BHQSZ - LEAK LOCK PIPE JOINT COMPOUND
- MSDS: BHQSZ
- Manufacturer: HIGHSIDE CHEMICALS INC
- Product Name: LEAK LOCK PIPE JOINT COMPOUND
- National Stock Number: 8030-00-435-8004
Product Identification
Product ID:LEAK LOCK PIPE JOINT COMPOUND
MSDS Date:06/26/1989
FSC:8030
NIIN:00-435-8004
MSDS Number: BHQSZ
Responsible Party
US
Emergency Phone: 601-896-5895
Info Phone: 601-896-9220
Cage: 08589
Contractor
Telephone: 601-896-9220
Cage: 08589
Ingredients
INDUSTRIAL DENATURED ETHANOL(20% OF PRODUCT) (INGRED
Fraction By Weight: 20% OF *
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 85% OF *
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:EYE: CAN CAUSE IRRITATION, REDNESS,
TEARING OR BLURRED VISION. SKIN: CAN CAUSE SLIGHT IRRITATION.
INHALATION: CAN CAUSE NASAL AND RESPIRATORY IRRITATION. INGESTION:
NON-TOXIC.
First Aid
First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. GET MEDICAL AID.
SKIN; WASH THOROUGHLY WITH SOAP AND WATER. INHALATION: REMOVE
INDIVIDUAL TO FRESH AIR. VAPORS. INGESTION: NON-TOXIC.
Fire Fighting
Flash Point:73.0F,22.8C
Extinguishing Media:WATER FOG, CARBON DIOXIDE OR DRY CHEMICAL
Fire Fighting Procedures:TREAT AS ALCOHOL FIRE
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR AND MAY
TRAVEL ALONG THE GROUND OR BE MOVED BY VENTILATION AND IGNITED AT
LOCATIONS DISTANT FROM MATERIAL HANDLING POINT.
Accidental Release
Spill Release Procedures:NO ABNORMAL PRECAUTIONS ARE NECESSARY FOR
THOROUGH CLEAN-UP. MATERIAL IS SOLUBLE IN ALCOHOL OR SOLUTIONS OF
CAUSTIC SODA.
Exposure Controls
Supplemental Safety and Health
Chemical Properties
HCC:F5
Boiling Pt:B.P. Text:NA
Vapor Pres:ND
Vapor Density:1.6
Spec Gravity:1.3 +/-.1
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE
Appearance and Odor:BLUE FLOWABLE PASTE, ODORLESS
Percent Volatiles by Volume:20+/-
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS; CARBON
DIOXIDE AND CARBON MONOXIDE.
Conditions to Avoid Polymerization:AVOID CONTACT WITH STRONG OXIDIZING
AGENTS.
Disposal
Waste Disposal Methods:MATERIAL CAN BE DISPOSED OF IN LANDFILL IN
ACCORDANCE WITH APPLICABLE REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.