Product ID:CADWELD ALUMINUM WELDING MATERIAL
MSDS Date:11/03/1986
FSC:3439
NIIN:00F009533
MSDS Number: BHGPD

ERICO PRODUCTS INC

34600 SOLON ROAD
SOLON, OH 44139

Emergency Phone: (216) 248-0100

Info Phone: (216) 248-0100

Cage: 14045

ERICO PRODUCTS INC

SOLON, OH 44139-2631 US

Telephone: 216-248-0100

Cage: 14045

TIN(IV) OXIDE

CAS: 18282-10-5

RTECS: XQ4000000

OSHA PEL 2 MG/M3 (SN)

ACGIH TLV: 2 MG/M3 (SN); 9192

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

COPPER OXIDE

CAS: 1317-39-1

RTECS: GL8050000

OSHA PEL 1.0 MG/CUM (DUST)

ACGIH TLV: 1.0 MG/CUM

CALCIUM FLUORIDE

CAS: 7789-75-5

RTECS: EW1760000

OSHA PEL 2.5 MG/M3 (F)

ACGIH TLV: 2.5 MG/M3 (F); 8990

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: BURNS FROM CONTACT W/REACTION OR
PRODUCTS. EYE: DIRECT CONTACT WITH "FLASH" OF LIGHT FROM REACTION,
CAN RESULT IN TEMPORARY BLINDNESS. INHALATION: DUST & FUMES ARE
IRRITANT TO EYES & UPPER RESPI RATORY TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: BURNS FROM CONTACT W/REACTION OR
PRODUCTS. EYE: DIRECT CONTACT WITH "FLASH" OF LIGHT FROM REACTION,
CAN RESULT IN TEMPORARY BLINDNESS. INHALATION: DUST & FUMES ARE
IRRITANT TO EYES & UPPER RESPI RATORY TRACT. STANDARD TREATMENT FOR
BURNS.

First Aid:INHALATION: REMOVE FROM EXPOSURE, PROVIDE FRESH AIR. EYE:
FLUSH WITH WATER, CONSULT PHYSICIAN.

Flash Point:>1650F
Extinguishing Media:NONE
Fire Fighting Procedures:HALOGENATED EXTINGUISHING AGENTS OR WATER
SHOULD NOT BE USED. LET FIRE EXTINGUISH ITSELF. USE SELF-CONTAINED
BREATHING APPARATUS, IN PRESSURE-DEMAND MODE.
Unusual Fire/Explosion Hazard:MATERIAL DUST MAY BE IGNITED BY STATIC
DISCHARGE/BURNS AT EXTREMELY HIGH TEMPERATURE. IT'S READILY
IGNITED/REACTS VERY RAPIDLY AKIN TO AN EXPLOSION.

Spill Release Procedures:ALL UNUSED SPILLED MATERIALS MAY BE SWEPT UP
FOR DISPOSAL USING SOFT, DRY SPONGE OR SOFT NATURAL FIBER BRUSH, &
NON-SPARKING CONDUCTIVE SCOOP. AVOID ACTIONS THAT WOULD CREATE
DUST-LADEN CLOUD OR CAUSE MATERIAL TO DISPERSE IN AIR.

Handling and Storage Precautions:MATERIALS MUST BE KEPT DRY & STORED
ONLY DESIGNATED MFG. OR STORAGE AREA. RESTRICTED TO ACCESS BY
AUTHORIZED PERSONNEL.
Other Precautions:PERSONNEL HANDLING MATERIAL MUST BE WEARING STATIC
GROUNDING DEVICES & PROPER PROTECTIVE CLOTHING. ABSOLUTELY NO
SMOKING OR OPEN FLAME SHALL BE PERMITTED FOR PERSONNEL HANDLING
MATERIAL.

Respiratory Protection:WHERE TLV IS EXCEEDED, USE NIOSH APPROVED
PARTICULATE RESPIRATOR.
Ventilation:MECHANICAL: MUST BE SPECIFICALLY APPROVED FOR USE WITH
REACTIVE, COMBUSTIBLE DUST.
Protective Gloves:MANDATORY
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SYNTHETIC FABRICS CAPABLE OF ACCUMULATING
STATIC CHARGE SHOULDN'T BE WORN. STATIC GROUNDING DEVICES MUST BE
WORN.
Supplemental Safety and Health

Melt/Freeze Pt:M.P/F.P Text:250C
Spec Gravity:5
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVERY-WHITE POWDER; ODORLESS

Stability Indicator/Materials to Avoid:YES
WILL REACT W/MOISTURE MINERAL ACIDS/HALOGENATED CPDS/HARSH
ALKALIS/MATERIALS CAPABLE OF CAUSING SPARKS/STRONG STATIC.
Stability Condition to Avoid:TEMPERATURES ABOVE IGNITION.
Hazardous Decomposition Products:NONE

Waste Disposal Methods:FOR DISPOSAL OF THIS MATERIAL AS WASTE, MIX
W/INERT INGREDIENT (SAND) IN 1:1 RATIO/DISPOSE OF IN ACCORDANCE
WITH METHODS OUTLINED BELOW, & FEDERAL, STATE, & LOCAL REGULATIONS.
DISPOSAL MAY ALSO BE BY REACTION OF CONTROLLED QUANTITIES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.