BHQDG - ACI-TECH

  • MSDS: BHQDG
  • Manufacturer: CANTOL INC
  • Product Name: ACI-TECH
  • National Stock Number: 6850-01-311-8189
Product Identification

Product ID:ACI-TECH
MSDS Date:07/31/1991
FSC:6850
NIIN:01-311-8189
MSDS Number: BHQDG

Responsible Party
CANTOL, INC
2211 NORTH AMERICAN STREET
PHILADELPHIA, PA 19133
US

Emergency Phone: 215-425-1966

Info Phone: 215-425-1966

Preparer: RICHARD J. PETSCHE

Cage: DO103

Contractor
CANTOL,INC.
PHILADELPHIA, PA 19133-3306 US

Telephone: 215-425-1966

Cage: 58380

Ingredients

HYDROGEN CHLORIDE (HYDROCHLORIC ACID) (SARA III)

CAS: 7647-01-0

RTECS: MW4025000

Fraction By Weight: 9.6% %

OSHA PEL C 5 PPM

ACGIH TLV: C 5 PPM; 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


PHOSPHORIC ACID (SARA III)

CAS: 7664-38-2

RTECS: TB6300000

Fraction By Weight: 12.0%

OSHA PEL 1 MG/M3/3 STEL

ACGIH TLV: 1 MG/M3/3 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2-BUTOXYETHANOL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 5.0%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293


NONYLPHENOXYETHANOL

CAS: 68412-54-4

Fraction By Weight: >1.0%


OTHER COMPONENTS

Fraction By Weight: BALANCE

Hazards

LD50 LC50 Mixture:TLV 5 PPM (HYDROGEN CHLORIDE)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CORROSIVE TO EYES AND SKIN.
HARMFUL IF INHALED. HARMFUL IF SWALLOWED. HARMFUL IF ABSORBED
THROUGH THE SKIN. CHRONIC: ABSORTION OVER LONG TERM EXPOSURE MAY
CAUSE INJURY TO LIVER AND KIDNEYS.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:EYES: BURNING, PAIN. SKIN: REDNESS, BURNING.
INHALATION: IRRITANT TO NOSE AND THROAT. INGESTION: PAIN,
IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
WARM AND QUIET. GET MEDICAL ATTENTION. SKIN: WASH AFFECTED AREA
THOROUGHLY WITH SOAP AND WATER. GET MEDICAL ATTENTION. EYES: FLUSH
WITH LARGE AMOUNTS OF WATER FOR 15 MINUTES. GET MEDICAL ATTENTION.
INGESTION: DO NOT INDUCE VOMITING. DRINK LARGE QUANTITIES OF WATER.
CALL A PHYSICIAN IMMEDIATELY.

Fire Fighting

Flash Point Method:TCC
Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:NONFLAMMABLE. USE MEDIA SUITABLE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WATER SOLUTIONS ARE HIGHLY ACIDIC. WEAR FULL
PROTECTIVE EQUIPMENT. KEEP CONTAINERS COOL TO PREVENT FUMING.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.

Accidental Release

Spill Release Procedures:VENTILATE AREA. SOAK UP SPILL WITH OIL
ABSORBENT. FLUSH ANY RESIDUE WITH PLENTY OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID PROLONGED AND REPEATED BREATHING
OF VAPOR. DO NOT GET IN EYES, ON SKIN, ON CLOTHING. STORE IN COOL
AREA. KEEP FROM FREEZING.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. FOR INDUSTRIAL AND
INSTITUTIONAL USE ONLY. READ AND FOLLOW ALL LABEL DIRECTIONS AND
PRECAUTIONS. DO NOT MIX WITH ANY OTHER CHEMICALS.

Exposure Controls

Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION TO
MAINTAIN EXPOSURE LEVELS.
Protective Gloves:RUBBER, NEOPRENE, PLASTIC
Eye Protection:EYE GOGGLES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:C1
Boiling Pt:B.P. Text:190F,88C
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:> 1
Spec Gravity:1.114
pH:< 2
Evaporation Rate & Reference:> 1 (BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR YELLOW LIQUID WITH A MILD ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALI
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BURNING MAY YIELD CARBON MONOXIDE AND
CARBON DIOXIDE, SULFUR DIOXIDE, HYDROGEN SULFIDE, PHOSPHORUS OXIDE
FUMES.

Disposal

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.