BHSJQ - ADJUST

Product Identification

Product ID:ADJUST
MSDS Date:01/22/1988
FSC:6520
NIIN:00F010334
MSDS Number: BHSJQ

Responsible Party
E & D DENTAL MANFUACTURING CO.
6 HOFFMAN PLACE
HILLSIDE, NJ 07205

Emergency Phone: (201) 372-1298

Info Phone: (201) 372-1298

Cage: OB7F7

Contractor
E & D DENTAL MANUFACTURING
HILLSIDE, NJ 07205

Telephone: (201) 372-1298

Cage: OB7F7

Ingredients

ALKYL METHACRYLATE

Fraction By Weight: >95%

ACGIH TLV: 100 PPM


N,N-DIMETHYL-P-TOLUIDINE

CAS: 99-97-8

RTECS: XU5803000

Fraction By Weight: <2%


HYDROQUINONE (SARA III)

CAS: 123-31-9

RTECS: MX3500000

Fraction By Weight: 0.001%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF EYES &
RESPIRATORY SYSTEM, HEADACHES, NAUSEA, DROWSINESS, &
UNCONSCIOUSNESS. SKIN: RASHES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION OF EYES & RESPIRATORY
SYSTEM, HEADACHE, NAUSEA, DROWSINESS, & UNCONSCIOUSNESS.
Medical Cond Aggravated by Exposure:SKIN RASH

First Aid

First Aid:INHALATION: MOVE TO FRESH AIR. ADMINISTER OXYGEN, GIVE
ARTIFICIAL RESPIRATION. EYES: FLUSH WITH WATER FOR 15 MINS. CALL
PHYSICIAN. SKIN: WASH WITH SOAP & WATER. INGESTION: INDUCE VOMITING
& GET PROMPT MEDICAL ATTENTION

Fire Fighting

Flash Point Method:TCC
Flash Point:51C
Lower Limits:2%
Upper Limits:8%
Extinguishing Media:CHEMICAL FOAM, CO2, DRY CHEMICALS
Fire Fighting Procedures:WEAR RESPIRATOR (PRESSURE DEMAND, SCBA,
MSHA/NIOSH APPROVED OR EQUIVALENT) & FULL PROTECTIVE GEAR. USE
WATER SPRAY TO COOL CONTAINERS.
Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL TO SOURCE OF IGNITION &
FLASH BACK. HEAT CAN CAUSE POLYMERIZATION W/RAPID RELEASE OF ENERGY
WHICH MAY RUPTURE CONTAINER EXPLOSIVELY.

Accidental Release

Spill Release Procedures:EVACUATE AREA, ELIMINATE IGNITION SOURCES,
WEAR RESPIRATOR & PROTECTIVE CLOTHING.

Handling

Handling and Storage Precautions:GROUND ALL CONTAINERS WHEN
TRANSFERRING. USE EXPLOSION-PROOF EQUIPMENT.
Other Precautions:ROUTINE FOR FLAMMABLE LIQUIDS. WASH PROTECTIVE
CLOTHING, HANDS & FACES WHEN FINISHED.

Exposure Controls

Respiratory Protection:SELF CONTAINED BREATHING APPARATUS (SCOTT AIR
PACK)
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP <100 PPM
Protective Gloves:IMPERVIOUS, NEOPRENE
Eye Protection:SPLASH PROOF GOGGLES
Other Protective Equipment:PROVIDE EYEWASH & SAFETY SHOWERS.
Work Hygienic Practices:WASH PROTECTIVE CLOTHINGS, HANDS & FACE WHEN
FINISHED.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:163C
Vapor Pres:2
Vapor Density:4.9
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, LIGHT BLUE, OILY LIQUID, ACRID, FRUITY ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
REDUCING & OXIDIZING AGENT & UV LIGHT.
Stability Condition to Avoid:IGNITION SOURCES, AGING, CONTAMINATION,
TEMPERATURES >40C.
Hazardous Decomposition Products:OXIDES OF CARBON
Conditions to Avoid Polymerization:EXCESSIVE HEAT, OXIDIZING OR
REDUCING AGENTS, PEROXIDES, & AMINES

Disposal

Waste Disposal Methods:DON'T ALLOW TO DRAIN TO SEWER. INCINERATE LIQUID
IN PROPER EQUIPMENT. LANDFILL ABSORBED MATERIAL PROPERLY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.