Product ID:SILASTIC 732 RTV SEALANT-CLEAR
MSDS Date:11/07/1985
FSC:8030
NIIN:00-538-5212
MSDS Number: BJMYX

Emergency Phone: 517-496-5900

Info Phone: 517-496-4000

Preparer: JACK L SHENEBERGER

Cage: 5D028

Telephone: 219-461-4000

Cage: 72983

ACETOXYSILANE. TLV/PEL BASED ON ACETIC ACID (MFR).

Fraction By Weight: 5%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM; 15 PPM STEL

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:MAY IRRI W/SLIGHT PAIN,REDNESS &
POSS MINOR CORNEAL INJURY.SKIN:A SINGLE EXPOS FOR SEVERAL HOURS MAY
CAUSE SLIGHT REDDENING.LONGER/RPTD CONTACT MAY CAUSE MOD IRRIT &
POSS A MILD BURN. INHAL: NO E FTS EXCEPT VERY SLIGHT IRRIT/PAIN TO
THE EYE OR RESP PASSAGES. INGEST: AMTS TRANSFERRED TO THE (SEE SIGN
& SYMP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: MOUTH BY FINGERS, ETC, DURING NORMAL
OPERATIONS SHOULD NOT CAUSE INJURY. SWALLOWING SUBSTANTIAL AMTS MAY
CAUSE SOME INJURY. COMMENT: NO KNOWN AVERSE CHRONIC HLTH EFTS, BUT
UNNECESSARY EXPOS SHOULD BE AVOIDED. THIS PROD MAY ENHANCE
ALLERGIC CONDITIONS ON CERTAIN PEOPLE.
Medical Cond Aggravated by Exposure:NONE KNOWN TO MANUFACTURER.

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. GET MD IMMED. SKIN:
WIPE OFF AND FLUSH WITH WATER. INHAL: REMOVE TO FRESH AIR. GET MD
IMMED. INGEST: GET MD IMMED.

Flash Point Method:OC
Flash Point:>250F,>121C
Extinguishing Media:WATER FOG, CO*2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRES.
Unusual Fire/Explosion Hazard:NOT KNOWN TO MANUFACTURER.

Spill Release Procedures:REMOVE PRODUCT AND USE ABSORBENT MATERIAL TO
TAKE CARE OF ANY OIL-LIKE RESIDUES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE BELOW 90F/32C. USE REASONABLE
CARE AND CAUTION.
Other Precautions:NONE KNOWN TO MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED ACID GAS/ORGANIC VAPOR TYPE
RESPIRATOR UNLESS LOCAL EXHAUST VENT IS ADEQUATE OR AIR SAMPLING
DATA SHOWS EXPOSURES ARE WITHIN TLV, PEL GUIDELINES.
Ventilation:MECHANICAL (GENERAL) RECOMMENDED.
Protective Gloves:RUBBER OR PLASTIC GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:RUBBER OR PLASTIC APRONS, BOOTS, ETC.
Work Hygienic Practices:WASH AT MEALTIME, AT END OF SHIFT AND BEFORE
SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5 MM @77F
Spec Gravity:1.05 @ 77F
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:<0.1%
Appearance and Odor:ACETIC ACID-LIKE, PASTE, CLEAR

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Stability Condition to Avoid:AIR OR MOISTURE CAUSES POLYMERIZATION AND
ACETIC ACID VAPORS ARE FORMED.
Hazardous Decomposition Products:SILICON DIOXIDE, CARBON DIOXIDE, AND
TRACES OF INCOMPLETELY BURNED CARBON PRODUCTS

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.