BJFPC - 31012/31038/CMX13

  • MSDS: BJFPC
  • Manufacturer: SYBRON CHEMICALS INC
  • Product Name: 31012/31038/CMX13
  • National Stock Number: 4610-00-363-5770
Product Identification

Product ID:31012/31038/CMX13
MSDS Date:10/21/1985
FSC:4610
NIIN:00-363-5770
MSDS Number: BJFPC

Responsible Party
SYBRON CHEMICALS INC
BIRMINGHAM RD
BIRMINGHAM, NJ 08011
US

Emergency Phone: 609-893-1100

Info Phone: 609-893-1100

Cage: 76465

Contractor
SYBRON CHEMICALS INC,SUB OF SYBRON CORP
66 BIRMINGHAM, NJ 08011 US

Telephone: 609-893-1100

Cage: 76465

Ingredients

CATION EXCHANGE POLYMER

CAS: 69011-20-7

Fraction By Weight: 20-25%


WATER

CAS: 69011-20-7

Fraction By Weight: 50-60%


ANION EXCHANGE POLYMER

CAS: 69011-20-7

Fraction By Weight: 20-30%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:CAN CAUSE EYE IRRITATION. MAY
CAUSE SKIN IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:FLUSH EYES WITH COPIOUS QUANTITIES OF WATER FOR 15
MINUTES. GET MD. SKIN:FLUSH WITH WATER.

Fire Fighting

Extinguishing Media:DRY CHEMICAL, CO*2 OR WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
OR EQUIVALENT.
Unusual Fire/Explosion Hazard:TOXIC DECOMPOSITION PRODUCTS.

Accidental Release

Spill Release Procedures:SLIPPERY FLOOR. SWEEP UP SPILLED MATERIAL.
DISPOSE AS ORDINARY TRASH.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:MATERIAL SHOULD NOT BE ALLOWED TO DRY
OUT. AVOID FREEZING OR STORING FOR LONG PERIODS ABOVE 100F.
Other Precautions:AVOID CONTACT WITH STRONG OXIDIZING AGENTS SUCH AS
NITRIC ACID.

Exposure Controls

Respiratory Protection:NONE REQUIRED.
Ventilation:NORMAL ROOM.
Protective Gloves:USE IMPERVIOUS GLOVES.
Eye Protection:USE CHEMICAL WORKERS GOGGLES.
Other Protective Equipment:LOCAL EYEWASH FACILITIES
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
THIS IS NOT A KIT. THIS IS PART B OF A THREE PART SINGLE PRODUCT.

Chemical Properties

Spec Gravity:1.1-1.3
pH:6-8
Evaporation Rate & Reference:1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MIXTURE OF DARK AND LIGHT SPHERICAL BEADS, ODORLESS
Percent Volatiles by Volume:50-60%

Stability

Stability Indicator/Materials to Avoid:YES
CONTACT WITH STRONG OXIDIZING AGENTS, NITRIC ACID.
Stability Condition to Avoid:TEMPERATURES ABOVE 400F.
Hazardous Decomposition Products:CO, CO*2, DIVINYLBENZENE, STYRENE,
SO*2, SO*3, N(CH*3)*3, NH*3

Disposal

Waste Disposal Methods:DISPOSAL OF THIS MATERIAL, ITS RINSINGS OR SPILL
RESIDUES MUST BE I/A/W ALL APPLICABLE FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.