BHTYT - GSA

Product Identification

Product ID:GSA
MSDS Date:12/01/1986
FSC:8040
NIIN:00N010027
MSDS Number: BHTYT

Responsible Party
STATE CHEMICAL MANUFACTURING CO.
3100 HAMILTON AVENUE
CLEVELAND, OH 44114

Emergency Phone: 216-861-7114

Info Phone: 216-861-7114

Cage: 53798

Contractor
STATE CHEMICAL MANUFACTURING CO.
CLEVELAND, OH 44114-3701 US

Telephone: 216-861-7114

Cage: 53798

Ingredients

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: <60%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:HARMFUL OR FATAL IF SWALLOWED.CAN
CAUSE LIVER DISEASE.
Explanation of Carcinogenicity:DICHLOROMETHANE:INADEQ EVID FOR CARCIN
IN HUM,SUFF EVID IN ANIM (IARC 1987).ACGIH A2:SUSPECTED HUMAN
CARCIN (1989).
Effects of Overexposure:EYES/SKIN:DIRECT CONTACT MAY CAUSE
IRRITATION.INGESTION:HARMFUL OR FATAL IF SWALLOWED.INHALATION:VAPOR
HARMFUL.INHAL OF VAP MAY CAUSE
CONFUSION,LIGHTHEADEDNESS,NAUSEA,VOMITING & HEADACHE.CHRONIC EFFEC
TS:POSS MENTAL CONFUSION,DEPRESSION,FATIGUE,LOSS OF
APPETITE,NAUS,VOMIT,COUGH,LOSS OF SENSE OF BALANCE & VISUAL
DISTURB.
Medical Cond Aggravated by Exposure:N/K

First Aid

First Aid:EYES:IMMED FLUSH W/ LOTS OF COOL H*2O FOR AT LEAST 15 MIN.IF
IRRIT PERSISTS CONT MD.DO NOT WEAR CONTACT LENSES WHILE WORKING W/
PROD.SKIN:PROMPTLY WASH W/ LOTS OF SOAP & H*2O.IF IRRIT
PERSISTS,CONTACT MD.INGEST:INDUCE VOMIT,W/ SYRUP OF IPECAC,IF
AVAIL.GET IMMED MED ATTN.INHAL:REMOVE TO FRESH AIR.IF IRRIT
PERSISTS,CONT MD.NOTE TO MD:TRY TO AVOID EPINEPHRINE & OTHER DRUGS
WHICH BEHAVE SIMILARLY.

Fire Fighting

Flash Point Method:TOC
Flash Point:SEE SUPP DATA
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:CARBON DIOXIDE,FOAM AND DRY CHEMICAL.
Fire Fighting Procedures:WEAR PRESSURE DEMAND SCBA & FULL PROTECTIVE
EQUIP .KEEP CONTRS COOL.USE SHIELDING TO PROTECT PERSONNEL AGAINST
BURSTING,RUPTURING OR VENTING CONTAINERS.
Unusual Fire/Explosion Hazard:FLAMMABLE.CONTAINERS EXPOSED TO TEMP
ABOVE 120F,49C MAY BURST,RUPTURE OR VENT.BURNING MAY RESULT IN
FORMATION OF HCL,PHOSGENE,CO & CO*2.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF HEAT,SPARKS OR
FLAME.VENTILATE AREA.ABSORB ON INERT OIL ABSORBENT.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:FLAM.HARMFUL OR FATAL IF
SWALLOWED.CONT UNDER PRESS.DO NOT STORE NEAR FLAME,SPARKS,TEMP
>120F,49C OR IN DIRECT SUN.ALWAYS USE ADEQ VENT.(SEE SUPP DA)
Other Precautions:NO SMKG IN AREA.DO NOT USE IN GENL VICIN OF ARC
WELDING,OPEN FLAMES OR HOT SURFACES.HEAT &/OR UV RADIA MAY CAUSE
FORM OF HCL &/OR PHOSGENE .READ & FOLLOW ALL LABEL DIRECTIONS &
PREC BEFORE USE.I NTENDED FOR INDUSTRIAL AND (SEE SUPP DA)

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:VITON
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Work Hygienic Practices:DO NOT WEAR CONTACT LENSES WHILE WORKING WITH
THIS PRODUCT.
Supplemental Safety and Health
% VOLATILES BY WEIGHT:80.FL PT:BELOW 20F (25 INCH FLAME
EXTENSION).HNDLG/STOR PREC:VENT AREA AFTER SPRAYING & BEFORE SMKG
OR WORKING W/ SPARKS OR OPEN FLAME.OTHER PREC:INSTITUTIONAL USE
ONLY.NOT INTEN DED FOR HOUSEHOLD USE OR RESALE.KEEP OUT OF THE
REACH OF CHILDREN.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Evaporation Rate & Reference:N/K
Solubility in Water:<1%
Appearance and Odor:AN AEROSOL SPRAY WITH A SOLVENT-LIKE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS,STRONG CAUSTICS AND ACTIVE LIGHT METALS.
Stability Condition to Avoid:EXPOSURE TO HEAT,SPARKS OR FLAME.
Hazardous Decomposition Products:BURNING OF THIS PRODUCT MAY RESULT IN
THE FORMATION OF HCL,PHOSGENE,CO & CO*2.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT PUNCTURE OR INCINERATE
CANS.GIVE CONTAINERS TO A DISPOSAL SERVICE EQUIPPED TO SAFELY
HANDLE AND DISPOSE OF PRESSUR IZED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.