BHNVD - BET

Product Identification

Product ID:BET
MSDS Date:09/01/1986
FSC:8030
NIIN:00N010561
MSDS Number: BHNVD

Responsible Party
STATE CHEMICAL MANUFACTURING CO
3100 HAMILTON AVENUE
CLEVELAND, OH 44114

Emergency Phone: 216-861-7114

Info Phone: 216-861-7114

Cage: 53798

Contractor
STATE CHEMICAL MANUFACTURING CO.
CLEVELAND, OH 44114-3701 US

Telephone: 216-861-7114

Cage: 53798

Ingredients

HEXANE (N-HEXANE)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: <10%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: <10%

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:OVEREXPOSURE TO THIS MATERIAL OR ITS
COMPONENTS HAS BEEN SUGGESTED AS A CAUSE OF LIVER
ABNORMALITIES,KIDNEY DAMAGE AND LUNG DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN:DIRECT CONTACT MAY CAUSE
IRRITATION.INGESTION:HARMFUL OR FATAL IF SWALLOWED.INHALATION:VAPOR
HARMFUL.PROLONGED OVEREXPOSURE MAY RESULT IN
HEADACHE,DIZZINESS,DROWSINESS OR NAUSEA,NASAL AND RE SPIRATORY
IRRITATION.
Medical Cond Aggravated by Exposure:LIVER DISEASE AND RHYTHM DISORDERS
OF THE HEART.

First Aid

First Aid:EYES:FLUSH IMMEDIATELY WITH PLENTY OF COOL WATER FOR AT LEAST
15 MIN.IF IRRITATION PERSISTS,CONTACT MD.SKIN:WASH THOROUGHLY WITH
SOAP AND WATER.IF IRRITATION PERSISTS,CONTACT MD.INGESTION:DO NOT
INDUC E VOMITING BECAUSE OF ASPIRATION HAZARD.CONTACT MD
IMMEDIATELY.INHALATION:REMOVE TO FRESH AIR.SEEK MEDICAL ATTENTION
PROMPTLY.IF BREATHING HAS STOPPED,PERFORM ARTIFICIAL RESPIRATION.

Fire Fighting

Flash Point Method:TCC
Flash Point:-40F,-40C
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:WATER FOG,FOAM,CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR PRESSURE DEMAND SCBA AND FULL PROTECTIVE
EQUIPMENT .KEEP CANS COOL.USE SHIELDING TO PROTECT PERSONNEL
AGAINST BURSTING,RUPTURING OR VENTING CONTRS.
Unusual Fire/Explosion Hazard:THERM DECOMP PROD MAY INCLUDE HCL &
PHOSGENE .TEMP >120F,49C:CONTAINERS MAY VENT,RUPTURE OR
BURST.BURNING MAY RESULT IN FORMATION OF CARBON MONOXIDE.

Accidental Release

Spill Release Procedures:FLUSH WITH PLENTY OF WATER.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:CAUT:CONTENTS UNDER PRESS.DO NOT
PUNCTURE OR INCIN CANS.DO NOT STORE NEAR HEAT.READ & FOLLOW ALL
LABEL DIRECTIONS & PREC BEFORE USE.FOR INDUS USE ONLY
Other Precautions:NO SMKG IN AREA OF USE.DO NOT USE IN GENERAL VICIN OF
ARC WELDING,OPEN FLAMES OR HOT SURFACES.HEAT &/OR UV RADIA MAY
CAUSE FORM OF HCL &/OR PHOSGENE .NOTE:STAND WELL BACK (KEEP HANDS &
CLTHG AWA Y) FROM MOVING MACHINERY.(SEE SUPP DATA)

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:VITON
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Work Hygienic Practices:N/K
Supplemental Safety and Health
OTHER PREC:EXAMINE BELTS FOR WORN SPOTS,FLAWS OR DETERIORATION,REPLACE
IF NECESSARY.RESTORATION OF PULLING POWER COULD CAUSE WORN-OUT
BELTS TO BREAK.KEEP OUT OF THE REACH OF CHILDREN.% VOLATILES BY WE
IGHT:>90.

Chemical Properties

Boiling Pt:B.P. Text:10-212F
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:31 PSIG
Vapor Density:4.0,AIR=1
Spec Gravity:0.9 (WATER=1)
Evaporation Rate & Reference:N/K
Solubility in Water:COMPLETE
Appearance and Odor:WHITISH AEROSOL SPRAY WITH A MILD ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
PURE OXYGEN,STRONG OXIDIZERS AND CHEMICALLY ACTIVE LIGHT METALS SUCH AS
ALUMINUM,LITHIUM AND SODIUM.
Stability Condition to Avoid:EXPOSURE TO TEMPERATURES >120F,49C.
Hazardous Decomposition Products:HCL,PHOSGENE .BURNING MAY RESULT IN
FORMATION OF CARBON MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT PUNCTURE OR INCINERATE
CANS.GIVE CONTAINERS TO A DISPOSAL SERVICE EQUIPPED TO SAFELY
HANDLE AND DISPOSE OF PRESSUR IZED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.