Product ID:D-4
MSDS Date:10/01/1988
FSC:6850
NIIN:00F012848
MSDS Number: BJGPZ

CHROMATEC INC.

100 FENCL LANE
HILLSIDE, IL 60162

Emergency Phone: (800) 323-0242

Info Phone: (800) 323-0242

Cage: FO619

CHROMATEC INC.

HILLSIDE, IL 60162

Telephone: (800) 323-0242

Cage: FO619

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 100%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: DEFATTED. EYES: IRRITATION
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: DEFATTED. EYES: IRRITATION

First Aid:SKIN: CLEAN W/WATER. EYES: IRRIGATE W/WATER. INHALATION:
REMOVE TO FRESH AIR.

Flash Point Method:TCC
Flash Point:17.8C
Lower Limits:2.6%
Upper Limits:12.8%
Extinguishing Media:CO2, DRY CHEMICAL, ALCOHOL FOAM.
Fire Fighting Procedures:WATER DILUTION BUT NOT A HOSE STREAM.
Unusual Fire/Explosion Hazard:SPARKS, OPEN FLAME & TEMPERATURES >120F.
USE NON-SPARKING ELECTRICAL EQUIPMENT/SOURCES.

Spill Release Procedures:SMALL AMOUNTS MIX W/SAND & BURN. ELIMINATE ALL
IGNITION SOURCES, FLUSH HEAVILY W/WATER. ATOMIZE INTO AN
INCINERATOR. LARGE AMOUNTS ATOMIZE INTO AN APPROVED COMBUSTION
CHAMBER.

Handling and Storage Precautions:EXTREMELY FLAMMABLE, KEEP AWAY FROM
HEAT, SPARKS, & FIRE.

Respiratory Protection:FULL FACE MASK W/ORGANIC CHEMICAL CANISTER OR
SUPPLIED AIR.
Ventilation:LOCAL EXHAUST: PREFERRED. MECHANICAL EXHAUST: ACCEPTABLE
Protective Gloves:RUBBER
Eye Protection:FACE SHIELD, SAFETY GLASSES
Supplemental Safety and Health

Boiling Pt:B.P. Text:133F
Vapor Pres:182
Vapor Density:2.00
Spec Gravity:0.788
Evaporation Rate & Reference:(BU AC = 1): >1
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS LIQUID, PUNGENT ODOR
Percent Volatiles by Volume:99.99%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:STORAGE 120F. SPARKS, OPEN FLAME, HEAT,
IGNITION SOURCES, ELECTRICAL EQUIPMENT
Hazardous Decomposition Products:CO, CO2
Conditions to Avoid Polymerization:LOW TEMPERATURES WHEN IN THE
PRESENCE OF CATALYSTS-CONDENSATION WILL OCCUR. NO: IF TEMPERATURE
RISES, REACTION STOPS.

Waste Disposal Methods:ELIMINATE ALL IGNITION SOURCES, FLUSH HEAVILY
W/WATER. ATOMIZE INTO AN INCINERATOR.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.