BJDNS - BULLET TIP PAINT YELLOW 4006
- MSDS: BJDNS
- Manufacturer: SANITEK PRODUCTS INC
- Product Name: BULLET TIP PAINT YELLOW 4006
- National Stock Number: 8010-01-076-5489
Product Identification
Product ID:BULLET TIP PAINT YELLOW 4006
MSDS Date:08/17/1990
FSC:8010
NIIN:01-076-5489
MSDS Number: BJDNS
Responsible Party
LOS ANGELES, CA 90039-1107
US
Emergency Phone: 213-245-6781
Info Phone: 213-245-6781
Cage: 54666
Contractor
Telephone: 213-245-6781
Cage: 54666
Ingredients
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
OSHA PEL C 50 PPM
ACGIH TLV: C 50 PPM,VAPOR; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
COMPLEX ORGANIC PHOSPHATE ESTER
OSHA PEL 1 PPM
ACGIH TLV: 1 PPM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: NOT EXPECTED TO PRODUCE EFFECTS
DUE TO HIGHVISCOSITY. EYE: IRRITATION. SKIN: IRRITATION. HARMFUL
IF SWALLOWED, MAY CAUSE CNS DEPRESSION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS
Medical Cond Aggravated by Exposure:DISORDERS INVOLVING THE EYES, THE
CENTRAL NERVOUS SYSTEM AND THE RESPIRATORY SYSTEM.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR, GET MD. EYE: IMMED FLUSH
W/RUNNING WATER 15 MIN, LIFTING UPPER AND LOWEREYELIDS
OCCASIONALLY. GET MD IMMED IF IRRITATION PERSISTS. SKIN: WASH
W/SOAP & WATER, REMOVE CONTAM CLOTHING & WASH BEFORE REUSE.
INGEST: INDUCE VOMITING IF VICTIM CONSCIOUS. GET MD. IF UNCON, GIVE
NOTHING BY MOUTH.
Fire Fighting
Flash Point:NONE
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SCBA. USE WATER
SPRAY TOCOOL NEARBY CONTAINERS AND STRUCTURES EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:NONE KNOWN
Accidental Release
Spill Release Procedures:MOP UP OR ABSORB ON SUITABLE ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID FREEZING OR OVERHEATING. DO NOT
TRANSFER MATERIAL TO UNLABELED CONTAINERS. KEEP CONTAINERS TIGHTLY
CLOSED. STORE IN COOL PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE NEEDED UNDER NORMAL USE CONDITIONS
Ventilation:USE ADEQUATE VENTILATION
Protective Gloves:WATER RESISTANT
Eye Protection:NOT NORMALLY REQUIRED
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:17.5 @20C
Vapor Density:<1
Spec Gravity:1.08
pH:8@20F
Evaporation Rate & Reference:<1(H*20=1)
Solubility in Water:DISPERSES
Appearance and Odor:COLORED (VARIOUS) OPAQUE SLURRY WITH MILD ODOR
Percent Volatiles by Volume:66
Stability
Stability Indicator/Materials to Avoid:YES
SEE ABOVE
Stability Condition to Avoid:STRONGLY IONIC AQUEOUS SOLUTIONS MAY
COAGULATE THEPOLYMERS.
Hazardous Decomposition Products:BURNING WILL PRODUCE TOXIC FUMES
Disposal
Waste Disposal Methods:INCINERATE AT APPROVED WASTE FACILITY IAW FED,
STATE & LOCAL REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.