BJBXV - FORMO CRESOL
- MSDS: BJBXV
- Manufacturer: HENRY SCHEIN INC
- Product Name: FORMO CRESOL
- National Stock Number: 6850-00F012219
Product Identification
Product ID:FORMO CRESOL
MSDS Date:01/01/1987
FSC:6850
NIIN:00F012219
MSDS Number: BJBXV
Responsible Party
PORT WASHINGTON, NY 11050
Emergency Phone: (516) 621-43000
Info Phone: (516) 621-43000
Cage: 64682
Contractor
Telephone: (516) 621-4300
Cage: 64682
Ingredients
FORMALDEHYDE (SARA III)
CAS: 50-00-0
RTECS: LP8925000
Fraction By Weight: 48.5%
OSHA PEL SEE 1910.1048
ACGIH TLV: C 0.3 PPM; A2; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
CRESOL, ALL ISOMERS (CRESYLIC ACID) (SARA III)
CAS: 1319-77-3
RTECS: GO5950000
Fraction By Weight: 48.5%
OSHA PEL S, 5 PPM
ACGIH TLV: S, 5 PPM; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CAUSES TEARING & SEVERE
IRRITATION. INHALATION: IRRITATION TO RESPIRATORY TRACT. INGESTION:
STOMACH PAIN, & PULMONARY EDEMA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: CAUSE TEARING & SEVERE IRRITATION.
INHALATION: IRRITATION TO RESPIRATORY TRACT. INGESTION: STOMACH
PAIN, & PULMONARY EDEMA.
First Aid
First Aid:EYES/SKIN: FLUSH W/WATER FOR 15 MINS. INHALATION: REMOVE FROM
CONTAMINATED AREA & USE OXYGEN IF NEEDED.
Fire Fighting
Flash Point Method:PMCC
Flash Point:154F
Extinguishing Media:FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:USE AIR-SUPPLIED RESCUE EQUIPMENT FOR ENCLOSED
AREA.
Unusual Fire/Explosion Hazard:DON'T PRESSURIZE, CUT, HEAT, WELD OR
EXPOSE SUCH CONTAINERS TO FLAME.
Accidental Release
Spill Release Procedures:USE FOAM TO CONTROL VAPORS. FLUSH AREA W/WATER
SPARINGLY & USE ABSORBANTS TO CONTAIN/REMOVE SPILLS. NEUTRALIZE
W/AMMONIA & COMPLEX W/SODIUM SULFITE.
Neutralizing Agent:AMMONIA, SODIUM SULFITE.
Handling
Handling and Storage Precautions:STORE IN CLOSED CONTAINERS & LABEL
CORROSIVE. AVOID CONTACT W/SKIN.
Exposure Controls
Respiratory Protection:FULL-FACE NIOSH APPROVED FORMALDEHYDE & ACID GAS
CARTRIDGE.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL: NOT RECOMMENDED.
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:IMPERVIOUS BODY COVERING/BOOTS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:392F
Vapor Pres:1.0
Vapor Density:NIL
Spec Gravity:1.058
pH:4.05
Evaporation Rate & Reference:(BU AC = 1): 0.3
Solubility in Water:MISCIBLE
Appearance and Odor:BROWN COLORED LIQUID W/PUNGENT ODOR.
Percent Volatiles by Volume:38
Stability
Stability Indicator/Materials to Avoid:YES
CAUSTICS, STRONG ALKALIES, ISOCYANATES, ANHYDRIDES, INORGANIC ACIDS
Stability Condition to Avoid:HIGH TEMPERATURES, HEAT
Hazardous Decomposition Products:FORMALDEHYDE GAS, CO
Disposal
Waste Disposal Methods:INCINERATION, BIOLOGICAL OXIDATION W/PROPER
ACCLAIMATION OF SYSTEM, LANDFILL ONLY IF SOLIDIFIED PRIOR TO
DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.