BJCDJ - TRIMAGNESIUM PHOSPHATE OCTAHYDRATE
- MSDS: BJCDJ
- Manufacturer: STAUFFER CHEMICAL COMPANY
- Product Name: TRIMAGNESIUM PHOSPHATE OCTAHYDRATE
- National Stock Number: 6810-00F012302
Product Identification
Product ID:TRIMAGNESIUM PHOSPHATE OCTAHYDRATE
MSDS Date:01/01/1987
FSC:6810
NIIN:00F012302
MSDS Number: BJCDJ
Responsible Party
Emergency Phone: (203) 222-3000
Info Phone: (203) 222-3000
Cage: DO667
Contractor
Telephone: (203) 226-6602
Cage: DO667
Ingredients
MAGNESIUM PHOSPHATE, TRIBASIC
Fraction By Weight: 100%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. INGESTION:
ABDOMINAL DISCOMFORT, KIDNEY DAMAGE/DISORDER, GASTROINTESTINAL
IRRITATION, LNAUSEA, VOMITING, CRAMPS, DIARRHEA, CNS DEPRESSION.
INHALATION: RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:AN EXTENSIVE SEARCH OF THE LITERATURE FAILED TO
REVEAL ANY DOCUMENTED CASES OF INDUSTRIAL ILLNESS FROM EXPOSURE TO
TRIMAGNESIUM PHOSPHATE.
First Aid
First Aid:INGESTION: GIVE LARGE AMOUNTS OF WATER OR WARM SALTY WATER TO
INDUCE VOMITING. OBTAIN MED ATT. EYES: FLUSH W/LARGE QUANTITIES OF
RUNNING WATER FOR 15 MINS. DON'T ATTEMPT TO NEUTRALIZE W/CHEMICAL
AGENT S. OBTAIN MED ATT. OILS OR OINTMENTS SHOULDN'T BE USED UNLESS
DIRECTED BY PHYSICIAN. SKIN: FLUSH AFFECTED AREAS W/WATER. OBTAIN
MED ATT. INHALATION: REMOVE FROM CONTAMINATED ATMOSPHERE. SEE
PHYSICIAN.
Fire Fighting
Flash Point:NOT FLAMMABLE
Fire Fighting Procedures:THIS PRODUCT ISN'T FLAMMABLE. DUST MASKS OR
SKIN PROTECTION MAY BE NECESSARY IF DUSTING IS EVIDENT OR SLURRY
SOLUTIONS AE BEING SPLASHED.
Unusual Fire/Explosion Hazard:NONE. THIS PRODUCT ISN'T COMBUSTIBLE NOR
DOES IT SUPPORT COMBUSTION.
Accidental Release
Spill Release Procedures:TO FOLLOW FOR MINOR SPILLS IS TO SWEEP UP THE
MATERIAL, TRANSFER TO A CONTAINER, & DISCARD IN THE GENERAL DUMP.
RESIDUE MAY BE WASHED AWAY W/WATER.
Handling
Handling and Storage Precautions:A COOL, DRY, WELL-VENTILATED AREA THAT
IS OUT OF THE DIRECT RAYS OF THE SUN IS RECOMMENDED. IT SHOULD BE
INSPECTED ROUTINELY.
Other Precautions:IT'S NOT A CORROSIVE COMPOUND TO STEEL & ALSO CAN BE
HANDLED EASILY IN MOST PLASTICS.
Exposure Controls
Respiratory Protection:DUST MASKS APPROVED RESPIRATORS
Eye Protection:GOGGLES
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:400C
Vapor Density:23
Solubility in Water:INSOLUBLE
Appearance and Odor:POWDERED SOLID; WHITE; NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
MINERAL ACIDS
Stability Condition to Avoid:WATER OF HYDRATION WILL BE DRIVEN OFF AT
TEMPERATURES >400C.
Disposal
Waste Disposal Methods:MUST BE HANDLED ACCORDING TO A PREDETERMINED
PLAN. FOR ASSISTANCE IN DEVELOPING SUCH A PLAN, CONTACT STAUFFERS
TECHNICAL SERVICE DEPARTMENT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.