PEL 1 PPM
ACGIH TLV: S, 1 PPM; 9192
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT) = 1.53 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY BE HARMFUL. MAY CAUSE
IRRITATION TO THE NOSE, THROAT & RESPIRATORY TRACT. SKIN: MAY CAUSE
ALLERGIC REACTION. EYE: CAN BE SEVERELY IRRITATING. INGESTION:
MODERATELY TOXIC & MAY BE HARMF UL IF SWALLOWED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION, SENSITIZATION, & DERMATITIS.
MODERATELY TOXIC & MAY BE HARMFUL IF ABSORBED THROUGH
SKIN/INHALATION.
Medical Cond Aggravated by Exposure:ALLERGIC RESPIRATORY REACTION
First Aid
First Aid:EYE: FLUSH W/WATER FOR AT LEAST 15 MINS. SEEK MEDICAL
ATTENTION. SKIN: WASH W/SOAP & WATER. IF IRRITATION PERSISTS, SEEK
MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR IMMEDIATELY.
INGESTION: DON' T INDUCE VOMITING. DON'T GIVE LIQUIDS TO A VERY
DROWSY, CONVULSING OR UNCONSCIOUS PERSON. GIVE LARGE QUANTITY OF
WATER. IF VOMITING OCCURS, REPEAT LIQUID ADMINISTRATION. SEEK
MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:SCC
Flash Point:>164F
Extinguishing Media:CO, FOAM, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DECOMPOSITION & COMBUSTION PRODUCTS MAY
BE TOXIC.
Accidental Release
Spill Release Procedures:WIPE UP WITH SOLVENT SATURATED TOWELING &
COLLECT IN AN APPROPRIATE CONTAINER FOR DISPOSAL.
Handling
Handling and Storage Precautions:AVOID CONTACT W/SKIN, EYES & CLOTHING.
GOOD HOUSEKEEPING IS REQUIRED. AVOID INHALATION OF VAPORS. STORE
FROZEN AT -40C AT ALL TIMES PRIOR TO USE.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR RESPIRATOR IF
NEEDED.
Ventilation:USE WITH ADEQUATE VENTILATION. LOCAL EXHAUST RECOMMENDED
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES W/SIDE SHIELDS
Other Protective Equipment:PROTECTIVE EQUIPMENT TO COVER EXPOSED AREAS.
Work Hygienic Practices:GOOD HOUSEKEEPING IS REQUIRED. VENT CURING OVEN
AT OUTDOORS.
Supplemental Safety and Health
Chemical Properties
Vapor Density:>1
Spec Gravity:1.2
Solubility in Water:SLIGHT
Appearance and Odor:AMBER PASTE; AMMONIACAL ODOR.
Percent Volatiles by Volume:<1
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & STRONG LEWIS OR MINERAL ACIDS
Stability Condition to Avoid:HEAT PRIOR TO CURE.
Hazardous Decomposition Products:CO, ALDEHYDES, OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:EXCESSIVE HEAT. IF THIS PRODUCT IS
NOT USED FOR THIN BOND LINE APPLICATION, VIOLENT CHEMICAL REACTION
CAN RESULT.
Disposal
Waste Disposal Methods:DISPOSE IN APPROVED CHEMICAL DISPOSAL AREA OR IN
A MANNER WHICH COMPLIES WITH ALL LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.