Product ID:SHELL MP GREASE;SHELL CODE:71482
MSDS Date:02/14/1990
FSC:4930
NIIN:00-990-2154
MSDS Number: BHQDY

SHELL OIL COMPANY

HEALTH, SAFETY AND ENVIRONMENT
HOUSTON, TX 77210
US

Emergency Phone: 713-473-9461

Info Phone: 713-241-4819

Preparer: J.C.WILLETT

Cage: 54527

SHELL OIL COMPANY

2463 HOUSTON, TX 77210 US

Telephone: 800-231-6950

Cage: 54527

HYDROTREATED HEAVY NAPHTHENIC DISTILLATE, PETROLEUM

CAS: 64742-52-5

RTECS: PY8035000

Fraction By Weight: 50-60%

RESIDUAL OILS, HYDROTREATED

CAS: 64742-57-0

Fraction By Weight: 25-30%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

LITHIUM 12 HYDROXYSTEARATE

CAS: 7620-77-1

Fraction By Weight: 10.0%

SULFURIZED FATTY MATERIAL

CAS: 61790-49-6

Fraction By Weight: 7.0%

NAPHTHENIC ACID; LEAD SALT

CAS: 61790-14-5

RTECS: QK9150000

Fraction By Weight: 2.5%

LD50 LC50 Mixture:LD50 (ORAL RAT) >15 ML/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE:MAY BE MILDLY IRRITATING.
SKIN:RELEASE DURING HIGH PRESSURE USAGE MAY RESULT IN INJECTION OF
OIL INTO THE SKIN CAUSING LOCAL NECROSIS. INHALATION:NOT EXPECTED
TO BE A RELEVANT ROUTE OF EXPO SURE; HIGH TEMPERATURE VAPORS
IRRITATE RESPIRATORY TRACT. INGESTION:LOW LEVEL OF TOXICITY.
CHRONIC: SKIN DISORDERS.
Explanation of Carcinogenicity:DATA PER MSDS
Effects of Overexposure:MAY CAUSE EYE, SKIN & RESPIRATORY TRACT
IRRITATION. LOCAL NECROSIS IS EVIDENCED BY DELAYED ONSET OF PAIN
AND TISSUE DAMAGE A FEW HOURS FOLLOWING INJECTION.LEAD ABSORPTION
MAY RESULT ON CONTACT WITH SK IN OR INGESTION.PER MSDS,NO REPORTS
OF LEAD TOXICITY HAVE BEEN ASSOCIATED WITH THIS PRODUCT.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN DISORDERS MAY BE
AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN IF BREATHING IS
DIFFICULT. GET MEDICAL ATTENTION. EYE: FLUSH WITH WATER FOR 15
MINUTES WHILE HOLDING EYELIDS OPEN. GET MEDICAL ATTENTION. SKIN:
WASH WITH S OAP & WATER/WATERLESS CLEANER. REMOVE CONTAMINATED
CLOTHING. IF IRRITATION PERSISTS, GET MEDICAL ATTENTION. INGESTION:
DO NOT INDUCE VOMITING. IN GENERAL, NO TREATMENT IS REQUIRED. GET
MEDICAL ADVICE.

Flash Point Method:PMCC
Flash Point:430F,221C
Extinguishing Media:USE CARBON DIOXIDE, FOAM, DRY CHEMICAL, OR WATER
FOG.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.SULFUR OXIDES AND
HYDROGEN SULFIDE

Spill Release Procedures:SCOOP UP EXCESS GREASE. CLEAN AREA WITH
APPROPRIATE CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE WITH
ADEQUATE VENTILATION. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN
USE. KEEP AWAY FROM OPEN FLAMES & HIGH TEMPERATURES.
Other Precautions:MINIMIZE SKIN CONTACT. WASH WITH SOAP & WATER BEFORE
EATING, DRINKING, SMOKING OR USING TOILET FACILITIES. LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE. PROPERLY DISPOSE OF
CONTAMINATED LEATHER ARTICLES (SHOES) THAT CAN NOT BE
DECONTAMINATED.

Respiratory Protection:IF VENTILATION DOES NOT MAINTAIN INHALATION
EXPOSURES BELOW PEL(TLV), USE NIOSH/MSHA APPROVED RESPIRATORS AS
PER CURRENT 29 CFR 1910.134, INSTRUCTIONS/WARNINGS. RESPIRATORY
PROTECTION NOT ORDINARILY R EQUIRED.
Ventilation:NORMAL ROOM VENTILATION
Protective Gloves:NEOPRENE RUBBER AS REQUIRED.
Eye Protection:SAFETY GLASSES RECOMMENDED.
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER.
INDUSTRIAL-TYPE WORK CLOTHING AND APRON AS REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
FOOTWEAR.
Supplemental Safety and Health
DO NOT GET IN EYES OR ON CLOTHING.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:351F,177C
Spec Gravity:7.5 PPG
Solubility in Water:NEGLIGBLE
Appearance and Odor:DARK BROWN,SMOOTH,SLIGHT ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:A MIXTURE OF AIRBORNE SOLID, LIQUID
PARTICULATES AND GASES (CO,OXIDES OF SULFUR AND LEAD OXIDES AND
OTHER UNIDENTIFIED C

Waste Disposal Methods:DISPOSE OF IN AN APPROPRIATE DISPOSAL FACILITY
IN COMPLIANCE WITH LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.