BJBYS - ISOSIT MICRO ADHESIVE
- MSDS: BJBYS
- Manufacturer: VIVADENT USA INC
- Product Name: ISOSIT MICRO ADHESIVE
- National Stock Number: 6520-00F012233
Product Identification
Product ID:ISOSIT MICRO ADHESIVE
MSDS Date:06/16/1986
FSC:6520
NIIN:00F012233
MSDS Number: BJBYS
Responsible Party
TONAWANDA, NY 14151
Emergency Phone: (716) 694-2333
Info Phone: (716) 694-2333
Preparer: BUCHEL
Cage: 6S143
Contractor
Telephone: (716) 694-2333
Cage: 6S143
Ingredients
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 70.0%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
DIBUTYL PHTHALATE (SARA III)
CAS: 84-74-2
RTECS: TI0875000
Fraction By Weight: 5.0%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; 9192
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
HYDROCARBON RESIN
Fraction By Weight: 20%
POLYMETHYLMETHACRYLATE, METHYL METHACRYLATE POLYMER
CAS: 9011-14-7
RTECS: TR0400000
Fraction By Weight: 5%
Hazards
LD50 LC50 Mixture:ORAL RAT LD50 = 7,400 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: MAY BE HARMFUL. SKIN:
IRRITATION, DEFATTING ACTION. INHALATION: HEADACHE, MUCOUS
MEMBRANES & UPPER RESPIRATORY TRACT. EYES: IRRITATING.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: MAY BE HARMFUL. SKIN: IRRITATION &
DEFATTING ACTION. INHALATION: HEADACHE, MUCOUS MEMBRANES & UPPER
RESPIRATORY TRACT. EYES: IRRITATING.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH W/PLENTY OF WATER
& SOAP, REMOVE CONTAMINATED CLOTHING. EYE: RINSE W/PLENTY OF WTER
UNTIL IRRITATION STOPS, SEEK MEDICAL CARE. INGESTION: SEEK MEDICAL
CARE.
Fire Fighting
Flash Point:-19C
Lower Limits:2.3%
Upper Limits:13%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM OR TETRACHLORIDE
Unusual Fire/Explosion Hazard:INFLAMMABLE LIQUID, KEEP CONTAINERS
CLOSED DANGEROUS WHEN EXPOSED TO HEAT OR FLAMES.
Accidental Release
Spill Release Procedures:TREAT W/SOLUTION BINDING MATERIAL AS SAND OR
SAWDUST COLLECT IN SUITABLE CONTAINERS.
Handling
Handling and Storage Precautions:STORE IN A COOL, VENTILATED PLACE W/NO
EXPOSURE TO SUNLIGHT. AVOID CONDITIONS WHICH MAY RESULT IN
DISPERSION TO WATERS (STREAM/WATERWAYS/LAKE, ETC).
Other Precautions:DON'T EMPTY INTO DRAIN. USE REASONABLE CARE TO AVOID
CONTACT W/SKIN, EYES, & MUCOUS MEMBRANES.
Exposure Controls
Ventilation:GOOD LOCAL EXHAUST VENTILATION RECOMMENDED
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:56C
Vapor Pres:240
Evaporation Rate & Reference:(ETHER = 1): 2.1
Appearance and Odor:LIQUID, CLEAR, LIGHT YELLOW, FRAGRANT MINT LIKE
ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:HEAT, FLAMES, SUNLIGHT
Disposal
Waste Disposal Methods:BURN IN A INCINERATION FOR CHEMICAL WASTES.
FEDERAL, STATE & LOCAL LAWS TAKE PRECEDENCE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.