Product ID:7002AC
MSDS Date:02/23/1988
FSC:8040
NIIN:00-092-2816
MSDS Number: BHQRR

DEXTER CORPORATION

2850 WILLOW PASS ROAD
PITTSBURG, CA 94565

Emergency Phone: (415) 687-4201

Info Phone: (415) 687-4201

Cage: 79436

DEXTER CORPORATION ADHESIVE & COATING SYSTEMS

312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

EPOXY RESIN SYSTEM

SILICA, AMORPHOUS, DUST

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <20%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3; 8990

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 05%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

2,4,6-TRI(DIMETHYLAMINOETHYL)PHENOL, DMP-30

CAS: 90-72-2

RTECS: SN3500000

Fraction By Weight: <10%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION/DERMATITIS. EYES;
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION, POSSIBLE ALLERGIC REACTIONS,
SENSITIZATION, DERMATITIS & RASH. EYES: IRRITATION.
Medical Cond Aggravated by Exposure:POSSIBLE ALLERGIC REACTIONS,
SENSITIZATION & RASH.

First Aid:EYE: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. SKIN:
WASH W/SOAP & WATER, RUBBING ALCOHOL/HAND CLEANER. DON'T USE
SOLVENTS. REMOVE/WASH SOILED CLOTHING BEFORE REUSE. SEE PHYSICIAN.

Flash Point Method:COC
Flash Point:315F,157C
Extinguishing Media:DRY CHEMICAL/HALON FIRE EXTINGUISHER, WATER SPRAY,
FOAM/FOG
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE & TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING. SCRAPE UP & TRANSFER
TO METAL CONTAINER. WIPE UP REMAINING RESIDUE W/SOLVENTS, OBSERVING
SOLVENT FLAMMABILITY CAUTIONS.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE W/LABEL
INSTUCTIONS. STORE AT ROOM TEMPERATURE 70F FOR 12 MONTHS. FOLLOW
RECOMMENDED CURING SCHEDULE.
Other Precautions:WASH THOROUGHLY AFTER HANDLING. DON'T HANDLE/USE
UNTIL THE MSDS HAS BEEN READ & UNDERSTOOD.

Respiratory Protection:NOT NEEDED W/GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST: RECOMMENDED
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:AS NEEDED TO PROTECT SKIN & CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. REMOVE/WASH
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

HCC:V7
Boiling Pt:B.P. Text:>600F
Vapor Pres:<0.01
Vapor Density:9.0
Spec Gravity:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:AMBER, HIGH VISCOSITY LIQUID, SULFURIC ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, LEWIS/MINERAL ACIDS.
Stability Condition to Avoid:AVOID MIXING RESIN & CURING AGENT IN
BATCHES >1 LB TOTAL. DON'T HEAT MIXED ADHESIVE UNLESS CURING
SURFACES TO BE BONDED.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS &
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:FAILURE TO OBSERVE CAUTION MAY
RESULT IN EXCESSIVE HEAT.

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.