Product ID:ACRYLIC ENAMEL REDUCER, COOL TEMP
MSDS Date:11/10/1987
FSC:8010
NIIN:01-046-2975
MSDS Number: BJMHJ

PPG INDUSTRIES INC

260 KAPPA DRIVE
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: 93915

PPG INDUSTRIES INC CHEMICAL DIVISION

PITTSBURGH, PA 15222-1416 US

Telephone: 304-843-1300

Cage: 93915

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 20%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

2-BUTOXY ETHYL ACETATE

CAS: 112-07-2

RTECS: KJ8925000

Fraction By Weight: 10%

OSHA PEL NOY ESTABLISHED

NAPHTHA, LIGHT ALIPHATIC SOLVENT

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 45%

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 25 - 30%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:IRRITATION TO EYES, SKIN, NOSE,
THROAT, & RESPIRATORY SYSTEM. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING AND INHALING THE CONTENTS CAN BE HARMFUL OR FATAL.
Effects of Overexposure:EYE WATERING, HEADACHES, DIZZINESS, LOSS OF
COORDINATION ARE INDICATIONS THAT SOLVENT LEVELS ARE TOO HIGH.
REDNESS, ITCHING, BURNING SENSATION & VISUAL DISTURBANCES MAY
INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS & SWELLING ARE CONDITIONS ASSOCIATED WITH
EXCESSIVE SKIN CONTACT.

First Aid:IF SWALLOWED: DO NOT INDUCE VOMITING. EYE CONTACT: FLUSH
IMMEDIATELY WITH PLENTY OF WATER FOR 15 MINUTES. SKIN CONTACT:
FLUSH IMMEDIATELY WITH PLENTY OF WATER FOLLOWED BY WASHING WITH
SOAP & WATER. IN HALATION: REMOVE TO FRESH AIR. APPLY CPR & OTHER
SUPPORTIVE MEASURES AS REQUIRED. OTHER: FOR ANY OF THESE
CONDITIONS, CONTACT POISON CONTROL CENTER, EMERGENCY ROOM, OR
PHYSICIAN IMMEDIATELY.

Flash Point Method:PMCC
Flash Point:12F/.11C
Lower Limits:1.5
Extinguishing Media:USE NFPA EXTINGUISHERS FOR FLAMMABLE LIQUID FIRES.
USE CARBON DIOXIDE, DRY CHEMICAL, OR UNIVERSAL FOAM.
Fire Fighting Procedures:USE WATER SPRAY TO COOL CLOSED CONTAINERS TO
PREVENT PRESSURE BUILDUP & POSSIBLE AUTO-IGNITE/EXPLOS. IF WATER IS
USED, FOG NOZZLES ARE PREFERRABLE. WEAR SCBA.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FORM HEAT/ELEC EQUIP/SPARKS/FLAME TO PREVENT EXPLOSION. DO NOT
APPLY ON HOT SURFACES.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED W/PROPER RESPIRATORY & SKIN & EYE PROTECTION SHOULD BE
PERMITTED IN AREA. REMOVE ALL IGNITE SOURCES. TAKE UP SPILL
W/SAWDUST, VERMICULITE, OR OTHER ABSORBENT MATERIAL & PLACE IN
CONTAINER FOR DISP.

Handling and Storage Precautions:DO NOT STORE ABOVE 120 DEGREES F.
STORE LARGE QUANTITIES IN BUILDING DESIGNED AND PROTECTED FOR
STORAGE OF NFPA CLASS IB FLAMMABLE LIQUIDS.
Other Precautions:BEFORE BLENDING MULTIPLE COMPONENT MIXTURES, READ
MATERIAL SAFETY DATA SHEET TO BE AWARE OF ANY HAZARDOUS PARTS.
CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID FREE FALL OF
LIQUIDS IN EXCESS OF A F EW INCHES.

Respiratory Protection:OVEREXPOSURE TO VAPORS MAY BE PREVENTED BY
ENSURING VENTILATION CONTROLS, VAPOR EXHAUST OR FRESH AIR ENTRY.
NIOSH/MSHA APPROVED PAINT SPRAY OR AIR SUPPLIED RESPIRATORS MAY
ALSO REDUCE EXPOSURE. READ R ESPIRATOR MANUFACTURER'S INSTRUCTIONS.
Ventilation:PROVIDE GENERAL OR LOCAL EXHAUST VENTILATION TO CONTROL
CONCENTRATE OF HAZARDOUS INGREDIENTS.
Protective Gloves:WEAR IMPERMEABLE GLOVES
Eye Protection:CHEMICAL-TYPE SPLASH GOGGLES/FACE SHIELD
Other Protective Equipment:IMPERMEABLE APRON OR NITRILE RUBBER,
NEOPRENE, OR POLYVINYL ALCOHOL.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
ALL CHEMICAL SUBSTANCES IN THIS PRODUCT COMPLY WITH ALL APPLICABLE
RULES OR ORDERS UNDER THE ENVIRONMENTAL PROTECTION AGENCY'S TOXIC
SUBSTANCES CONTROL ACT.

Boiling Pt:B.P. Text:132 TO 378F
Vapor Pres:81.8 MMHG
Vapor Density:> THAN AIR
Spec Gravity:.79
Evaporation Rate & Reference:405
Solubility in Water:20.2 %
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS DECOMPOSITION
PRODUCTS WHEN HEATED, INCLUDING: CARBON MONOXIDE.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEME NT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.