Product ID:OGL
MSDS Date:04/01/1987
FSC:9150
NIIN:00N010572
MSDS Number: BHNVM

STATE CHEMICAL MANUFACTURING CO

3100 HAMILTON AVENUE
CLEVELAND, OH 44114

Emergency Phone: 216-861-7114

Info Phone: 216-861-7114

Cage: 53798

STATE CHEMICAL MANUFACTURING CO.

CLEVELAND, OH 44114-3701 US

Telephone: 216-861-7114

Cage: 53798

PERCHLOROETHYLENE (TETRACHLOROETHYLENE) (SARA III)

CAS: 127-18-4

RTECS: KX3850000

Fraction By Weight: <25%

OSHA PEL 100 PPM

ACGIH TLV: 25PPM/100,A3 STEL;94

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: <1%

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:PERCHLOROETHYLENE:INADEQUATE EVIDENCE
FOR CARCINOGENICITY IN HUMANS,SUFFICIENT EVIDENCE FOR CARC IN
ANIMALS (IARC 1987).
Effects of Overexposure:EYES:DIRECT CONTACT MAY RESULT IN
IRRITATION.SKIN:PROLONGED CONTACT MAY RESULT IN
IRRITATION.INGESTION:DANGER:HARMFUL OR FATAL IF SWALLOWED.CONTAINS
PETROLEUM DISTILLATES.INHALATION:OVEREXPOSURE MAY C AUSE
HEADACHE,NAUSEA,DIZZINESS,NASAL & RESPIRATORY IRRITATION.
Medical Cond Aggravated by Exposure:LIVER DISEASE AND RHYTHM DISORDERS
OF HEART.

First Aid:EYES:FLUSH IMMED W/ PLENTY OF COOL WATER FOR AT LEAST 15
MIN.DO NOT WEAR CONTACT LENSES WHILE WORKING W/ PRODUCT.SKIN:WASH
THOROUGHLY W/ PLENTY OF SOAP & WATER.IF IRRIT DEVELOPS,CONTACT
MD.INGEST:DO N OT INDUCE VOMITING.CONTACT MD OR POISONCONTROL
CENTER IMMED.CONTAINS PETROLEUM DISTILLATES.INHAL:AVOID BRTHG
VAP.MOVE TO FRESH AIR.IF IRRITATION OR DIFFICULTY IN BREATHING
PERSISTS,CONTACT MD.

Flash Point Method:TOC
Flash Point:<20F,-6.7C
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:CARBON DIOXIDE,WATER-FOG,FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR PRESSURE DEMAND SCBA AND FULL PROTECTIVE
EQUIPMENT .KEEP CONTRS COOL.USE SHIELDING TO PROTECT PERSONNEL
AGAINST BURSTING,VENTING OR RUPTURING CONTRS.
Unusual Fire/Explosion Hazard:THERM DECOMP PROD MAY INCLUDE HCL &
PHOSGENE .BURNING MAY ALSO LEAD TO FORM OF CO*2 & CO.EXPOS TO TEMP
>120F,49C MAY CAUSE CANS TO VENT,RUPTURE OR BURST.

Spill Release Procedures:REMOVE ALL SOURCES OF HEAT,SPARKS OR OPEN
FLAMES.VENTILATE AREA OF SPILL.ABSORB ON SAND,VERMICULITE,ETC.FLUSH
ANY RESIDUES WITH PLENTY OF WATER.
Neutralizing Agent:N/K

Handling and Storage Precautions:EXTREMELY FLAM.CONTENTS UNDER
PRESS.STORE AWAY FROM HEAT,SPARKS,OPEN FLAMES OR TEMP >120F,49C AS
IN STRONG SUNLIGHT.DO NOT PUNCTURE OR INCIN (SEE SUP)
Other Precautions:NO SMKNG IN AREA OF USE.DO NOT USE IN GENRL VICIN OF
ARC WELDING,OPEN FLAMES OR HOT SURFACES.HEAT &/OR UV RADIA MAY
CAUSE FORM OF HCL &/OR PHOSGENE .READ & FOLLOW ALL LABEL DIRECTIONS
& PREC BEF ORE USE.KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:USE ONLY WITH LOCAL MECHANICAL VENTILATION.
Protective Gloves:VITON
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:HAVE A SOURCE OF COOL,CLEAN WATER NEARBY IN
CASE OF ACCIDENTAL EYE CONTACT.
Work Hygienic Practices:N/K
Supplemental Safety and Health
HNDLG/STOR PREC:CONTAINERS.MAY ATTACK SOME PLASTICS,RUBBER,POLYMERIC
FIBERS & COATINGS.PRIOR SURFACE TESTING IS
RECOMMENDED.DANGER:POSSIBLY HARMFUL/FATAL IF INGESTED.AVOID
EYE/SKIN CONTACT.FOR INDUSTR IAL & INSTITUTIONAL USE ONLY.NOT FOR
HOUSEHOLD USE OR RESALE.

Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Evaporation Rate & Reference:N/K
Solubility in Water:<1%
Appearance and Odor:A BLACK AEROSOL WITH A SOLVENT ODOR.

Stability Indicator/Materials to Avoid:YES
PURE O*2,CHEMICALLY ACTIVE LIGHT METALS SUCH AS LITHIUM OR
SODIUM,STRONG OXIDIZERS & STRONG CAUSTICS.SOME PLASTICS.
Stability Condition to Avoid:AVOID EXPOSURE TO HEAT,SPARKS AND OPEN
FLAME.
Hazardous Decomposition Products:HCL,PHOSGENE .BURNING MAY ALSO LEAD TO
FORMATION OF CARBON DIOXIDE OR CARBON MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT PUNCTURE OR INCINERATE
CANS.WRAP CANS AND PUT IN TRASH COLLECTION.LIQUID IN CANS IS A RCRA
HAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.