Product ID:NIXIT
MSDS Date:01/01/1987
FSC:8010
NIIN:00N011053
MSDS Number: BHPDT

GARON PRODUCTS, INC.

RARITAN CENTER, WOODBRIDGE AVENUE
EDISON, NJ 08817

Emergency Phone: 201-449-1776

Info Phone: 201-449-1776

Cage: EO138

GARON PRODUCTS, INC.

WALL, NJ 07719 US

Telephone: 908-449-1776

Cage: EO138

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 89%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYL ALCOHOL (METHANOL) (SARA III)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 5%

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF OVEREXPOSURE
Explanation of Carcinogenicity:METHYLENE CHLORIDE: ACGIH-SUSPECTED
HUMAN CARCINOGEN (A2), IARC-ANIMAL CARCINOGENS SOURCE LIST 9G.
Effects of Overexposure:DIZZINESS (THE REMOVER SHOULD NOT BE USED
WITHOUT VENTILATION AND IN CLOSED AREAS).
Medical Cond Aggravated by Exposure:N/K

First Aid:IN CASE OF OVEREXPOSURE CALL POISON CONTROL CENTER. EYES:
FLUSH WITH PLENTY OF POTABLE WATER FOR AT LEAST 15 MINUTES, THEN
OBTAIN PROMPT MEDICAL ATTENTION . SKIN: WASH WITH WATER. INHAL:
REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTIFICIAL
RESPIRATION) . INGEST: CALL MD IMMEDIATELY .

Flash Point Method:OC
Flash Point:NONE TO BOILING
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:WATER
Fire Fighting Procedures:NORMAL (MFR). WEAR NIOSH/MSHA APPROVED
PRESSURE DEMAND SELF-CONTAINED BREATHING APPARATUS AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:IF THE PAINT REMOVER COMES IN DIRECT
CONTACT WITH OPEN FLAME, TOXIC GASES WILL OCCUR. THERMAL DECOMP
PRODUCTS MAY INCLUDE HCL AND PHOSGENE .

Spill Release Procedures:WASH WITH WATER (MFR)
Neutralizing Agent:N/K

Handling and Storage Precautions:STORE IN COOL PLACE
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE INTHE GENERAL
VICINITY OF ARC WELDING, OPEN FLAMES OR HOT SURFACES. HEAT AND/OR
UVRADIATION MAY CAUSE THE FORMATION OF HCLAND/OR PHOSGENE .

Respiratory Protection:FRESH AIR VENTILATION (MFR). NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST, MECHANICAL (MFR). CONSULTLOCAL SAFETY/HEALTH
AUTHORITIES IF ADDITIONAL GUIDANCE IS NECESSARY .
Protective Gloves:IF POSSIBLE (MFR). IMPERVIOUS
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:N/K
Work Hygienic Practices:OBSERVE GOOD WORK HYGIENIC PRACTICES
Supplemental Safety and Health
MSDS PREP/REVISED: PRODUCT DISCONTINUED AS OF 30 MARCH 1988 (MFR).

Boiling Pt:B.P. Text:104 F; 40 C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:4.28
Vapor Density:2.93
Spec Gravity:N/K
Evaporation Rate & Reference:N/K
Solubility in Water:MODERATE
Appearance and Odor:LIGHT UMBER COLOR, VISCOUS, AROMATIC SMELL

Stability Indicator/Materials to Avoid:YES
N/K
Stability Condition to Avoid:NEVER USE NEAR OPEN FLAME, TOXIC GASES
WILL OCCUR. NEVER USE IN CLOSED AREAS.
Hazardous Decomposition Products:MANUFACTURE CITES NONE. HCL, PHOSGENE
Conditions to Avoid Polymerization:AVOID PROLONGED BREATHING OF VAPOR
OR CONTACT WITH SKIN OR EYES.

Waste Disposal Methods:WILL EVAPORATE, ONLY 5% SOLIDS, MAINLY CELLULOSE
(MFR). DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.