Product ID:STOODY BUILD-UP LH,DYNAMANG LH,SELF-HARDEN.
MSDS Date:06/12/1990
FSC:3439
NIIN:00-165-4172
MSDS Number: BJNTX

STOODY CO

16425 GALE AVE
INDUSTRY, CA 91749
US

Emergency Phone: 818-968-0717

Info Phone: 818-968-0717

Cage: 57965

STOODY CO

90032 BOWLING GREEN, KY 42102-9032 US

Telephone: 502-781-9777

Cage: 57965

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0 - 20%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0 - 10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 1 - 10%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 0 - 1%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0 - 1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 45 - 90%

OSHA PEL 10 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 0 - 10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

CALCIUM FLUORIDE

CAS: 7789-75-5

RTECS: EW1760000

Fraction By Weight: 0 - 5%

OSHA PEL 2.5 MG/M3 (F)

ACGIH TLV: 2.5 MG/M3 (F); 8990

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 0 - 10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

GRAPHITE, NATURAL

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: 0 - 3%

OSHA PEL 15 MPPCF RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9293

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SHORT TERM EXPOSURE TO WELDING FUMES
MAY RESULT IN DISCOMFORT SUCH AS DIZZINESS,NAUSEA,DRYNESS OR
IRRITATION OF NOSE,THROAT AND EYES.ARC RAYS CAN BURN SKIN.HEAT RAYS
CAN INJURE EYES.CHRONIC:WELDING FU MES CAN CAUSE SIDEROSIS(IRON
DEPOSITS IN THE LUNG)AND AFFECT PULMONARY FUNCTION.
Explanation of Carcinogenicity:NICKEL AND CHROMIUM ARE CONSIDERED
CARCINOGENS.
Effects of Overexposure:EXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA, FEVER, DRYNESS AND/OR
IRRITATION OF NOSE, THROAT AND EYES. SKIN SENSITIVITY MAY ALSO BE
NOTED. WATERY EYES, HEADACHE, BREA THING DIFFICULTY, FREQUENT
COUGHING AND/OR CHEST PAINS MAY OCCUR FROM ACUTE EXPOSURE. TOXIC
GASES CAN BE FATAL.
Medical Cond Aggravated by Exposure:SOME WORKERS MAY BE AFFECTED BY A
PRE-EXISTING CONDITION OR OTHER OCCUPATIONAL ILLNESS BECAUSE OF THE
WIDE VARIATION IN INDIVIDUAL SUSCEPTIBILITIES.

First Aid:IN CASE OF ELECTRICAL SHOCK,TURN OFF POWER PRIOR TO REMOVAL
FROM EXPOSURE AREA AND ADMINISTRATION OF FIRST AID.REMOVE FROM
EXPOSURE AREA AND CALL FOR MEDICAL AID.ADMINISTER OXYGEN IF
BREATHING IS DIFF ICULT.IF NOT BREATHING,BEGIN
ARTIFICIALRESPIRATION.EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY
THE AMERICAN RED CROSS.

Flash Point:NONFLAMMABLE
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE MAY CAUSE PRODUCTION OF HAZARDOUS
FUMES

Spill Release Procedures:NOT RELEVENT

Handling and Storage Precautions:WEAR GLOVES AND FLAME RETARDANT
CLOTHING WHEN CUTTING, GRINDING OR WELDING. DO NOT EXPOSE SKIN TO
RADIATION WHEN NOT CUTTING OR WELDING.
Other Precautions:PROVIDE PROTECTIVE SCREENS TO SHIELD OTHERS. WHEN
ELECTRODES AND FLUXES ARE CONSUMED, THE FUME AND GAS DECOMPOSITION
PRODUCTS GENERATED ARE DIFFERENT IN FORM FROM THE INGREDIENTS
LISTED. NEW COMPOUNDS NOT IN THE ELECTRODES MAY FORM.

Respiratory Protection:USE WELD FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN CUTTING, GRINDING OR WELDING IN A CONFINED SPACE OR
WHERE LOCAL EXHAUST OR GENERAL VENTILATION DOES NOT KEEP EXPOSURE
BELOW RECOMMENDED LIMITS. USE ONLY NIOSH APPROVED RESPIRATORS.
Ventilation:USE ENOUGH VENTILATION WHEN CUTTING, GRINDING OR WELDING TO
KEEP THE DUST, FUMES & GASES FROM THE WORKERS BREATHING ZONE
Protective Gloves:WELDERS LEATHER GLOVES
Eye Protection:HELMET OR FACE SHIELD W/LENS
Other Protective Equipment:FLAME RETARDANT CLOTHING WHEN CUTTING,
GRINDING OR WELDING. DO NOT EXPOSE SKIN TO RADIATION WHEN HOT
CUTTING OR WELDING.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING OR SMOKING.
LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
PRODUCT NAME:STOODY BUILD-UP LH,DYNAMANG
LH,SELF-HARDENING,1027,1105,2110,RC-2660.WELDING AND HOT CUTTING
FUMES & GASES CANNOT BE CLASSIFIED SIMPLY. THEIR COMPOSITION AND
QUANTITY ARE DEPENDENT ON THE METAL BEING WELDED, THE PROCEDURES,
PROCESSES AND THE TYPE OF WIRE OR ELECTRODES USED.

HCC:N1
Solubility in Water:NONE GIVEN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
STRONG MINERAL ACIDS
Stability Condition to Avoid:FLAMES
Hazardous Decomposition Products:FLUORIDES & COMPLEX OXIDES OF
IRON,MANGANESE & SILICON;SECONDARY COMPLEX OXIDES OF
CHROMIUM,NICKEL,MOLIB,CA,NA, & K

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT.DISCARD ANY PRODUCT,RESIDUE,DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER,IN FULL COMPLIANCE
WITH FEDERAL, STATE & LOCA L REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.