BJLDX - TT-S-711C
- MSDS: BJLDX
- Manufacturer: TRIAD PAINT AND CHEMICAL CORP
- Product Name: TT-S-711C
- National Stock Number: 8010-00-281-2076
Product Identification
Product ID:TT-S-711C
MSDS Date:01/01/1987
FSC:8010
NIIN:00-281-2076
MSDS Number: BJLDX
Responsible Party
BROOKLYN, NY 11207
US
Emergency Phone: 718-443-2778
Info Phone: 718-443-2778
Cage: 33151
Contractor
Telephone: 201-437-6501
Cage: 33151
Ingredients
PIGMENTS
Fraction By Weight: 6.6%
VEHICLE
Fraction By Weight: 93.4%
SOLVENTS
Fraction By Weight: 62.4%
ACGIH TLV: 100 PPM
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:VAPORS MIGHT BE IRRITATING TO EYES,
NOSE & THROAT. POSSIBLE DEFATTING TO SKIN.
Effects of Overexposure:VAPORS MIGHT BE IRRITATING TO EYES, NOSE &
THROAT. REPEATED EXCESSIVE EXPOSURE MAY RESULT IN HEADACHE,
DIZZINESS, SLEEPINESS & NAUSEA. POSSIBLE DEFATTING TO SKIN.
First Aid
First Aid:INHALATION: PROVIDE FRESH AIR & REST. SKIN CONTACT: WASH WITH
MILD SOAP & WATER. USE EMOLLIENT CREAM OR LOTION. EYE CONTACT: WASH
WITH A GENTLE STREAM OF WATER FOR 10 MINUTES. SEE A DOCTOR.
Fire Fighting
Flash Point Method:PMCC
Flash Point:105 F/41 C
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM, CO2, DRY CHEMICALS.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF-CONTAINED
RESPIRATORS. WATER STREAM WILL SPREAD OIL FIRES.
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL
SURFACES & OTHER SOURCES OF IGNITION. VAPORS FORM EXPLOSIVE MIXTURE
BETWEEN UPPER & LOWER EXPLOSIVE UNITS.
Accidental Release
Spill Release Procedures:AVOID FLAMES & SPARK SOURCES. PROVIDE ADEQUATE
VENTILATION. WIPE UP SPILL WITH INERT ABSORBENT(S) & NON-SPARKING
TOOLS. SAFELY DISCARD SATURATED ABSORBENT(S). AVOID PROLONGED
BREATHING OF VAPORS WHILE CLEANING UP SPILL.
Handling
Handling and Storage Precautions:AVOID OPEN FLAME & SPARK SOURCES.
PROVIDE ADEQUATE VENTILATION. AVOID EXCESSIVE HEAT.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
CONTACT WITH SKIN. AVOID PROLONGED OR REPEATED BREATHING OF VAPORS.
Exposure Controls
Respiratory Protection:ORGANIC CANNISTER MASK OR AIR PACK IF
VENTILATION IS INADEQUATE.
Ventilation:MECHANICAL (GENERAL) WITH APPROVED CLASS D EXPLOSION PROOF
MOTOR & SWITCHES.
Protective Gloves:NEOPRENE RUBBER GLOVES.
Eye Protection:CHEMICAL SAFETY GOGGLES.
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:315 TO 382F
Vapor Pres:100 F
Vapor Density:5.0
Spec Gravity:.901
Evaporation Rate & Reference:.13 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK WALNUT COLORED LIQUID. HYDROCARBON ODOR.
Percent Volatiles by Volume:72
Stability
Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CO, CO2, ACRID FUMES & SMOKE WHEN
COMBUSTED.
Disposal
Waste Disposal Methods:DISPOSAL PROCEDURES MUST COMPLY WITH LOCAL,
STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.