BHXFN - ID 744702, EN ALKYD LUST QD BLACK 37038
- MSDS: BHXFN
- Manufacturer: PRATT AND LAMBERT INC INDUSTRIAL COATINGS DIV
- Product Name: ID 744702, EN ALKYD LUST QD BLACK 37038
- National Stock Number: 8010-01-124-7631
Product Identification
Product ID:ID 744702, EN ALKYD LUST QD BLACK 37038
MSDS Date:05/23/1990
FSC:8010
NIIN:01-124-7631
MSDS Number: BHXFN
Responsible Party
US
Emergency Phone: 316-733-1361
Info Phone: 316-733-1361
Cage: 61196
Contractor
Telephone: 216-566-2902
Cage: 61196
Ingredients
VM & P NAPTHA (OSHA-STEL 400 PPM/1800 MG/CU.M.)
CAS: 8030-30-6
RTECS: DE3030000
Fraction By Weight: 10%
OSHA PEL 300 PPM/1350 MG/CU.M
ACGIH TLV: 300 PPM/1350 MG/CU.M
ISOBUTYL ALCOHOL (SARA III)
CAS: 78-83-1
RTECS: NP9625000
Fraction By Weight: 10%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 5 - 10%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ISOBUTYL ACETATE (SARA III)
CAS: 110-19-0
RTECS: AI4025000
Fraction By Weight: <5%
OSHA PEL 150 PPM
ACGIH TLV: 150 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
N-HEPTANE
CAS: 142-82-5
RTECS: MI7700000
Fraction By Weight: 15%
OSHA PEL 500 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9293
HEXANE (N-HEXANE)
CAS: 110-54-3
RTECS: MN9275000
Fraction By Weight: <1%
OSHA PEL 500 PPM
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
CYCLOHEXANE (SARA III)
CAS: 110-82-7
RTECS: GU6300000
Fraction By Weight: <5%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM, 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 30%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: <1%
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
VOC. 4.35 LB/GAL LESS WATER & NPRS* 522 G/L LESS WATER
RTECS: 9999999VO
VOC. 12.41 LB/GAL SOLIDS 1489 G/L SOLIDS CALCULATED
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:DAMAGE TO LIVER, PERIPHERAL NERVOUS
SYSTEM, BLOOD FORMING NERVOUS, URINARY & REPRODUCTIVE SYSTEMS.
TOLUENE CAUSES KIDNEY, LUNG & SPLEEN DAMAGE IN ANIMALS. SEE FILE
FOR ADDITIONAL INFORMATION.
Effects of Overexposure:SWALLOWED: MAY CAUSE GATROINTESTINAL
IRRITATION, NAUSEA, VOMITING. ASPIRATION OF MATERIAL INTO
LUNGS-CAUSING CHEM PNEUMONITIS, CAN BE FATAL. INHALED: NOSE OR
THROAT IRRITANT. HIGH CONC-CENTRAL NERV SY S DEPRESS; HEADACHE,
DIZZ, NAUSEA & CONFUSION. EYES: EYE IRRITATION. SKIN: MAY CAUSE
DEFATTING & IRRITATION OF THE SKIN
Medical Cond Aggravated by Exposure:KIDNEY CONDITIONS MAY BE AGGRAVATED
BY EXPOSURE TO LEAD. REPORTS ASSOCIATE PROLONG/REPEATED OVEREXPOS
TO SOLVENT W/PERMANENT BRAIN & NERVOUS SYS DAM.INTENT MISUSE BY
CONC & INHALE MAY BE HARMFUL/FATAL
First Aid
First Aid:INGEST:DON'T INDUCE VOMIT. CALL POISON CONTROL CENTER,EMERG
ROOM,DOCTOR IMMED. INHALE:REMOVE TO FRESH AIR IMMED. IF BREATH
STOP, GIVE CPR. KEEP WARM/QUIET. GET MED ATTN IMMED. EYE:FLUSH
W/LARGE AMTS O F WTR AT LEAST 15 MINS, LIFTING LIDS. GET MED ATTN.
SKIN:IMMED FLUSH AREA W/LARGE AMT OF WTR WHILE REMOVING CONTAM
CLOTHES, CONSULT DOC.TREATMENT SHOULD BE DIRECTED AT CONTROL OF
SYMP/CLINIC CONDITION
Fire Fighting
Flash Point:13 F/-10 C
Extinguishing Media:NFPA CLASS B FIRE EXTINGUISHERS FOR FLAMMABLE
LIQUID FIRES. POLYMER FOAM PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SCBA. WATER MAY BE INEFFECT, BUT USED TO
COOL EXPOSED CONTAINERS TO PREVENT PRESS BUILD-UP/AUTO
IGNITE/EXPLOSION FROM EXTREME HEAT. FOG NOZZLES PREFERABLE.
