BHMCR - ENAMEL AEROSOL SPRAY PAINT RED 11136
- MSDS: BHMCR
- Manufacturer: PLASTI KOTE CO INC
- Product Name: ENAMEL AEROSOL SPRAY PAINT RED 11136
- National Stock Number: 8010-00-079-3760
Product Identification
Product ID:ENAMEL AEROSOL SPRAY PAINT RED 11136
MSDS Date:12/30/1986
FSC:8010
NIIN:00-079-3760
MSDS Number: BHMCR
Responsible Party
MEDINA, OH 44256
US
Emergency Phone: (216) 725-4511
Info Phone: (216) 725-4511
Cage: HO182
Contractor
Telephone: 330-725-4511
Cage: 07708
Ingredients
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 30-40%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 5-10%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)
CAS: 123-42-2
RTECS: SA9100000
Fraction By Weight: 5-6%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM; 9192
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 5 - 10%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING & INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.
Effects of Overexposure:INHALING CAN CAUSE NASAL & RESPIRATORY
IRRITATION, DIZZINESS, WEAKNESS, FATIGUE,NAUSEA, HEADACHE, POSSIBLE
UNCONSCIOUSNESS AND EVEN ASPHYXIATION. EYE CONTACT CAN CAUSE
SEVERE IRRITATION, REDNESS, TE ARING, BLURRED VISION. SWALLOWING
CANCAUSE GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING,
DIARRHEA.SKIN IRRITANT.
Medical Cond Aggravated by Exposure:CAN CAUSE ALLERGIC RESPIRATORY
AND/OR SKIN REACTION.
First Aid
First Aid:INHALED:REMOVE TO FRESH AIR. GIVE CPR AND OXYGEN IF
NECESSARY. SEEK MED. HELP. EYES: FLUSH WITH WATER FOR 15 MINUTES
WHILE OCCASSIONALLY HOLDING EYELIDS OPEN. GET MED. ATTN. IF
SWALLOWED: DO NOT INDU CE VOMITING. KEEP PERSON WARM, QUIET, &GET
MEDICAL ATTENTION/POISON CONTROL CENTER. IN ON SKIN: WASH WITH SOAP
AND WATER OR VARIOUS HAND CLEANERS, AND WASH CLOTHING BEFORE
RE-USE.
Fire Fighting
Flash Point:NR
Lower Limits:1.0
Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, BUT MAY BE
USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG NOZZLES ARE
PREFERRED. USE S.C.B.A. WITH FULL FACE PIECE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE AND/OR
AUTOIGNITE WHEN EXPOSED TO EXTREME HEAT. VAPORS ARE HEAVIER THAN
AIR & MAY TRAVEL/BE MOVED BY VENTILATION TO IGNITION SRC
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSOR- BENT, OR
OTHER ABSORBENT MATERIAL AND TRANSFER TO A CLOSED CONTAINER.
Handling
Handling and Storage Precautions:DO NOT STORE IN AREAS ABOVE 120F OR IN
DIRECT SUN-LIGHT OR NEAR HEAT OR OPEN FLAMES. DO NOT PUNCTUREOR
INCINERATE.
Exposure Controls
Respiratory Protection:FOR CASUAL/OCCASSIONAL USE-OPEN WINDOWS AND
DOORS OR USE OTHER MEANS TO ENSURE FRESH AIR ENTRY DURING
APPLICATION AND DRYING. IF OVEREXPOSURE SYMPTOMS OCCUR, WEAR
NIOSH/MSHA RESPIRATORY PROTECTION O R LEAVE THE AREA.
Ventilation:FOR REGULAR/CONTINUOUS USE-PROVIDE SUFFICIENT MECHANICAL
AND/OR LOCAL EXHAUST VENTILATION.
Protective Gloves:CHEMICAL RESISTANT GLOVES/NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLES
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM. AS
WITH ALL CHEMICALS, MINIMIZE PERSONAL CONTACT AND BREATHING OF
VAPORS
Supplemental Safety and Health
NK
Chemical Properties
HCC:V3
Boiling Pt:B.P. Text:133 - 331F
Melt/Freeze Pt:M.P/F.P Text:MIN. 1500F
Vapor Density:> AIR
Spec Gravity:< 1
Evaporation Rate & Reference:SECT.1 PROD.>1/PROPELNT<1
Solubility in Water:SLIGHT TO MODERATE
Percent Volatiles by Volume:85-90
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS AND HEAT.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAME.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
DIOXIDE/CARBON MONOXIDE, VARIOUS HYDROCARBONS, NITROGEN
COMPOUNDS, ETC. WHEN BURNED.
Disposal
Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULA- TIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.