BHYWZ - 124 ENAMEL, HABITABILITY COLORS (DOD-E-2460
- MSDS: BHYWZ
- Manufacturer: PRO LINE PAINT COMPANY
- Product Name: 124 ENAMEL, HABITABILITY COLORS (DOD-E-2460
- National Stock Number: 8010-00N011015
Product Identification
Product ID:124 ENAMEL, HABITABILITY COLORS (DOD-E-2460
MSDS Date:03/15/1990
FSC:8010
NIIN:00N011015
MSDS Number: BHYWZ
Responsible Party
SAN DIEGO, CA 92113-3697
US
Emergency Phone: 619-728-3192;619-274-8357
Info Phone: 619-231-2313
Preparer: E. SOETERIK
Cage: 9D157
Contractor
Telephone: 619-231-2313; 619-232-8968
Cage: 9D157
Ingredients
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 5 - 10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
BARIUM SULFATE
CAS: 7727-43-7
RTECS: CR0600000
Fraction By Weight: 53%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
ALKYD RESIN SOLUTION CONTAINING 8% VMP NAPHTHA (ING 4) &
Fraction By Weight: 33%
8% OF ING 3
CAS: 8030-30-6
RTECS: DE3030000
Fraction By Weight: SEE ING
OSHA PEL 100 PPM
ACGIH TLV: 300 PPM
39% OF ING 3.
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: SEE ING
OSHA PEL 300 PPM;400 PPM STEL
ACGIH TLV: 300 PPM
ADDITIVES; (SOLUBLE ADDITIVES CONTAINING 30% ING 7 (MINERAL
Fraction By Weight: 1%
30% OF ING 6.
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: SEE ING
OSHA PEL 300 PPM;400 PPM STEL
ACGIH TLV: 300 PPM
KEROSENE (PETROLEUM), HYDROTREATED; (MINERAL SPIRITS)
CAS: 64742-47-8
RTECS: OA5504000
Fraction By Weight: 6%
340 GR/HR.
RTECS: 9999999VO
Fraction By Weight: SEE ING
Hazards
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:MAY CAUSE DIZZ, HDCH, LOSS
OF APPETITE, WEAKNESS & LOSS OF COORDINATION. EYES:BURNING
SENSATION FROM VAP/LIQ. SKIN:BURNING SENSATION FROM VAP/LIQ. DERM,
SENSIT/RASH. NOT ACUTELY TOX. PRLNG EXPOS CAN CAUSE IRRIT & DEFAT
W/DISCOMFORT. INGEST:TOX IF SWALLOWED. CAN CAUSE BURNING SENSATION,
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NONE
Effects of Overexposure:HLTH HAZ:VOMIT, DIARRHEA, DROWS. ODOR NOT ADEQ
WARNING OF INTOX. REPORTS HAVE SHOWN THAT ASSOC RPTD & PRLNG OCCUP
OVEREXP TO SOLVS CAN CAUSE PERM BRAIN & NERV SYS DMG. INTENTIONAL
MISUSE BY DELIBERATE LY CONCENTRATING & INHALING CONTENTS MAY BE
HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:ASTHMA & SKIN ALLERGIES.
First Aid
First Aid:EYES:FLUSH IMMED W/ FRESH H*2O FOR AT LEAST 15 MIN BY HAND OR
EYE WASH EQUIP.SEEK MED ATTN.SKIN:WASH IMMED W/ H*2O.WASH W/ SOAP &
H*2O,RINSE IMMED.SEEK MED ATTN.INGEST:DO NOT INDUCE VOMIT.SEEK MED
ATT N.INHAL:MOVE TO FRESH AIR,GIVE ARTF RESP IF NECESSARY.SEEK MED
ATTN.REC:IN ACUTE CASES SEEK MED ATTN IMMED.PROVIDE DETAILED
PERIODIC EXAMINATIONS FOR WORKERS EXPOSED REGULARLY.
Fire Fighting
Flash Point Method:TCC
Flash Point:102F,39C
Lower Limits:6.0%
Upper Limits:0.77%
Extinguishing Media:WATER SPRAY,FOAM,CARBON DIOXIDE,DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . BLANKET FLAME W/EXTING MEDIA. PREVENT HUMAN EXPOSURE TO
FIRE, SMOKE, FUME, ETC.
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM HEAT, SPARKS,
OPEN FLAME. VAPORS OF COMBUSTION MAY BE IRRITATING TO RESPIRATORY
TRACT. MAY CAUSE BREATHING DIFFICULTIES.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES.PROVIDE SUFFICIENT
VENTILATION.CLEAN-UP PERSON SHOULD WEAR APPROP PROTECTIVE
EQUIPMENT.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:PROTECT CONTRS FROM PHYSICAL
DMG/SPILLS.STORE AWAY FROM HEAT IN COOL,WELL-VENTED AREA W/
SPRINKLER SYS.POST NO SMKNG SIGNS.USE ONLY W/ ADEQ VENTIL.
Other Precautions:USE PROTECTIVE MEASURES DURING MAINTENANCE OF
CONTAMINATED EQUIPMENT.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPRVD DUST/MIST RESP (HIGH
EFFICIENCY CARTRIDGES ADVISED) IF SPRAYING/SANDING. USE NIOSH/MSHA
APPRVD ORG VAP CARTRIDGE RESP IF TLV FOR SOLV COMPONENTS MAY BE
EXCEEDED, E.G. 8540 3M COR P RESP. WHEN USING IN CONFINED (SUPDAT)
Ventilation:LOCAL EXHAUST WHEN APPLYING IN CONFINED AREAS. KEEP VAPORS
BELOW TLV.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE PROT CLTHG.CHANGE CONTAMINATED CLTHG
IMMED.PROVIDE EMER SHOWERS/EYEWASH AT STATIONARY PAINT APPLICATION
FACILITIES.
Work Hygienic Practices:TRAIN EMPLOYEES ON ALL SPECIAL HANDLING
PROCEDURES BEFORE EMPLOYEES WORK WITH PRODUCT.
Supplemental Safety and Health
RESP PROT:AREA, USE NIOSH/MSHA APPROVED AIR-FED HOOD.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:300F,149C
Decomp Temp:Decomp Text:N/K
Vapor Pres:6.9 @ 20C
Vapor Density:3.9
Spec Gravity:1.6
Evaporation Rate & Reference:0.36 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORED LIQUID WITH MILD PETROLEUM ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAMES.DO NOT ALLOW
VAPORS TO ACCUMULATE.
Hazardous Decomposition Products:FLAMMABLE FUMES MAY ACCUMULATE IN
CONFINED AREA AND BE IGNITED BY SPARKS OR OPEN FLAMES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSE OF ALL WASTES I/A/W FEDERAL, STATE &
LOCAL REGULATIONS. PUT MATERIAL IN METAL CONTAINER MARKED "DO NOT
REUSE". USE VERMICULITE OR OTHER INERT ABSORBENT. KEEP AWAY FROM
SEWER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.