BHZRX - ADHESIVE: RUBBER BASE
- MSDS: BHZRX
- Manufacturer: KERR CORP
- Product Name: ADHESIVE: RUBBER BASE
- National Stock Number: 6520-00-765-0986
Product Identification
Product ID:ADHESIVE: RUBBER BASE
MSDS Date:08/31/1994
FSC:6520
NIIN:00-765-0986
MSDS Number: BHZRX
Responsible Party
ORANGE, CA 92667-5000
Emergency Phone: 714-516-7400
Info Phone: 714-516-7400
Cage: LO931
Contractor
Telephone: 714-516-7400
Cage: LO931
Ingredients
ACETONE; DIMETHYL KETONE; 2-PROPANONE
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 46%
OSHA PEL 750 PPM
ACGIH TLV: 750 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (IARC CARC- GROUP 3) *96-1*
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 15%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 14%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION. SKIN: MAY
CAUSE IRRITATION & DERMATITIS. INHALATION: MAY CAUSE RESPIRATORY
SYSTEM IRRITATION. INGESTION: MAY CAUSE GI IRRITATION. SOLVENT
ASPIRATION INTO LUNGS DURING VOMIT ING MAY CAUSE LUNG DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDNESS, SMARTING, TEARING,
SWELLING, DEFATTING, DRYNESS, CRACKING, NAUSEA, VOMITING, DIARRHEA.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 10 MINS. SKIN:
WASH AREA W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR
IF NEEDED. INGESTION: DON'T INDUCE VOMITING. GIVE 2 GLASSES OF
WATER/MI LK TO DRINK. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:28F
Lower Limits:2.6
Upper Limits:12.8
Extinguishing Media:CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR A SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:EXTREMELY FLAMMABLE. OVERHEATED, CLOSED
CONTAINERS ADJACENT TO FIRE COULD EXPLODE DUE TO PRESSURE BUILDUP.
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES. COLLECT MATERIAL,
CLEAN-UP RESIDUE & STORE IN CLOSED METAL CONTAINER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DARK PLACE. KEEP AWAY
FROM IGNITION SOURCES. KEEP CONTAINER CLOSED WHEN NOT IN USE. USE
ACCORDING TO DIRECTIONS.
Other Precautions:AVOID UNNECESSARY EXPOSURE.
Exposure Controls
Respiratory Protection:WEAR A SELF-CONTAINED BREATHING APPARATUS WHEN
VAPORS EXCEED 100 PPM.
Ventilation:LOCAL EXHAUST: SUFFICIENT TO KEEP CONCENTRATION <100 PPM.
MECHANICAL (GENERAL): RECOMMENDED.
Protective Gloves:IMPERVIOUS, NEOPRENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYEWASH
Work Hygienic Practices:HANDLE IAW/GOOD PERSONAL HYGIENE & SAFETY
PRACTICES.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:132F
Vapor Pres:180
Vapor Density:2
Spec Gravity:0.88
Evaporation Rate & Reference:(ETHER = 1): 1.9
Solubility in Water:SLIGHT
Appearance and Odor:BROWN LIQUID W/STRONG KETONE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS.
Stability Condition to Avoid:HEAT & IGNITION SOURCES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION/BURNING:
FORMALDEHYDE & NITROGEN PRODUCTS.
Conditions to Avoid Polymerization:EXCESSIVE HEAT.
Disposal
Waste Disposal Methods:COMMERCIAL INCINERATION. OTHERWISE, DISPOSE OF
IAW/FEDERAL, STATE & LOCAL REGULATIONS. FLAMMABLE LIQUID UN1133.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.