BHSKJ - A497,A498,A499,A500 FIBERGLASS RESIN
- MSDS: BHSKJ
- Manufacturer: FIBRE GLASS EVERCOAT CO
- Product Name: A497,A498,A499,A500 FIBERGLASS RESIN
- National Stock Number: 6850-00F010395
Product Identification
Product ID:A497,A498,A499,A500 FIBERGLASS RESIN
MSDS Date:01/29/1991
FSC:6850
NIIN:00F010395
MSDS Number: BHSKJ
Responsible Party
CINCINNATI, OH 45242-5000
US
Emergency Phone: 800-424-9300/800-729-7600
Info Phone: 800-729-7600/800-424-9300
Preparer: JEFF ZYCH
Cage: 18731
Contractor
Telephone: 513-489-7600
Cage: 18731
Ingredients
STYRENE, MONOMER (SARA III)
CAS: 100-42-5
RTECS: WL3675000
Fraction By Weight: <40%
OSHA PEL 100 PPM
ACGIH TLV: S,50PPM/100STEL;9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
POLYESTER RESIN
Fraction By Weight: 60%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: LIVER & KIDNEY DAMAGE,
NOSE, THROAT & RESPIRATORY TRACT IRRITATION. SKIN: DERMATITIS,
IRRITATION. EYES: IRRITATION.
Explanation of Carcinogenicity:IARC HAS CLASSED STYRENE AS A POSSIBLE
HUMAN CARCINOGEN (CLASS 2B).
Effects of Overexposure:IRRITATION, HEADACHE, NAUSEA, DEFATTING,
DRYNESS, TEARING, GI DISTURBANCES, PAIN, DISCOMFORT.
Medical Cond Aggravated by Exposure:LIVER & KIDNEY DISORDERS.
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15
MINUTES. INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NEEDED. INGESTION: DON'T INDUCE VOMITING. ASPIRATION HAZARD. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:CC
Flash Point:98F
Lower Limits:1.1
Upper Limits:6.1
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES SUCH AS A FIRE,
POLYMERIZATION MAY TAKE PLACE. IF CONTAINED, VIOLENT RUPTURE MAY
RESULT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. ABSORB SPILL
W/ABSORBENT MATERIAL SUCH AS VERMICULITE/SAND. SMALL QUANTITIES CAN
BE REACTED W/THE APPROPRIATE HARDENER TO SOLIDIFY.
Handling
Handling and Storage Precautions:AVOID STORAGE >100F. STORE ONLY IN
ORIGINAL CONTAINERS.
Exposure Controls
Respiratory Protection:A CANISTER TYPE RESPIRATOR MUST BE WORN IF
>TLV/PEL. WEAR DUST MASK WHEN SANDING.
Ventilation:PROVIDE LOCAL EXHAUST/MECHANICAL VENTILATION TO KEEP
Eye Protection:FACE SHIELD, CHEMICAL GOGGLES
Other Protective Equipment:USE BARRIER CREAM SUCH AS GLOVE COAT WHEN
USING THE PRODUCT
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS BEFORE EATING & DON'T SMOKE WHILE USING.
Supplemental Safety and Health
BOILING POINT CONT'D: TEMP GIVEN IS FOR STYRENE.
Chemical Properties
Boiling Pt:B.P. Text:295F (SUPP)
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:LIQUID W/SHARP AROMATIC ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, DIRECT SUNLIGHT, TEMP >100F.
Hazardous Decomposition Products:ACRID FUMES
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.