BJCYQ - VARGLAS SILICONE RUBBER SLEEVING
- MSDS: BJCYQ
- Manufacturer: VARFLEX CORP
- Product Name: VARGLAS SILICONE RUBBER SLEEVING
- National Stock Number: 5970-01-122-4872
Product Identification
Product ID:VARGLAS SILICONE RUBBER SLEEVING
MSDS Date:04/27/1989
FSC:5970
NIIN:01-122-4872
MSDS Number: BJCYQ
Responsible Party
ROME, NY 13440
US
Emergency Phone: 315-337-2642
Info Phone: 315-336-4400
Cage: 79074
Contractor
Telephone: 315-336-4400
Cage: 79074
Ingredients
FIBERGLASS
OSHA PEL 15 MG/M3(TOTAL DUST)
ACGIH TLV: 10 MG/M3 (DUST)
SILICONE RUBBER
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN-ACUTE: TRANSIENT MECHANICAL
IRRITATION; CHRONIC: NONE. EYE-ACUTE: DIRECT CONTACT WILL CAUSE
MECHANICAL IRRITATION; CHRONIC: NONE. INGESTION-ACUTE: UNLIKELY TO
OCCUR; CHRONIC: NONE.
Explanation of Carcinogenicity:MANUFACTURER INDICATED THIS MATERIAL IS
REGULATED BY OSHA AS A CARCINOGEN. FIBROUS GLASS DUST HAS A TLV OF
10 MG/M3.
Effects of Overexposure:MECHANICAL IRRITATION TO SKIN AND EYES.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF AILMENTS
OR WITH A PRE-EXISTING DISEASE INVOLVING THE SKIN OR RESPIRATORY
TRACT MAY BE AT INCREASED RISK FROM EXPOSURE.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: IMMEDIATELY FLUSH WITH
PLENTY OF WATER FOR 15 MINUTES HOLDING EYELIDS OPEN. GET MEDICAL
ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP &
WATER. GE T MEDICAL ADVICE IF IRRITATION PERSISTS. INGESTION: NOT
EXPECTED TO BE A PROBLEM.
Fire Fighting
Autoignition Temp:Autoignition Temp Text:NONE
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:WEAR A NIOSH/MSHA APPROVED RESPIRATOR IF
VENTILATION DOES NOT MAINTAIN INHALATION EXPOSURES BELOW PEL/TLV.
WEAR SELF-CONTAINED BREATHING APPARATUS IF REQUIRED FOR HIGH LEVELS
OF CONTAMINATES.
Ventilation:MECHANICAL (GENERAL) AND LOCAL VENTILATION IS RECOMMENDED.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:SAFETY GLASSES IF REQUIRED.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH EXPOSED AREAS WITH SOAP AND WATER. LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE. KEEP WORK AREA CLEAN.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:N1
Decomp Temp:Decomp Text:482F,250C
Spec Gravity:2.25
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GLASS BRAID ELECTRICAL INSULATION SLEEVING,
NONSHRINKABLE, BLACK SILICONE RUBBE
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURES >250C
Hazardous Decomposition Products:METHYL & PHENYL BY PRODUCTS
Disposal
Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN LANDFILL IN
ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL
REGULATIONS. BURNING IS NOT RECOMMENDED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.