Unusual Fire/Explosion Hazard:OVEREXP TO DECOMP PRODUCT MAY CAUSE
HEALTH HAZARD. SYMPTOMS MAY NOT BE IMMED APPARENT. OBTAIN MED AID.
DANGER! EXTREMELY FLAMMABLE! VAPORS MAY CAUSE FLASHFIRE!
Accidental Release
Spill Release Procedures:WEAR RSPRTR, EYE, HAND & BODY PROTECTION. KEEP
SPECTATORS AWAY. ELIM ALL IGNITE SOURCES. DIKE & CONTAIN W/INERT
MATERIAL. TRANSFER LIQ/USED ABSORB TO COVERED METAL CONTAINER FOR
RECOVER/DISPOSAL/REMOV E W/INERT ABSORB. USE ONLY NON-SPARK TOOLS.
**
Neutralizing Agent:N/K.**AVOID CONTAM OF SEWER,STREAMS & GROUNDWATER
W/SPILLED MATERIAL/ABSORBENT.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 95 DEG F. STORE
LARGE QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106.
Other Precautions:DON'T TAKE INTERNALLY.CLOSE CONTAINER AFTER EACH
USE.KEEP AWAY FROM CHILDREN.EMPTY CONTAINER MUST NOT BE WASHED &
RE-USED FOR ANY PURPOSE. CONTAINER SHOULD BE GROUNDED & BONDED TO
THE RECEIVING CONTAI NER. DO NOT WELD, BRAZE OR CUT ON EMPTY
Exposure Controls
Respiratory Protection:REFER TO OSHA STAND. DEPENDS ON DURATION & LEVEL
OF EXPOS & COND OF USE. GEN EXPOS MAY NOT REQUIRE RESPIRATOR.
RESTRICTED:NIOSH APPROVED ORGANIC VAPOR RESPIRATOR. SPRAY:MECH
PREFILTER. CONFINED OR HIG H EXPOS: NIOSH/MSHA AIR SUPPLIED RSPRTR.
Ventilation:GEN DILUTION/LOCAL EXHAUST VENT IN VOL/PATTERN TO MAINTAIN
CONCENTRATION OF HAZARD BELOW LEL STATED. REFER TO OSHA STAND
Protective Gloves:REPEAT/PROLONG CONTACT IMPERMEABLE GLOVE
Eye Protection:ANSI Z87.1 SAFETY GLASSES, CHEM GOGGLES
Other Protective Equipment:EYEWASH FACILITY, SAFETY SHOWER. AS REQUIRED
TO PREVENT SKIN CONTACT. SEE OSHA STANDARD FOR LEAD.
Work Hygienic Practices:WASH HANDS AND FACE THOROUGHLY BEFORE EATING OR
DRINKING. DO NOT BREATHE SANDING DUST.
Supplemental Safety and Health
EMPTY CONTAINERS MUST NOT BE WASHED AND RE-USED FOR ANY PURPOSE.
CONTAINERS SHOULD BE GROUNDED AND BONDED TO THE RECEIVING
CONTAINER. DO NOT WELD, BRAZE OR CUT ON EMPTY CONTAINER. NEVER USE
PRESSURE T O EMPTY. DRUM IS NOT A PRESSURE VESSEL.
Chemical Properties
Boiling Pt:B.P. Text:>156F,>69C
Vapor Density:> THAN AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:64
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS. OXIDIZING MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
IGNITION.
Hazardous Decomposition Products:BURNING, HEATING WILL PRODUCE SMOKE,
CARBON MONOXIDE/DIOXIDE, OXIDES OF LEAD. METAL OXIDES MAY CAUSE
"METAL FUME FEVER"*
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT, SPARK & FLAME.
*SYMPTOMS:FLU-LIKE ILL W/FEVER, CHILL & COUGH. AIR PURIFY/SUPPLIED
RSPRTR MAY NEED
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE &
LOCAL LAWS. INCINERATE ONLY IN EPA PERMITTED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS. OBSERVE PRECAUTIONS OF FLAMMABLE
MATERIAL. CONTAMINATED ABSORBAN T MAY BE DISPOSED IN HAZARDOUS
WASTE LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.