Product ID:EPK (EPS) 608, PART B
MSDS Date:12/19/1988
FSC:8040
NIIN:00-092-2816
Kit Part:Y
MSDS Number: BHQGV

THE DEXTER CORPORATION

ONE DEXTER DRIVE
SEABROOK, NH 03874
US

Emergency Phone: 603-474-5541

Info Phone: 603-926-0910

Preparer: KEN DECOSTA

Cage: 0KZ46

THE DEXTER CORPORATION

312 CHAGRIN FALLS, OH 44022 US

Telephone: 800-669-0053

Cage: 0KZ46

SILICA, AMORPHOUS*FILLER PARTICLES ARE THOROUGHLY WETTED BY

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 20 MPPCF

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

2,4,6-TRI(DIMETHYLAMINOMETHYL) PHENOL

CAS: 90-72-2

RTECS: SN3500000

LD50 LC50 Mixture:NO
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC REACTIONS. PROLONGED/REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.
Effects of Overexposure:SKIN RASH, MAY CAUSE SKIN IRRITAITON AND
POSSIBLE ALLERGIC REACTIONS. PROLONG AND REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH SKIN
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND EASH BEFORE REUSE. IF
IRRITA TION PERSISTS, SEE PHYSICIAN.

Flash Point Method:COC
Flash Point:315F/157C
Extinguishing Media:DRY CHEMICAL, HALON FIRE EXTINGUISHER, WATER SPRAY,
FOAM OR FOG
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASSES MAY BE
LIBERATED

Spill Release Procedures:SCRAPE UP AND TRANSFER TO METAL CONTAINER.
WIPE UPREMAINING RESIDUE WITH SOLVENTS, OBSERVING
SOLVENTFLAMMABILITY CAUTIONS, OR USE DETERGENT.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE. FAILURE TO
OBSERVE CAUTIONS MAY RESULT IN EXCESSIVE HEAT BUILD UP WITH THE
RELEASE OF TOXIC GASSES.

Respiratory Protection:NOT REQUIRED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUSTE RECOMMENDED, MECHANICAL ACCEPTABLE
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER
Eye Protection:SAFETY GLASSES OR GOGGLEES
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING
Supplemental Safety and Health
NK

HCC:N1
Boiling Pt:B.P. Text:>600F
Vapor Pres:<0.01
Vapor Density:9
Spec Gravity:>1
Evaporation Rate & Reference:<0.01
Solubility in Water:NIL
Appearance and Odor:AMBER, HIGH VISCOSITY LIQUID, SULFURIC ODOR
Percent Volatiles by Volume:NA

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS
Conditions to Avoid Polymerization:AVOID MIXING RESINS AND CURING AGENT
IN BATCHES >1 LB. DON'THEAT MATL UNLESS CURING SUFACES TO BE
BONDED. CONTS.

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT DISPOSE OF AS ORM-E. DISPOSAL
METHOD CAN BE LAND BURIAL OR CHEMICAL INCINERATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.